12-VOLT 32700 BITEK BATTERY (STEP BY STEP PROCESS) with BMS & ACTIVE BALANCER | Para sa Newbie!
Вставка
- Опубліковано 21 жов 2024
- 12-VOLT 32700 BITEK BATTERY
This STEP-BY-STEP PROCESS of making or assembling 12-VOLT 32700 BITEK BATTERY PACK is dedicated to all “newbie” renewable energy enthusiasts who have an untapped interest in the field of SOLAR, LITHIUM BATTERIES and other forms of Alternative Energy.
Parts:
40 pieces Bitek 32700
1 pc 30amps BMS
1.4 Amps Active Balancer
Wire tabbing
Battery holders
Bolts and nuts
Supplier: JRV SOLAR
SOLAR POWER SYSTEM
1. On-grid - also known as a grid-tie (or connected to Distribution Utility) solar power system
2. Off-grid - also known as a stand-alone power system which completely not connected from the Distribution Utility, like Meralco or other Electric Cooperatives.
All solar power systems work on the same basic principles. Solar panels first convert solar energy or sunlight into Direct Current power using what is known as the photovoltaic effect. Such DC power can then be stored in a battery or converted by a solar inverter into Alternating Current (AC) power which can be used to run home appliances and other Alternating Current (AC) devices.
The primary the role of the solar inverter is to convert the Direct Current power to Alternating Current in order to run home appliances and other Alternating Current (AC) devices . In a ‘string’ inverter system, the solar panels are linked together in series, and the Direct Current electricity is brought to the inverter which converts the Direct Current power to Alternating Current power.
Batteries used for solar energy storage are available in two main types, lead-acid and lithium-Ion phosphate or LIFEPO4 battery.
An on-grid or grid-tie solar power systems are by far the most common and widely used by homes and businesses. These systems do not need batteries and use either solar inverters and are connected to the public electricity grid. Any excess solar power that you generate is exported to the electricity grid and you usually get paid or credits for the energy exported thru NET METERING SYSTEM which shall be approved by the concerned Distribution Utility prior to achievement of ZERO BILLING status. However, an on-grid solar power systems are not able to function or generate electricity during a blackout due to safety reasons. Since blackouts usually occur when the electricity grid is damaged; If the solar inverter was still feeding electricity into a damaged grid it would risk the safety of the people repairing the fault/s in the network.
An off-grid solar power system is not connected to the electricity grid and therefore requires battery storage. Off-grid solar systems must be designed appropriately so that they will generate enough power and have enough battery capacity to meet the home’s requirements or the household’s load requirements
The high cost of batteries and off-grid inverters means off-grid systems are much more expensive than on-grid systems.
The battery bank. In an off-grid system there is no public electricity grid. Once solar power is used by the appliances in your property, any excess power will be sent to your battery bank. Once the battery is full it will stop receiving power from the solar system. When your solar system is not working (night time or cloudy days), your appliances will draw power from the batteries.
Ren Eleponio
CPAelectrician
SOLIS INVERTER
ONE SOLAR TOROIDAL INVERTER
ONE SOLAR
SRNE
AUTOMATIC TRANSFER SWITCH
SNAT INVERTER
Sa lahat ng napanood ko ito tlaga pinaka malinaw at detalyado
Haha same. Lalo na dun sa tabbing in between series.
Grabi ang linaw na paliwanag ,,,salahat nang nakita ko ito pina ka da best
Salamt po sir bali 60ah po lahat sa 40pcs,,grabi napa ka liwanag na explanition po♥️♥️♥️🙏🙏🙏🙏
Gnda ng content na ito boss klarong klaro kahit sa katulad kong newbie
Thank you, Sir
Thanks for uploading. Informative and detailed video..
Thank you SolaRenz:
Good and informative Video.
Could be better if the BMS connector is disconnected while making the individual connection of leads. This will be safer incase there is an error in the connection giving a chance to review connections for cross wirings, specially for first time DIYers..
God bless your fb page..
