TRANSMISSION SERVICE- FLUID, FILTER & GASKET | 2011 NISSAN ROGUE | Howto/Diy

Поділитися
Вставка

КОМЕНТАРІ • 70

  • @ThePullUpKing
    @ThePullUpKing  4 місяці тому +2

    Whoever says i didnt show the type of fluid i used... yall clearly not watching the video. 0:39 in the video, I show it. And tell you to make sure you get the right type. Do diligence ppl.

    • @MrCeora
      @MrCeora 2 місяці тому

      Did it take exactly 5 quarts, or did you need to add more?

    • @ThePullUpKing
      @ThePullUpKing  2 місяці тому +1

      ​@@MrCeoraI mentioned a 5qt fill. Always check the fluid level if the system isn't sealed. You can't get the level wrong when you check it.

    • @MrCeora
      @MrCeora 2 місяці тому +2

      My daughter had her transmission replaced at 130k and the paperwork said 6 quarts. I'm hoping he didn't overfill , IDK.
      I hope he wasn't just trying to make an extra $30 charging and pocketing that extra quart.
      Thanks for the reply.

    • @ThePullUpKing
      @ThePullUpKing  2 місяці тому

      @MrCeora You can check it yourself to be sure it's not overfilled. Just make sure the engine is running when you do. And on a flat surface. You're welcome and thanks for watching.

  • @donaldpoole1584
    @donaldpoole1584 Рік тому +2

    Thank you!
    Ive heard many people recommend to change the Trans Fluid in this car every 30k-50k miles.
    How often does Trans Filter / Gasket need to be replaced?

    • @ThePullUpKing
      @ThePullUpKing  Рік тому +1

      No problem. Yes. Every 30,000-60,000 miles.

  • @Lashante727
    @Lashante727 Рік тому +3

    Thankyou so much!! I needed help doing this but didn't know where it was lol!

    • @ThePullUpKing
      @ThePullUpKing  Рік тому +2

      Nice!😎 Thank you and I appreciate you watching!

  • @davidshek606
    @davidshek606 9 місяців тому +1

    Thanks for the video, sir. Did you use RTV or a gasket maker to secure the gasket to the pan?

    • @ThePullUpKing
      @ThePullUpKing  9 місяців тому +1

      No problem. I explained that in the video.

  • @roberts1159
    @roberts1159 Рік тому +3

    Straightforward video. This car also has an external cartridge filter. Do you ever change that also ?

  • @Pingaheimer
    @Pingaheimer 4 місяці тому +1

    When it's hot, the dipstick should read around the middle to upper section of the crosshatch section?

    • @ThePullUpKing
      @ThePullUpKing  4 місяці тому +1

      Just like reading the oil dipstick

  • @sierradalton7823
    @sierradalton7823 Місяць тому +1

    Is this the same for a 2008 Nissan rogue? For the longest time I couldn’t find my dipstick

  • @nowayout73
    @nowayout73 2 місяці тому +2

    What about the cooler filter?

  • @ebonick22
    @ebonick22 12 днів тому +1

    What about the filter behind the cooler?

    • @ThePullUpKing
      @ThePullUpKing  12 днів тому +1

      @@ebonick22 Replace it if you want to

  • @jasmyneashley5186
    @jasmyneashley5186 Рік тому +1

    I have a Nissan rogue 2008 do I have to flush it on or it’s the same as your

    • @ThePullUpKing
      @ThePullUpKing  Рік тому +2

      Don't flush it. Just drain, fill and replace filter.

  • @mavatj
    @mavatj Рік тому +1

    Great video

  • @shellybelle6781
    @shellybelle6781 10 місяців тому +1

    Where is the cooler oil filter located ?

  • @mariovalladares9055
    @mariovalladares9055 11 місяців тому +1

    And if you replace filter can that make the rpm not go higher

    • @ThePullUpKing
      @ThePullUpKing  11 місяців тому

      Not at all

    • @mariovalladares9055
      @mariovalladares9055 11 місяців тому +1

      @@ThePullUpKing trans when acceleration the rpm goes fast and then goes down funny

    • @ThePullUpKing
      @ThePullUpKing  11 місяців тому

      @mariovalladares9055 Cvt transmissions are known to go bad. I would start by scanning for any trouble codes.

