How To Remove & Install Power Steering Pump Pulley

Power steering pump pulley removal and installation!
Are you wondering how to remove the power steering pump pulley or how far to press on the power steering pulley? We have you covered!
If you've pulled off your power steering pump pulley and broken or damaged it in the process, don't worry! LMR has you covered with this power steering pump pulley! This pulley is an integral part of the drive system for belt-driven steering pumps. If you're replacing, or even servicing your power steering pump, it's highly recommended to replace the pulley at the same time.
5.0 Resto has these power steering pump pulleys made to the exact OE dimensions but made from durable steel construction, unlike your factory plastic pulley. Each replacement power steering pump pulley is quality tested to ensure trouble-free performance and durability.
______________________________________________________
Shop
82-93 Fox Body Mustang power steering pump pulley 5.0:
lmr.com/item/LRS-3674P/power-...
79-93 Fox Body Mustang Steering Pumps:
lmr.com/products/79-93-Mustan...
85-93 Fox Body Mustang power steering bracket:
lmr.com/item/LRS-9998926/50re...
85-93 Mustang power steering pump retaining bolts:
lmr.com/item/LRS-9998926HWDK/...
______________________________________________________
Watch
How To Remove & Install Power Steering Pump | Fox Body Mustang (79-93)
• How To Remove & Instal...
How To Flush And Bleed Power Steering Fluid System:
• How To Flush And Bleed...
______________________________________________________
UA-cam: latemodelres.to/youtube-subsc...
Facebook: / latemodelresto
Instagram: / latemodelresto
TikTok: / latemodelresto
#LMR #50resto #FoxBody
______________________________________________________
Use of this video is subject to the terms as set forth in our LMR Install Video Disclaimer | lmr.com/page/lmr-install-vide...

[@johnhutchison9782]

Nice Capri!🤘😛🤘

[@michellemack9101]

That was a big help I really appreciate it

[@josephchamberlain9129]

Just what I needed

[@hallz9117]

A straight edge off the crank pulley is a great line up tool, the belt alignment between the power steering pump & crank is crucial point. Otherwise , if pump locks up so does the belt and the crank pulley will eat the belt when it jumps out of its groove.

[@motor_citymuscle288]

Why am I having such a hard time getting this pulley back on. Are there Ford and Chevy puller/installer kits???? Wtf the as I tighten the nut the bolt going into the pulley (that’s bottomed out) loosens.

[@POLOAZTECA]

The bolt on the loner tool I got caves in the center hole of the pulley shaft. Why does it only happens to Me? Doing the exactly same thing with same tool and same car as in UA-cam videos and I'm the only one seeming to have problems!

[@ayyy9017]

Do you guys have a link for this pulley remover tool? I recently bought one but it wasn’t the right size so I’m hesitant about buying another one.

[@latemodelrestoration]

OTC part # 4530 is the kit that we used. I sourced a longer installer screw with the correct thread pitch for both the installer bearing and pump. You can do the same by going to your local hardware store. I can't remember the thread pitch off the top of my head. Hope this helps! -Landan

[@GaryYoung-eq1ph]

Why after replacement have a noise situation like cricket sounds on econoline

[@latemodelrestoration]

I'd suggest you look over everything and try to troubleshoot the noise. -Landan

[@user-df4ie1jk7c]

How do I get a spoke pully off

[@latemodelrestoration]

If it's a press-on style pulley, use the steps in the video with the correct puller/installer tool for you application.

[@hallz9117]

I know it just happened to me 😂

[@jasonmyer9447]

What happens when the pulley will not go back on?

[@latemodelrestoration]

Make sure the pulley is even with the pump shaft. I'm not sure what else to tell you. -Landan

[@dividedwefall5382]

I guess you'd need a new one. But sounds like you might just need someone else to do it.
Might need to elaborate more