How to fix / repair VW Golf Mk4, Jetta, Bora, Skoda, Seat, Audi Sloppy Gear Stick, Gear Linkage Rods
Вставка
- Опубліковано 15 лип 2024
- If your VW Golf Mk4, Mk5, Mk6, Jetta, Bora, Polo, Passat B5., B5.5, B6, B7, Caddy, Sokda Octavia 1, Octavia 2, Fabia, Superb, Audi A2, A3, A4, Seat Leon 1M, Ibiza, Toledo, Cordoba, etc. shifter is sloppy or you having great difficulty aligning the stick when changing gears, probably you'll need to check the shifter bushing or the complete gear shift mechanism that is mounted on top of the manual gear box (or transmission shaft selector cable).
HERE you can find New Gear Selector Shift Lever Linkage Rods for VW GOLF MK4 BORA AUDI A3 SEAT Toledo Skoda Octavia 1J0711803C: ---- amzn.to/3A5Bz9i
HERE you can find New Selector Gear Lever for VW SKODA SEAT AUDI Bora Golf Mk4 Combi 1J0711183D: ---- amzn.to/3txqrEO
HERE you can find Gearbox Gear Shift Shaft Circuit Selector Linkage Rod Bearing Lever Ball 1J0711076G 096B for VW Golf Mk4 Bora A3: ---- bit.ly/3rNJr1l
Selector Shaft Gear Shift Cable Connector End Catch for VW Passat Jetta Eos CC GTI Golf, for Audi R8 A3 TT R8 Seat Skoda, 1J0711761B, 5N0711761: ---- amzn.to/3A7poZB
HERE you can find New Gear Selector Shift Lever Linkage Rods on Aliexpress: ---- bit.ly/3Fjlj8P
Read the FULL ARTICLLE HERE ---- bit.ly/3uCY9VT
See More Products for VW Golf 4, Mk4, Bora, Jetta HERE:
- Actuator Door Lock Module from HERE: amzn.to/3cjNi95
- Window Panel Switch for VW Golf Mk4 (2-door model): amzn.to/3buq1kM
- 5 Speed Manual Gear Shifter Knob for VW MK4 GOLF/Jetta/Bora: amzn.to/2XPq2f1
- Cool White Interior LED Kit + Installation for Volkswagen Golf Mk4: amzn.to/2XOeZmg
- Sequential LED Side Indicator for VW Golf MK4/Jetta/Bora: amzn.to/2RUzBp7
- Front Headlight Eyelids for VW Golf 4 Golf4 MK4 1997-2003: amzn.to/2Y9Zk0r
If you enjoyed this video tutorial, make sure to give it a thumbs up and share it with your friends. Also, don't forget to LIKE and SUBSCRIBE!
More VIDEO TUTORIALS on www.servicetutorials.com
Follow us on INSTAGRAM: service_tut...
This video is only for informative purposes! We do not take any responsibility and we are not liable for any damage as a result of the information contained in this video. Use this information at your own risk. Thank you!
If you have any suggestions about new tutorials, let us know in the comments section! - Авто та транспорт
Some tips for anyone attempting this, if you need to replace the gear levers/links and they have those rubber bushings on the end boil some water pour it in a cup and then dip the rubber into the cup for like 30-60 seconds then it will pop on with relative ease it softens the rubber and once its on it hardens up and won't slip off.
Thank you for the tip!👍
Thank you bro👍🏽
As iron sharpens iron so does one to another.
Thanks a lot mate - My gear linkage slipped off, only gears 3rd and 4th were available mk 4 golf - this walk through helped me spot the flailing rod, saved me in a real tight spot the night before I was about to travel ~8hrs 😅 thanks!
Thank you too for the feedback! Glad to help!
Thank you very much my friend...you helped me you can imagine....
Thank you for your feedback, Max! 👍
Thank you very much! it really helps
Thank you too for your feedback!
Please put tuto about how to dissmantle and install shifting mechanism on mk4
This is best tutoriol video i have everseen in my life. Thank you for sharing
Thank you for your kind words! 👍
Great video!! Quick question though - how do you align gear lever after having changed all the bushings in the MK4 2001 model?
You should have show how the linkage mechanism is removed from the car. I had several failures and I managed to work it out after spending ages taking pictures and sharing on forums. You have to pop out the linkage from the brackets and then unbolt the brackets from the gearbox/subframe. The ball shapped bush on mine is completely shot part on my 1J0711076G 096B, I can't see it sold anywhere online.
