I Built a LEGO Submarine!
Вставка
- Опубліковано 8 вер 2024
- Check out Krazy Ky's Bricklink Store for your LEGO brick needs!
store.bricklin...
Check out the 360° Dive video HERE: • 360° LEGO Submarine DIVE
In this video i build a LEGO Submarine and then test it to see how deep it can go... This was hard.. :)
Get your Ooblots! www.ooblot.com
LABOR DAY WEEKEND SALE!!!
August 30 - September 4
25% DISCOUNT AT CHECKOUT
@BrickExperimentChannel Video: • Building a Lego-powere...
John 3:16
Jesus loves you! :)
Follow Me On Socials!
TikTok: / brick_science
Instagram: / brickscience_official
Twitter: / rileysc66496964
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting my channel.
Check out the 360 DIVE video HERE: ua-cam.com/video/cxdSCaMb44Q/v-deo.html ;)
e
I watched it already
Sure!
This video was awesome I’ll watch that one too!
ok
13:43 fish is probably wondering what the heck that weird long shape is doing in his lake 💀
LOL
😂👍
“What the hell”
"hmmm, thats very fishy"
@@1-1311socksenslidersWHY MUST YOU MAKE SUCH A PUN.
My grandson, Ryder, is obsessed with building with Legos and we found this Channel and you have inspired him in so many ways. He just watched this video and had some ideas:
" How about you put pneumatic tubes inside the submarine so it will suck the water out of the submarine so it wont be filled with water when you bring it up."😃😃
😮
That’s an interesting idea…
Way to think outside the box Ryder! Thanks for watching 😃
Hope to see you around the comments more often 🤜💥🤛
@@Brick_Scienceyeah, try making the titanic! Like the set, but floating.😊
Make it way bigger and put sponges in the hull to keep the inside dry. @Brick_Science
@@Brick_Science
He is best
So wholesome 😭
Make sure he doesn’t take this one down to the titanic wreckage
Don't worry, it's not run by a $30 video game controller so I don't think he will
Naww I’m dead💀💀💀
It also isn’t built like a tin can
Booooom
I hope so
Try using a water proof or tight tape or if it doesn’t work put tape on the first layer of the wall and then build put the second layer of blocks and then you’ll have tape on the first part of the wall and then the second part is covering it
Or just straight up gorilla glue.
@@Mista_Freshuhe doesn’t like glue on Lego
USE FLEX TAPE LOL
@@fraserr851bad
Realy
You can apply a type of glue called silicone adhesive inside your electronics; it won't harm them and will keep water out. To make sure it functions, make sure you place it everywhere.
4:33 HOW is that lego! Crazy how much lego has evolved🔥
Hi
yo
@@-BRICKSnCARS- hello
yep
Fish are like what is this…
Who just randomly found him and can’t stop watching him
Me me me
Me me me me me me
Me
Me
Same.
I would recommend using Magnets for the propeller with non-friction tape
I saw that as an option- but I didn’t want to copy his idea 💡 😊
Those poor navy minifigs drowned 😭
First les goooo
@@VR_SH4RKkid
No way only three replys to the b3
Rest In Lego Pieces 😢
oof
You should work at LEGO itself! The things you make with LEGO are INCREDIBLE.
Wow, thank you!
@@Brick_ScienceNo problem, keep up the great work B) :D
Yea
YES
I really agree
you can use silicone adhesive (some sort of glue) to put inside your electronics, It keeps water out and It doesnt damage them. Make sure to put It everywhere to ensure It works
This man keeps one upping himself
To keep water out, spray it with sealant/varnish.
He should try that
now make it fire CO2 Canisters
.
@@scottmeyer4192 torpedoes buddy.
@@Fortified-Star-Margarine .
lets start a lego war
@@scottmeyer4192.
