How To Fix windows Was Unable To Complete The Format - 100% Solved
Вставка
- Опубліковано 14 вер 2019
- Hii Friends Welcome Back My Channel MK Tech.....
In This Tutorial How To Fix windows Was Unable To Complete The Format ....
Follow My Tutorial Steps Properly.........
Thanks For Watching...................................
................................................................. - Наука та технологія
It was still on 0 percent since morning💀☠️
Did it ever work
@@emilianovillarreal3335 never ever ... All the other comments are fake
i think the bigger the disk, the longer it takes
ngl, it works on me tho
i tried to format 472gb external hdd, takes a bit longer
i think its 1 percent per 2 minutes
Im waiting for 7 hours. Still showing 0😢
Me too
It's going to 2 hours now still showing 0 percent
After 100 videos watched problem not solved but your solution ultimate works ....Koti 2 thanks
The way you show the solution is extraordinary bro keep going I think this is the best video that I ever watched on UA-cam and that's the thing that you solve my problem thank you ❤
It only took a lot of time compared when you format with GUI, but it worked. This is the exact video that I'm finding straight forward no bullshit explanation. Thanks !
Error Showing "DiskPart has encountered an error: The parameter is incorrect. See the system event log for more information"
I'm getting this too
What should I do
Yes also this problem
@@tahira8344 Bhai mera toh 0 percent pe hi rukh gaya hai
@@okmylifemyrules I got to know afterwards that my pendrive was currupted 🙁
That's why it couldn't get formatted
Bro that happened to me but eventually the format randomly worked!! ITS AMAZING!!
Thanks tried a couple other procedures no luck, your procedure work perfectly.
+Jim Secula Welcome Friend.......
Sir, on CMD after 100% complete formatting it is written disk part has encountered an error : The parameter is incorrect. See the system event log for more information. Please provide solution
You were the guy i was searching, thanks a lot man
Super solution..
Step by step... Very useful
there is no partition selected....... what to do
Awesome...
Great Video, very simple and helpful...!
🎉👍👌
Thanks for your video.......SUPER GRATEFUL!!!
Bro..
It is showing that :
Diskpart has encountered an error : The parameter is incorrect. See the System Event Log for more information.
It is showing after following your steps correctly by watching video at slow speed...
Please have a solution against this problem.
Please have positive reply..🙏🙏
Got the same issue 😪😪 ⚠️
did you get solved later?
@@javeria_khalid did you get solved later
Thank you so much I tried many videos but your video works 100% subscribed 😍
thank you so much dude, it helped me to fix my issue
Thanks alot for this tutorial,it helped me save my hardrive and files.Thumbs up
DISKPART> select partition 1
There is no partition selected.
mee tooo, i have a * before partition 1
What solution
@@Gautam4983 put * before partition 1
try ( list volume )
@@tseegiitseegii2221 thanks bro it works for me
Please help: after I did all steps and see 100 percent completed.... i see message says : diskpart has encountered an error ; the parameter is incorrect. See the system event log for more information .....what to do now ??? Please answer my question
Thank You for posting such a useful video, shall format the disk at earliest
Problem: It says "There is no volume selected
Please select a volume and try again"
Same here
Same here
select volume 1
after formate
@@agunzone2.0 still didn't work
Thanks a lot, u made my day.. Hats off.. Proper procedure..
Great video, used this verbatim worked a treat, thanks my friend, keep them coming
Hey bro I just want to say Thank you so much because your procedure worked giiiii😁💓
Eyy it worked tysm.People be patient and follow instructions strictly it worked.Like magic 29 gb came back to me.(If u have problems in slow progress it might be ur usb or hard drive is too big like 32 gb up so it might be a factor tho
Thanks a lot my friend you really know your stuff the only video I could that really solve my problem
It says that there are no partitions
Same for me. Did you figure this out? And if you did what do I do?
@Leano Gamer then what?
I did it but its telling me options alot do you have a contact so you can help me
THANKS
@Leano Gamer that doesn't work I found another method
Thank you very Much. May God bless you. God may enlighten your mind more.
Thanku mere Bhai ✨ , love you
hey bro thanks you saved my day
Wow! you 're amazing! thank you so much !!
This video is really helped me bro after trying soo much finally thorugh your vudeo i was able to format my sd card
When I did it, it stays on 0 Percent? How come?
Have the same problem,maybe you found any solution ?
Same issue😓
did u find any solution?
Really it is the greatest video ever I have seen. Thank you very much.
Great yr maza aaa gyaa…subo sy try kr rha tha kbi koi kbi koi lekin ab ja k hua
thank u so much..tried so many other methods..its finally working
disk part intervention did not solve problem for my external ssd nor did your vid on windows unable to complete the format now what/ should I take my external ssd and have it checked out?