    • @mariovalladares9055
      @mariovalladares9055 11 місяців тому

      @@ThePullUpKing no codes

    • @ThePullUpKing
      @ThePullUpKing  11 місяців тому +1

      @@mariovalladares9055 You won't find transmission codes with a regular obd scanner.

  • @davidshek606
    @davidshek606 Рік тому +2

    But you didn't change the filter, you just changed the screen.

  • @williamandrus4704
    @williamandrus4704 Місяць тому +1

    What was the torque specs?

  • @walterjackson7757
    @walterjackson7757 7 місяців тому +1

    What kind of fluid do I use to replace?

  • @factzmediaglobal
    @factzmediaglobal 11 місяців тому +1

    IF POSSIBLE YOU CAN REUSE THE FACTORY GASKET IT WORKS VERY GOOD ... I THREW THE DURALAST GASKET AWAY . IJS TIP

  • @Kneedeepinstock
    @Kneedeepinstock Рік тому +2

    Did it fix the Torque Converter Code?

  • @fredaydaybae8450
    @fredaydaybae8450 2 місяці тому +1

    Thank you!

    • @ThePullUpKing
      @ThePullUpKing  2 місяці тому +1

      @@fredaydaybae8450 No problem. Thanks for watching!

    • @fredaydaybae8450
      @fredaydaybae8450 2 місяці тому +1

      @@ThePullUpKing I'm just realizing you're the one that helped me with the control arms and CV axles on my Volvo S80!!!! Aye, I got all these cars and you KEEP helping. I'm putting yo isht in NOTIFY and BELL ringing notifications lmao. You do work like I do man. You awesome bruh haha. Lemme go thru your channel cause I got a bunch of cars and it brings me here EVERY TIME haha.

    • @ThePullUpKing
      @ThePullUpKing  2 місяці тому

      @fredaydaybae8450 That's dope man!💯😎 I appreciate it fr. I got alot of content.

  • @ThePullUpKing
    @ThePullUpKing  2 місяці тому +1

    Gotta love these smart ass comments.🤡🤣

  • @Billy-wk3vv
    @Billy-wk3vv Рік тому +1

    thanks

  • @RespectMusicTV
    @RespectMusicTV Рік тому +1

    🔥🔥

  • @mccg4337
    @mccg4337 10 місяців тому

    basically its a screen to catch metal particles.. its not actually a filter to like clean the oil.

    • @ThePullUpKing
      @ThePullUpKing  10 місяців тому +2

      That's what all filters do, catch debri.

    • @dealerauctionnightmare4689
      @dealerauctionnightmare4689 4 місяці тому +1

      yeah, the cartridge filter needs changing more than that screen filter.

    • @ThePullUpKing
      @ThePullUpKing  2 місяці тому +2

      ​@@dealerauctionnightmare4689Lies. The main filter is what's more important. If it wasn't the Dealership would have mentioned it when I purchased everything. My clients var is working just fine now. Torque converter code gone. I did my job. If you so worried about the other filter, REPLACE IT. My work A1. No need to make it seem like I don't know what I'm doing.😆 But thanks for watching anyway man.

    • @dealerauctionnightmare4689
      @dealerauctionnightmare4689 2 місяці тому +1

      @@ThePullUpKing keep believing that...🤣🤣🤣🤣

    • @ThePullUpKing
      @ThePullUpKing  2 місяці тому +1

      @@dealerauctionnightmare4689 Like a said, my client satisfied.🤡🤣

  • @ahamilton3521
    @ahamilton3521 6 місяців тому

    What about the second filter bub? Just fuck that one?😂

    • @ThePullUpKing
      @ThePullUpKing  6 місяців тому +1

      Yup and got the job done bub. Thanks for watching anyway

  • @sergiocabrera9126
    @sergiocabrera9126 4 місяці тому

    Bad work, not change the paper oil filter the back transmision, and not tell the fluid use it