Captain :)
Lego used to sell plastic bags so technically you can use them (since Lego sold them) and the bag would waterproof the submarine’s insides
For anyone confused, submarines sink by filling ballast tanks (which are water tanks) with water from the sea, and pumping out the water to rise
Edit:
Oh he explains it later in the video lol
Thanks Mr obvious for repeating what he said
11:43 bro is so ripped 😭
Fr
Imagine being the minifigures, you have to just stand there as your submarine sinks
at 7:25 he magically transfers a mini fig to his other hand
If you want to make it more watertight you can overlap the bricks over the cracks 3 times then put plastic rap in the middle then it will be more watter proof
Sup man. You gotta build that lego moving turtle. It would be sick
Your LEGO submarine goes underwater, but mine just goes into my stomach 🤣🤣🤣
but how you can do that? I'm so curious
What do mean
I am so confused 🫤
@@Cookinglazybut me too
Why didn’t you use duct tape? 😭
It will look TERRIBLE
And it’s not lego
@@qqwwddff it would look better than Random Lego stickers
Flex tape is best
@@ManuelLopez-ht3ug I’m Phil swift and I sawed this boat in half
2:49 Litteraly a titanic engine but used in a different way
brick science never fails to impress me
Fr
Bot
Idk
@@DTAM-Aviationshorts290ig you are a bot
@@DTAM-Aviationshorts290 blud is more of a bot than me
I was waiting for the jaws music to kick in 😅
Tokyo drift
Dont let OceanGate see this
☠️
?
They would fail at this
Naaa
Ok?
You are the smartest Lego person in the world 😮
Riley you are the best, just keep trying and you are going to reach all your goals that you want to reach
If you don’t plan on taking it apart can use Flex-seal
2:18 this is how steam trains move
Now build a fully functioning Lego rocket
Didnt Hafu go do that
@@MatiasZelaya-kv7htI think if yes he didn’t make one
Just don’t name it the challenger
This is great. I will share it with my coworkers and you shall be graded lol
Nice vid Riley I found a cool lego channel with an awesome short... BM Studios... (The profile is a minifigure with a violin) His one short is a minifigure getting burnt at the stake! If you watch it please leave some kind of comment so I know you watched it... Your channel is cool!!!
Even though this sub is a disastrous failure he still tries his best to push through and create awesome content
You are my favorite UA-camr. Thanks for great content ❤
You're the best!
Make a Lego boat that uses a layer of Lego technic air tanks (plugged so they don't fill with water) as the first layer to make it float.
Crazy how nice this man's vids are ❤
Glad you enjoy it! ❤️🤜💥🤛
@@Brick_Scienceyooo i enjoyed it too!
Would plumbers putter in-between the Legos work?
dang how many lego peices do you even have?
7 maybe 7.2
He can open a lego store with all the lego pieces he has
What’s crazier is that he still needs to buy Lego off bricklink even with that many bricks
@@Darth_Bdang
I've always wanted to do this as a kid lol
Thx for making my dreams a reality
2:32 bro turned into a science teacher
Add a pump system to keep the water out
Edit: brick science pls see this
Try watertight compartments so if one floods it might not sink and cover it around the rooms
One thing to maybe consider trying is spraying it with a clear varnish layer or three after finished building. Shouldn’t be too difficult to take apart after but might be enough to seal it from the water. Can buy cheap cans of it at Home Depot or Lowe’s for like, $6 a can.
You could've rapped it in plastic completely and left a 1 block gap to accommodate the rapping
You could maybe 3d print 1 solid inner tube with studs and negative studs so and then have a lid at one end where you can waterproof tape it up?
Find a company the makes rubber seals that you can put in between the bricks
This was a really fun idea, but you should definately put it all in a watertight, plastic box. That would allow for making a waterproofed propellershaft and rudder assembly, with only the moving parts and not the motors outside the plastic box. The depth gauge and the little interior was also a cool idea, and I would love to see this attempted again! You're the first guy to actually make a lego submarine look like a submarine and not just a plastic box with electric machinery in it
The sticker at the end is just a piece of paper with some glue, so it’s understandable that it can’t stop water from leaking in.
If you want to avoid any permanent damage to the Legos, I suggest applying a layer of Vaseline inside and outside the well to seal the crack.
You could also use a layer of paper clay, which might work even better.
All your videos are great, but something about this one is really good 👍
That was such an unexpected ending! Nice job as always!
Thank you!!
Here is a idea you should put Clay in the Lego cracks
You should make a working Lego boxing in a Lego sports video
that was an amazing boat
Dang, I always wish I had enough pieces to make cool stuff like you
Love your videos! Always a ton of fun! Have a Brick Time Building!
Loved this video dude. Keep making awesome Lego content!
making something for it to survive long enough for it to get destroyed is probably super hard but super easy at the same time
It is crazy how along with Lego, the thought put into things as well as the engineering has evolved!❤
Now I know that this channel is about making the impossible possible❤
Fun Fact: the first Submarine that bared the name Nautilus (named after the sub from the Juelz Vern novel A Thousand Leuges below the Sea) was a modified WW1 submarine from America
And was also in the 1950’s the Us Navy’s first nuclear powered submarine’s name built in Groton, Connecticut.
bro your sister is a saver without her you cant make videos please I want to thank her
ayyy that was awesome!!!