Thanks Brother I Love This Vadieo
Thanks and good very useful this video
after entering fs=ntfs , i press ENTER. but does not appear. percentage. what to do ? thanks
After entering select partition 1
“ There is no partition selected.”
Comes
that pops up for me too any fix yet?
@@Besturtle33same with me I just continued regardless
Thank u so much it really work's
Thanks its working bro thanks so much 😍😍
Thanks Man! You Earned A Sub!
thanks bro its working
Welcome friend
@@mktech123 after list partition command
Cmd is giving ' * Partition 1 ______' as output
Mine says "the volume size is too small" It's a 64gb san disk but it shows a capacity of 32mb. I need help please
Wow it really fixed by problem 😀 100 👉👍 for U
It is showing in last 100 percent completed diskpart has encounntered an error: The request is not supported. See the system event log for more information.
Plz help
what a nice bro no more chatting
that was good very clear
I did exactly that on 2 SSD one of 2 the other of 4 TB everything works fine but format stays at 0%! I do not see what else I could do. Any suggestion.
Very informative video bhai thanks 🤞😊❤️
Thanks bro best of luck
Thanks sir it's working
U r genius on computer system tq bro
It says( format is not allowed on the current boot, system ,pagefile , crashdump or hibernation volume .)
Great it's working .....Thanks👍
So far this is the only one that worked after going into the registry, then using this method. So far it's at 66% formatting an NTFS
Mine is saying “there is no volume selected”
What should I do?
@@urbad8468 when are you encountering this? the partitions or the disks?
THANKS A LOT FOR YOUR INFORMATION
When I type select partition 1, I got there is no partition selected , pls what should I do?
Thanks it is working
Bro my disk 0 problem then ????.Can I select disk 0?? Because disk 1 is my ssd...pls reply
Did all the thing u mentioned but there is no partiton selected shown here what the prob here idk
for some reason mine end up like this
100 percent completed
DiskPart has encountered an error: The parameter is incorrect.
See the System Event Log for more information.
it is showing there is no partition selected when i type select partition 1
how to fix it please! tell me
sir,
Format fs=ntfs ke bad
Diskpart has encountered an error: The parameter is incorrect see the system event log for more information.
He Error yet ahe
Thanks you sir,, succsess
good bro !
Shows only one disk after entering "list disk" command whereas I have got 4 disk partitions... Any solutions?
Thanks 🙂
This worked for me ...thanks
what if I don't have a partition on my USB and after a "clean" or "create partition primary" unmount my USB?
showing this message - "100 percent completed.... : diskpart has encountered an error ; the parameter is incorrect. See the system event log for more information." what does this mean and how to solve the issue further. kindly let me know.
Thank you man
Mine shows disk formatted successfully at end but upon opening my PC again, disk is unformatted. What to do?
Same with mine
I tried this method and after trying to format fs=ntfs it freezes in 0 percent completed and the flash drive light just blinks without doing anything. There is no physical damage to the pendrive. Any ideas?
Same :(
same.. bro, plz reply
Me too. i need more ideas
Same🙁
Do it again! Leave it for few hours, and do not disturb your laptop. It works after few hours.
Great work bro.. It still works
I tried this and it didn't work for me as it says for me There is no partition selected and i typed in select partition 1
Format is not allowed in the current boot page file or hibernation volume
Stuck on 0% while trying the format.
Thankue bhai jan❣️☺️🙏🙏
Oh shit. It works! Thank you..Thank you very much!!
Thanks bro it's working
I select the disk an partition, I can see the star next to the disk when I type in list disk which indicates the disk is selected, but when I try to format it still says "There is no volume selected. Please select a volume and try again."
It's an SD card that was used in a CCTV camera, so I suspect it's reached its write limit and it's now dead... in the bin it goes! I appreciate your video though :)
I got the same problem. How did you solved it ?
Thanks brother ❤️
diskpar is not recognized as an integral or external command, operable command or batch file
Best video ever in Utube♥️❤️
Thanks ♥️❤️
Thanks bro, it’s working.
Take love, may allah bless you
@Streezy yahah wahyuuu
Format is not allowed on the current boot, system, pagefile crashdump or hibernation volume
"There is no volume selected please select a volume and try again."
same
Same please help
Thank u its working
What an explanation!🙌🏽
Thanks
Topic should be~ Final solution to format your SD card ....👍😊🤗😁
NOPE
I have a strange problem in my sd card my sd card doesn't formats and even if i delete a file it comes again any solutions
i have no partition in my pen drive there i found a message on command prompt = There is no partition selected. Now how to format my pen drive. Please answer me
super prooooo 🎉🎉
It took lots off time but it's work bro good ❤❤
Tried it but it says that the disk you specified is not valid? 😭
Thanks sir great info
Can't solve the problem.. when 100% completed my pc says: diskpart has an encountered error
really thank you