I encounter many diy tutorial videos but this one is very descriptive in his explanation 👍👍👍👍more power to this vlog.. thanks for sharing your knowledge..
Thanks, Sir!
Exact details very educated mabuhay ka bro.
This is another detailed and friendly tutorial ka-SOLAR! “Lithium Iron” pala. Wow, nice wallpaper ng phone. Good job.💖
Salamat lods may idea na.. malinaw at walang hidden secret wirings.😊😊😊😊
nakita ko sa fb, kaya eto, dito ako ngayun, maganda ang tutorial, easy to follow, pambili lang ang wala 😂😂😂
Laking tulong yan sa mga naguguluhan kapareho ko sir. Hehehe
Gud pm bro.grupo talaga kaung malilinis mgtrabaho.i meanang lilinis ng mga project nio.
Thank you po sa video, maraming maraming salamat po sa educate sa amin, more power po sa inyo!
Thank you. This was very helpful and provided insight into these lithium batteries 💕🇨🇦🙏. I read the English subtitles as I don't understand Tagalog.
New subscriber po. Salamat at may natutunan ako sa video nyo napakalinaw.
Ito ang pinakamagandang vlog na napanood ko step by step ung mga first timer na gustong gumawa Ng lifepo4 assembly ma encourage sa vlog na to good job bossing.
Salamat po sir detalyado talaga. Thank you..
thank you Sir.... ang klaro...very detailed....galing.....
ok na ok sir sana madami pa kaming matutunan sa mga video mo bagong subscriber mo sir.... god bless
ito hinahanap ko malinaw n paliwanag
🙌🙌🙌🙏 Salamat sir ng marami. Nalilinawan nako ng konte :) mabuhay kayo
Akala ko marami. Hehehe. Enjoy….
Salamat sa pag share ,si engr pamatian is owner nang cctv and solar shop dito sa aklan po. More power sa inyo and God bless.
Kalibo? Baka sakali mapasyalan ko pag nagawi ako sa Aklan.
Yes Kalibo po
Salamat sir for this informative video. God bless po
Welcome Sir Michael.
great tutorial. Ka-Solar.thumbs up.
Thank you, mamamags!!! Congrats sa one year mo sa YT!!!!
Salamat for sharing this sir. Ano type and guage ng sleeve wires na gamit mo please?
As always. Maraming Salamat sir
Good job sir. Well explained talaga. Inching up my learnings regarding solar diy setup.
Thank you sir for sharing.
Well explained
thanks sa info sir
Very informative video sir. Thank you sir for sharing. Good health and God bless you and your family.
Crystal clear demonstration and detailed tutorial on how to make and DIY battery bank.Amazing..I salute master. by the way may i ask the wire guage that u use on your balance cable? and also the size of that ring terminal on that balance cable? Thank u and more power to your channel..such a inspiring content master.
salamat sa video sir, paano pala connection ginawa at settings sa snadi at automatic sya mag transfer sa DU pag nag lowbat ang battery?
good job present sir
tnx a lot sa video sir more power
Sir, Ganda ng gawa mo, very well explained. Napansin ko lang po, hindi mo yata naTest ang bawat Voltahe ng baterya? Kasi dapat pare-pareho sila ng reading bago mo pagsamahin (Series or Parallel). Hindi po ba? Ask ko lang naman po.
Tested yan sir, parehas yan, top balanced ika nga.
@@solarenz Ah okay. Sana lang naCapture mo sa video mo para sa mga may tanong tulad ko. Salamat po...more more more upload please!!!!!
Sir, pwede po bang next video nyo ay tungkol sa BYPASS DIODE, CONNECTIONS, VALUE, TRABAHO AT IMPORTANCE NITO. salamat po.
Another useful and informative video content
Malakas nga capacity sir Kasi may idle consumption din yang inverter.
