How To 3D Print Animatronic Eyes For Cosplay and Props
Вставка
- Опубліковано 12 жов 2024
- In this tutorial I will show you how to build my animatronic eyes and what you need to build it
Files:
www.thingivers...
Build Guide
drive.google.c...
Connecting the transmitter and reciver:
follow the tutorial video on the amazon page it might take some trial and error www.amazon.com...
Battery:
In the video I use an ECS and RC battery, this is big and bulky and i would get a battery that goes strait into a three pin
⚙️Parts, Amazon Affiliate
Transmitter And Receiver:
amzn.to/3HNqUXP
Cable Splitter:
amzn.to/3B0OWun
Medium Size Batteries Like The One I Use(not the same)
amzn.to/42duv9x
Servos (Micro Center)
www.microcente...
Battery To 3 Pin ( ESC replacment and RC battery replacment)
a.co/d/i5jtxge
3D Printer
amzn.to/3M1YBr2
Note: I dont know if you need the ESC its just what I happend to have.
Got Any Cosplay Questions I Could Make A Video About?
Here’s my question! Are you gonna make your eyes LIGHT UP?
Can you make it move on its own? Like code it to do certain movements
This is AWESOME I actually always wondered how famous cosplayers make their characters eyes move 😅 Now I know I’m definitely gonna use this in the future for sure ❤ And as always keep up the amazing work your so talented 👍
This is so awesome thanks don’t stop making content!
Thank you for your instructions, this helps me a lot.
Bro, this is so underrated! I will definitely be using this tutorial when making my Freddy fazbear Cosplay.
This is awesome thank you for the tip I will defiantly use this.
This is great. If you want some advice, next time use superglue or 3d gloop to make the bonds stronger and cleaner.
great video!!!
you should hollow out a full monty 3d model to make a full suit
Wow, just WOW! Did you parents help you with this or was this by yourself, because you're an awesome kid!
I Designed it my self, Thank You
Question is this wireless? Also if you don’t already could you make a video of how to make the micro servo motors wireless?
dude..THIS KID GOT A +1000 OF IQ
I am also making a fnaf cosplay and I have all the parts and how do you connect the transmitter and receiver to the whole thing? I making a head to toe fnaf cosplay if you know thanks!
the tutorial on the amazon page might help www.amazon.com/DS-600-Transmitter-Receiver-Controller-Channel/dp/B09Y8XT53X?_encoding=UTF8&pd_rd_w=ht048&content-id=amzn1.sym.bc5f3394-3b4c-4031-8ac0-18107ac75816&pf_rd_p=bc5f3394-3b4c-4031-8ac0-18107ac75816&pf_rd_r=N9Q2EEXVEE1QTR20FJGZ&pd_rd_wg=ywy3j&pd_rd_r=cbbaf203-23f8-4486-976b-b0590c5ba2be&th=1&linkCode=sl1&tag=aquacat-20&linkId=91ba0cc2b12a7c6e576c5ed87f1adaa2&language=en_US&ref_=as_li_ss_tl
I know Im late but what supports you used on you Plushtrap or other projects? I know it's tree supports but my settings are off. Can you give me some tips? Great video and Monty print.
I think I just used regular tree supports in the creality slicer and then used a brim.
@@AquaCatzok, thanks a lot. I can’t get anything to work.
@@icybear151 this might help ua-cam.com/video/THS6pEjsBtg/v-deo.html
last question can u make a full tutorial?
How do you hide all the parts in the cosplay
hi just 2 questions do u want to do a project with me and how old are you?
I have one last question where did you get all the parts from
I printed parts with my printer and also went to Microcenter to get electronics, I put the link to the parts on amazon in the description if you want to get it from there.
@@AquaCatz thx
How did you get the servos to work with the transmitter and reciever? I got the same one and plugged everything together. So far the receiver is powering on but servos aren't moving. Tried to figure out how to work the controller but instructions are unclear. Also plugged into different channels and nothing. If you can help that would be appreciated, thank you. Great video btw
did you plug the battery into the receiver
look at 1:04 -1:06 at 0.5 speed they show the a battery I think the power goes into the last three pin of the receiver
if its a problem with the communication between the transmitter and receiver the tutorial on the amazon link might help
www.amazon.com/DS-600-Transmitter-Receiver-Controller-Channel/dp/B09Y8XT53X?_encoding=UTF8&pd_rd_w=ht048&content-id=amzn1.sym.bc5f3394-3b4c-4031-8ac0-18107ac75816&pf_rd_p=bc5f3394-3b4c-4031-8ac0-18107ac75816&pf_rd_r=N9Q2EEXVEE1QTR20FJGZ&pd_rd_wg=ywy3j&pd_rd_r=cbbaf203-23f8-4486-976b-b0590c5ba2be&th=1&linkCode=sl1&tag=aquacat-20&linkId=91ba0cc2b12a7c6e576c5ed87f1adaa2&language=en_US&ref_=as_li_ss_tl
@AquaCatz yes I plugged the battery into an esc cable that is going into the receiver. I am getting a green light that flashes when I plug it in, then stays solid green when I turn on the controller, but servos are not moving/responding
@@NESTYGIGGITY maybe the servos where plugged in the wrong way round like the red wire stays in the middle and the brown and yellow wire are on either side try flipping them around
@AquaCatz just tried flipping them, and nothing. Were you able to just start moving the servos after plugging them in or do you have to calibrate it?
What 3d Printer do you have
i have an ender 3 max neo
hey its been a month sense you last upload any video what happend
i had school finals and i went on vacation for a week but im editing two videos right now so hopefully they come out soon
@@AquaCatz ok nice im making my self a springtrap cosplay
hi i dont see the eyelid in the files
should be fixed now
@@AquaCatz thx