Warning, multiple leviathan class creatures detected, are you sure whatever you're doing is worth it?
What?
@@finnomeara8630 subnautica reference
@@TheWysperingMyst shoot my bad
man seeing a working lego submarine is AWSOME!
do this, but with the Titanic
Sacrifice the lego and glue it together with a water tight gel based glue. So every seam is sealed, also an expanding foam hull, these are your simplest options 👌🏻
on the corners, you should have stuck a 2x sticker, partially place it on an edge and cut the excess at the point in which the corner would be and fold to overlay
bruh this guy is hthe best lego builder ever and the fact that he builds all of this from scratch without instructions insane bruv keep it up love ur vids
This might be a dumb idea but you should add a ziplock bag and combine the stickers and the plastic wrap together in your upcoming boat project!
theres a special glue that lego builders, for like lego land use to pretty much weld things together. you'd have to be careful but it would work, by basically melting the plastic and recombining them both, so it should make a seal
I’ve been where you launched the sub it’s a very scenic place👍
Shoutout to your sister who seems to always be supporting the channel!
Does anyone else realise that dude perfect and brick science post at the exact same time on the exact same day😮
If you don’t need to reuse the bricks, you could just use a thin layer of clear spray paint on the inside. Outside too, if you don’t mind the aesthetics.
5:37 your edit is actually wrong, what you said was correct
you should try placing every thing in a jar and surround it in legos, for the moters you can connect them with strong magnets to the outside
try building water pumps to pump the water out again so when theres water inside those pumps will pump the water out and everything stays dry
Bro, try melting the stickers that you have tried to make that box waterproof with a lighter so that they remain air tight and it will remain dry for a long time. I'm sharing this because it worked with a bismark battleship that ive built
Flex seal would be a pretty solid option, similar idea with an independent hull but then coat the entire thing in flex seal making it a solid body, then use flex tape for cables and securing electronics
You could use flex seal but the spray type so it doesn't take up that much space. Hope this helps!
I think you could use a lot of glue in between the Lego bricks so that water doesn’t get inside
The nascar stickers is crazy
I'm glad that the fish didn't attack the submarine and the crews are safe 🫡
You have to pressurize the cabin as the air is getting pressure on it. Which means that it is sucking in water to fill out the empty space. You can see it when the submarine was going up as the air expanded slowly
I got one big tip, on how to make lego watertight!
Don't use bricks that are 2 studs wide, the best way to stop te water, is to use bricks that are 1 stud wide, then place them in 3 rows behind one another, in alternate paterns, this prevents the water from seeping through the cracks and does a way better way to slow it down.
Now you can keep stacking it up to make water tight walls, that is if you keep using 1 stud wide bricks, 3 layers thick.
I hope this will help in the next Video!
use stickers on the cracks between the walls as well to keep the water out even more
can’t wait for him to build a war zone from legos
Why is this man so fun to watch tho when he does water videos
Maybe use two plastic bags and one on each end and tape them together with waterproof duck tape 😁
use surface tension, basiclly just pack it with expanding foam (this may ruin lego and devices so keep it controlled)
The way I got a LEGO ad while watching this
Some options
- polyurethane fill the bricks (this can't be undone thought!)
- build your boats, bricks studs-down (each brick is a little boat)
- use 0.2mm poly to fill the gaps between brick faces
- add technic pieces in "illegal" orientations to stress/compress bricks
- conformal coat your electronics
- conformal coat the final assembly
What if you made some tanks? It could have motors, and fit mini figs. Extra points for a functional gun. (That is if it has a giant battleship cannon. Like the German wonder weapon.)
Why not use a soda plastic bottle instead of the box, you could cut it to put inside all the electric components and glue it again with silicone, then you just need to build the exterior around the bottle
Fun fact USS Nautilus was the name for the first Nuclear powered submarine for the Navy in the 50’s built in Groton, Connecticut.
Use duct tape or some other kind of tape that has a non-water soluble adhesive. Also, use an old tupperware container with a hole drilled in it to seal the electronics, then tape over the hole. Or just find a waterproof Lego motor, I'm sure somebody makes them.
4:14 Ah! Clever mechanism! Can't wait for Brick Science video "I Built a flying LEGO Airplane!" :)
Make a tower to pair with it