How to Replace Fuel Pump Assembly 2007-2013 Acura MDX

Поділитися
Вставка
  • Опубліковано 28 жов 2024

КОМЕНТАРІ • 10

  • @TRQ
    @TRQ  Рік тому

    √ Watch the Video
    √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
    √ Do it Yourself
    √ Save Money

  • @mikeloyson4979
    @mikeloyson4979 Рік тому +12

    Do you have to pull the fuel pump relay? Couldn't you just remove the electrical connection to the pump then start the car to remove pressure in the line?

  • @chrisdenicola4336
    @chrisdenicola4336 2 місяці тому

    Hey I’ve got an issue without any engine codes besides a random multiple misfire. I’ve replaced plugs and coils already. There is a strong odor of gas from the driver side of the car. Yet no leaking gas on the ground. When I start the car it idles normal and after about20-30 seconds it starts the misfire. Could this be the fuel pump or something fuel related?

  • @shawnsmith6250
    @shawnsmith6250 29 днів тому

    same procedure for 2011 and newer gens ACURA TL. all the same setup basically. Im putting mine in today as we speak. i wouldnt recommend draining the old fuel pump gas back into tank. deposits and residual sediment can be at bottom of pump. id just remove the whole thing with its filter etc.

  • @Dieselpwr
    @Dieselpwr Рік тому +2

    Easy breezy Lemmon sneezy

  • @ArlenFletcher
    @ArlenFletcher 5 місяців тому

    Seems like replacing the fuel pump relay while you have it out would be a prudent step.

  • @csbedford22
    @csbedford22 7 місяців тому

    If my car battery is completely dead, how do I release the gas pressure? Even with a jump there’s no fuel getting to the engine because the pump went out and it won’t turn all the way over. It’ll start but won’t turn over.

  • @123mannymanny
    @123mannymanny Рік тому +1

    will this work for a 2014? thanks

  • @musicfashionstyle9269
    @musicfashionstyle9269 Рік тому +1

    Why you put the black gasket down.

  • @checopacheco420
    @checopacheco420 5 місяців тому

    Super 🎉