Another educational vlog again from you Sir R! Thank you! Keep going Sir!
baka pwede mag vlog po kau ng 32650 or 32700 na pwedeng powerbank or pwedeng gawin sa mga appliance's
Portable generator gamit ang 32700 ba ang gusto mong sabihin sir?
sir tanong lang po ano magiging protection ng bawat cell if na magkaroon ng( sample )mag init
kakulay din sir Renz ng damit ung Gloves and battery hehehe
Sir..if mag assmble po ako ng Lifepo4 60ah batt. kya poba ng (400w) solar panel?
Sir kahit may bms na po ba need pa din active balancer? Tapos dapat po ba umiilaw yung active balancer? Newbie question sir pasensiya na
Sir gudmrng po,bagong subscriber nyo,magtanong lng po ,pwedy po ba florecent ang gamitin at ilan oras sya bago mag lobat ang battery salamat po sir and GODbless po
Pwede po Sir ang Fluorescent na DC, pero kelangan nakalagay sa loadside ng SCC or kung direct man sa battery na yan, at least maglagay ka ng buck converter para ma-regulate sa 12v ang DC voltage.
Ser
Pwedi ang SCC PWM na gamitin sa life po4 batt. Salamat po
i check this video parang puede ang style ng assembly sa 32650 na project 12v,100ah may similarity po ba..
Sir ok lng po b n mataas ung capacity ng battery kesa s bms? Ung po s demo nyo ns 60ah yta ung battery pack tpos 30 amps po ung bms ok lng po b un? Thank you
GoodDay bossing, magkano po inabot ng ganyang battery build?
Sir ang arrangement ng cells ay 4x4x28 , for 48v 168ah na bitek 32700, nakita ko sir iyong setup ni Rudy Ocampo, isa yata kayo sir tumulong para mabou iyon. Papaano sir ang filling ng mga cells?
Ang SNAT sir pag low voltage kaya nya mag take over to charge the battery?
sir pareparehas lng ba cut mo na tabbing wire gnyan lang lhat yan!?
sir may link po kau san nabibili ung mga components, tnx ,,, 40 pieces Bitek 32700
1 pc 30amps BMS
1.4 Amps Active Balancer
Wire tabbing
Battery holders
Bolts and nuts
Paano sir na nag autocharge sa AC? Nka solar panel nman xa. Nasa set up ba ng inverter un? Anong inverter ba gamit mo sir?
Yes, i-set mo lang sa inverter na off-grid with ac charging
sir sa jrv solar ninyo nabili yung 32700 na battery? salamat po sa tutorial...👍
New subscriber po ,,,,ilang taon po ang lifespan sa ganitong battery thanks and GOD BLESS YOU SIR
> 10years
Sir renz bka po may link ka para po sa ginamit na parts po dito sa video maraming salamat po sa tutorial na eto dagdag kaalaman po☺️
Sir, hinde ko sa online nabili ang mga gamit, kaya walang link, diretso ka na lang kay Rajiv or Lion Decour.
Salamat po sir renz more video to come po😍
Sir Tanong kolang kong pure 12 volts Ang gamit na ilaw Dyan sa 60 amps Hindi na dumaan sa inverter kaya nya bang Ang buong gabing nakailaw?
Boss ano setup ng inverter nyo? parang UPS po ba.. napansin ko kasi me takip ung A/C Input nya bawal ba galawin un?
sir, recommended ba at safer ba na mag 32700 na kesa mag prismatic battery muna? bulky lang iyong 32700 for 10kW solar battery.
Well, regardless of type of cells, basta nilagyan mo ng complete safety devices, like BMS and Balancer, prismatic and Cylindrical cells are safe. Nasa iyo ang option kung mapiprismatic ka or cylindrical na 32700. Pagdating sa costing may pagkakaiba; sa prismatic you need bigger amount of costs to purchase, while in 32700, you can purchase build it up, by gradual population of cells, in a small quantity until ma-complete mo na ang 10kwh. As assembling and maintenance process, prismatic is favorable, while a cylindrical will require more time and exertion of efforts.
Sir renz gandang araw,ask ko lng po bout solis 1k inverter with 5x100w panel during peak hour naghaharvest lng cya ng 100-120w,wala na po bang dapat iadjust para maitaas ang harvest nya,maraming salamat po.
