DIY GPU Core Swap - 1070 Ti - part 2: THE FIX
Вставка
- Опубліковано 28 чер 2024
- Turns out I swapped the core from one broken PBC to another broken PCB. No other option than to try and repair this now. But the faults is tricky to find, and there are few of them! Some luck required.
- Наука та технологія
To summarise the faults on this "good PCB":
- 5V regulator not working
- 12V leaking to 3.3V when 5V is enabled and running
- HDMI port needs replacing
- PEX buck replaced
- Shorted PWM signal in one of the fans
Damn, I thought the core was done for, but somehow it survived the whole ordeal.
@@mart43 same :) but the only way to really know was to fix the PCB.
gave it 10A@2.6V for science ⚡⚡
@@MrRoccale yes!