I will speak to TPS when they open see if they have it. Chances are they will want £50 or more for the bracket.
Not sure if I should just wait and order from china,
The other rubber slider mehanism doesn't seem to be sold online - I may need to extract it and make my own with some plastic. Glue on extra material from the plastic slider in the hopes that it works fine,.
Thank you for your feedback, Simon!
@@Servicetutorials I created rthe plastic slider with a series of zip ties. Checked after 2 months and it's still in place.
can u plz show us how u removed the whole gear system?
Thank you
Thank you too for the feedback!
is this gear selector linkage and linkage rods the same as a mk4 gt tdi?
Can I install a gear box 6 gear of golf mk5 1.6 , on golf mk4 1.6 (golf 4 1.6 are 5 gears ) thx a lot
Thank you for this video ! could you help me how I can remove this parts to check if they are ok or not ? I have Golf Mk4 2003 1.6 16S
Thank you too for watching! It's a lot of work, you have to lift the car up to have access under the car. Start with checking the parts that are on the upper side of the gear box.
Where can we get the linkages?
Where can i buy this parts?
My problem is with the actual gear lever. It drops down even though I have not engaged reverse gear. How can I stop this from happening.
Hi! Probably you’ll need to remove the part from the bottom of the lever to see if one of those cables are disconnected from the stick.
How to adjust the mechanism?
Do you know if that shift mechanism which are on the shifter lever over the gearbox is not lubricated or greased? I've listened a harsh or raspy changes in all 5 rels when the car is hot after power on. When it's cold or has recently starting it's silence when I shift. I don't know why?
Yes, they have grease on it.
I have the same problem and grease didn’t help , did you manage to sort yours out?
Can someone please help me. I can't find a fix for my help. When I shift into first the shift knob moves to the right like if its in third once I let it go. what can I do to make it not look like it's in third when I'm in first gear is it a bushing issue and if so which one.
You have to check all the parts that is showing in the video and replace the one with the problem. Start with those from the top of the gearbox, you can reach more easily there.
@@Servicetutorials ok thankyou!
Thank you, I cannot install the Long rods, it is difficult to push in. Any tips?
Put iit in boiling water. It will expand
Please make disassmebly video for this.
Thank you for your suggest! We’ll do when we have the chance. 👍
@@Servicetutorials or just explain in text that they're push fit parts, you just get a screwdriver in and press up against another metal part to lever it off. Figured it out.
@@Professional_UA-cam_Commenter jesus it needs some force, i cant get it to pop on
Thank you for your valuable sharing video. I have same problem for my car vw golf 4 2001 model manuel. The part of mechanism has 1 rod, instead of 2 rod that vw 2005 model. Thşs video contains vw golf5 code and show us the code number clearly. But ı dont know golf4 code number for this part of mechanism. So ı can not share number to 5:01 service to look for the mechanism. Please could you share golf4 gear mechanism code number? Thx for attention. (Code number=serial number)
hi, you pointed toward my now exact same problem.
i need to replace the shifting rod bushing (the rod you hold in your hand)
how do you take out the whole assembly so i can change the bushing?
I have the same problem with my polo car and shifting from 4th to 5 th gear is a struggle is it possible I can take the car to a car service centre to have my gear shift parts to be replaced ?
Yes, you can do that.
The part which you are holding at 1:37...
What is the name of the part and could you share the part number?
Its the part that prevents you from engaging reverse when engaging 1; the black plastic part that hooks onto the metal part to keep the car in reverse.
Please, need name and/or part number asap. Part number should be on the plastic part itself
Hi! Are you looking for this part: www.ebay.co.uk/itm/123480468385
Do you know the rubber material that 1J0711076G 096B slides into?
you can recreate this with zip ties, tie loads of zip ties, make it nice and tight so the zip ties dont overlap each other. then use a final zip tie to tie all the zip ties together to prvent them from sliding off.
The alternative is to buy a pattern part (whole part) from autodoc and replace it.
Not 100 procent informative unfortunately, nothing how to remove it very bad. Could be awesome but it would be helpful if the Vlogger informe all thing step by step
Very bad quality skoda manufactrer alot of issues just finish engine issues start in gear issues
is this gear selector linkage and linkage rods the same as a mk4 gt tdi?
Hi, Jose! It is similar with a the one from the vw golf Mk5, presented in the video starting from the minute 5:00.