Try nyo pong linisan, kase baka nakaka-apekto sa efficiency, at alisin nyo rin kung may shading gaya ng mga dahon or kung anung mga pwede lng makaharang sa direct sunlight. Tingnan nyo rin ang clearance or distance ng panel sa roof, baka naman masyado na nakadikit, ang panel ay iinit at apektado ang efficiency. Check nyo na rin ang mga MC4 baka nmn maluwag at yung pv cable.
Sir, ilang Ah po ito, and also do this system can run1hp airconditioner, aircon lsng po ang load
Ung pang Bms at active balancer n png 32650 ay pwd Rin ba sa 32700 bitik battery
Tnx sir video marami natutunan. May buylink Sir kayo ng materials na ginamit
Wala sir sa cells. Direct sa seller yan. Yung mga accessories, lahat SHOPPEE.
@@solarenz tnx sir sa info, kay lion decor /rajiv saini mo ba? Na avail ang 32700
@@toots3020ph Rajiv Sir.
@@solarenz anong format sir ng cell? B1 or B3
Another useful video content , sir may tanong lang po mas advantge ba mag DIY ng raw cell , kesa sa bumili nlng ng plug n play
I agree, Sir. Kase pag ikaw gumawa, alam yung quality ng materials. Unlike sa plug and play, aasa ka sa warranty. Alam mo naman na siguro ibig ko sabihin, Sir.
@@solarenz hehehe hindi nmn sir totoo ang warranty,, pang akit lang ng mga negosyante iyan.
@@toots3020ph ayun, pwede nga rin marketing strategy, pero yung quality baka mag-last lang a day after the warranty concluded na rin.
@@solarenz Sabagay may katwiran ka jan Sir, pero kung 10 or 20 years warranty saan mo pa kaya hahanapin ang seller after 10 years
good pm po ok lang po ba yang active balancer nyo para sa 4s 10p? tanong lang po?
Ok
Sir Renz, anong wire size ginamit mo sa BMS at sa main pos at neg?
kung halimbawa magpa assemble po ako sayo ng ganyang battery pack....magkano ang halaga po....buong battery pack kasabay na ang bms po ...
Sir bakit hindi capacitor type ng balancer ginamit nyo? Iyong tabbing ba sir may specific current na kayang dalhin?
sir kpag nkabili ng bistek, need pb i capacity yan? or pde buunin n agad? thank you
Sir , kumpara sa presyo ng meralco per kwh, alin sir ang mas mababa battery kwh or grid kwh?
boss sa battery n buuin po kaya b ang ganyan n active balancer n maliit sa 12.8v60ah po? marame salamat po
Magkano po inabot sa set na boss?
Idol saan tayo mkabili nyan, yung kit lng para ako nlang ang gagawa....
Ser newbie lng po.san po kyo umorder.isang set n po b yan pag nag order.magkano po nagastos.
Sir paano mag 24v. 48v.
Pwede po b mag series connection at UN bms at active balancer palitan pb?
Different BMS and AB with 16S,
Terno blue sir mag buhat sa t-shirt, gloves at battery
Hello Sir!
Tanong lang po. Kaya po ba ng 50ah or 60ah na 12v lifepo4 battery bank with 500w psw inverter paganahin ang isang rice cooker?
Alanganin na Sir, masyadong malapit na ang watts ng rice cooker sa rated watts ng psw mo.
Sir another question po, regarding naman sa video. Ano po yung gauge number nung wire na ginamit niyo po (battery to terminal block)?
@@yokceRDeckoy #18
Sir Renz thanks po sa information
Pwede po ba 4 series, 18 parallel/layer. Igagaya ko po sana sa inyo gagawin ko, bale 12v 99Ah po ang battery systems pwede po ba yun?
72 pcs. Battery lifepo4 32700 or 32650
Pwedeng pwede yan, Sir.
Thanks sir
More power po😊
sir pag naglow voltage na ung inverter lilipat sya sa ac db?pg gnn machacharge sya from ac?or from solar ang charging?
Ac charging
Hello. Sir ask klng po san pwede mkbili ng battery n bitek? Thank you
sir, pwd po ba mag series dalawang set neto para makgpag produce ng 24v?.. bawat set ay my BMS at Balancer.
Pwede, pero mas recommended ko kung isang system na lang na 24V, at 24V din ang BMS, 8S.
@@solarenz thanks po
Ilan amperes sir ginamit nyo bms and balancer?
Salamat poh sa tutorial mo sir laking 2long sa akin to na bago sa solar,tanong lng sir ok lng bah ang 30amps na BMS sa 60ah na battery salamat poh
Ilang volts?
@@solarenz 12.8 volts sir salmat poh
@@PANTER0816 bitin ang bms mo, dapat 60amps din pataas
Sa ebike mo ba gagamitin?
Sa solar poh salamat poh sir sagot
Sir Renz newbie po ako...ano po na BMS gagamitin sa setup mo? 4s or 8s BMS?
Pag 12v sir 4S, pag 24V 8s
@@solarenz salamat po sir Renz..😁
Iyong mga nut and screw ba sir kasama na sa package pag bumili ka
Separate, Sir.
@@solarenz ah okey sir
Sir matanong ko lang saan kayo nag connect ng main positive galing sa battery? Di nyo kasi pinakita. Saka yung main negative ba ng battery ay yung black wire ng bms? Medyo naguguluhan ako.
Ang main positive ng BATTERY ay iko-connect sa positive side ng inverter at SCC. Yes, tama ka, black yun. Dahil ang blue color ay yun ang nakaconnect sa main negative ng battery.
So bali sir pag kukuha na ako ng main negative source ay sa black wire na ng bms?. Tama ba?
Tapos ang main positive ay yung sa ilalim ng battery yung sa tabing wire na pinaka baba? Psensya na po medyo di ko pa kasi ma gets. 😅
Sir ask ko lng pano mg sizesing ng BMS at balancer para sa battery na ibibuild ko.. 🤔
Sa size ng inverter ibinabase ang BMS, kung meron kang 12V na inverter na 1000watt, simply divide 1000w to nominal voltage na 12.8v= 78A ka, so hanap ka ng malapit na BMS rate na 100A,12V,4S. Wag mo ibabase sa Ah ng battery, mali yun.
@@solarenz eh sir about n man sa balancer pano mag sizezing..
@@makingdifference4498 walang sizing yang active balancer, kaya hinde ko na sinagot. Ang rule of thumb, the higher amps available the better.
@@solarenz last question sir. What if bubuo aq ng 200ah battery pack 24v inverter gamit ko 3000w. Ano recommend bms ang gagamitin..🤔
good day Sir pano po kung need ko 120ah na battery pwede po ba yung 4s 20p ang set up? s top balancing po Sir need po ba gamit charge na gamit ninyo or pwede na po sa solar charger? ask lang po baguhan lang po sa paggamit ng lifepo4. may set up po ako solar gel type po I want to upgrade my batttery into lifepo4 sana mapansin ninyo salamat po madami ako natutunan.
Sir wala po akong mahanap na 1.4amps active balancer balancer Sir? di po ba pwede 1.2amps active balancer or higher?
Magkano lahat magagastos Nyan boss?
Ahh ok na po.. nag error lang pala.. hehe..
San po makakabili ng Bitek Battery , Salamat po
Sir magkano po ang gastos sa ganyang battery.
Boss meron b sila sa shoppee
Boss ang config nyan ay 4s at 10p tama ba ako tnx po
Hi Sir pwde ko po ask kong ilang oras AC Charging bago mapuno itong setup. .Ty
3hours lang, Sir.
Pa regards kay lion decour sa bitek cell nya sir
May supply na kayo ng BITEK? Maraming naghahanap
boss, tanong lang yung isanglayer na 10pcs battery lumalabas na ilang Volts at AH yun?
3.2V nominal voltage, 6Ah