THANK YOU !! I just replaced my old blower and probably saved $$$ and time, taking it to the dealership ! I followed your instructions, used the philips and slotted screwdrivers - including the shorty slotted one, for the rear, 3rd screw. I took my time, kept track of the screws coming out & going back in, and it took me 30 or 40 minutes total. My 2014 CR-V is once again much cooler ! (It's Florida, after all.) Thanks Again !
Dude you are amazing thanks you so much really for all this information I been trying to look for this problem for months until I found this video I’ll be doing the work next week let’s see if it work you are amazing new subscriber
That's a great video thank you. I'm really curious if the evaporator is accessible easily once the blower motor and fan is removed. The issue I'm having is (after a lot of diagnostics) is with a leak in the evaporator and I'm not sure if in this model year or a GEN 4 CRV... if the evaporator is right there and accessible? If so this video is really making that job more realistic for me than removing the entire dash
Hi, my 2015 CR-V makes an irritating whistling noise only when the heater is on. As soon as I shut it off, the noise stops. The heat coming out is fine. Do you know what the noise could be from and how to fix it? Thank you for your time!
I have the same problem, it's your CVT actuator. but don't worry, it can be replaced or you can just leave it as it is, this video will explain it to you: ua-cam.com/video/gwJ5BBHb9W4/v-deo.html
Any idea why my crv sometimes blows air and at times it doesn't work at all. I can turn it on and nothing happens. However there's some days where it just starts working.
Hey z speed I have a question I have a 350z and I’m doing a manual swap I’m installing the MT brake pedal and now my brake lights are not showing up when I’m slowly breaking and that’s not to safe when people don’t think I’m braking what could be the issue?
Did you swap the two brake pedal sensors from the automatic brake pedal to the manual brake pedal, if not try that! If you did swap them, you my need to adjust the brake pedal sensor to make sure it's fully depressed when braking. You can make slight adjustments to the sensors on the pedal by turning them counterclockwise, then depress the sensor in further, then turn clockwise again! Hope this helps!🏁💯
You just saved me 240 dollars at my local garage! Thanks a lot for the easy to follow video!
THANK YOU !! I just replaced my old blower and probably saved $$$ and time, taking it to the dealership ! I followed your instructions, used the philips and slotted screwdrivers - including the shorty slotted one, for the rear, 3rd screw. I took my time, kept track of the screws coming out & going back in, and it took me 30 or 40 minutes total. My 2014 CR-V is once again much cooler ! (It's Florida, after all.) Thanks Again !
Awesome!👍🏁
Great How-To video. Clear and not fast-paced like others that you have to keep going back for solid comprehension.
Thanks so much for watching!!🏁👍
THANK YOU SO MUCH!!!!!, MY AC IS BLOWING BETTER THAN IT DID WHEN I BOUGHT IT 🤣,thank you
Great video! I replaced my fan today and this video made the process very easy!
Thank you for this video. Just fixed mines based off your instructions!!!! Thank you
Dude you are amazing thanks you so much really for all this information I been trying to look for this problem for months until I found this video I’ll be doing the work next week let’s see if it work you are amazing new subscriber
As soon as you said it makes a clicking sound I knew it was the same issue great job man
Thanks so much for watching!!👍🏁
Thank you for the trick of puling a bit on that metal bracket of the door, otherwise it was inmposible to remove the fan.
Thanks so much for watching!!👍🏁
Congratulations on over 5k subscribers! Liked and watched full video
Thanks, I finally made it!!!
Great video.. you have the same issue with your compass as i have on my CRV :)
What a legend! Thanks m8!
very well presented.
more z content!!!!😊
Appreciate ya bro!
Thanks so much for watching!!!
That's a great video thank you. I'm really curious if the evaporator is accessible easily once the blower motor and fan is removed. The issue I'm having is (after a lot of diagnostics) is with a leak in the evaporator and I'm not sure if in this model year or a GEN 4 CRV... if the evaporator is right there and accessible? If so this video is really making that job more realistic for me than removing the entire dash
Sorry, I'm not sure if the evaporator was located around the fan aera.
thanks
It was actually those 3 screws uou said that it wasn’t. No need to take the glove box out. Those 3 Phillips or 8mm bolts is all that’s holding it in
Great video as I may be doing this in the near future. Did you replace the fan motor with an OEM part or one from an auto parts store?
When removing the blower motor how easy was it to see the evaporator?
Hi, my 2015 CR-V makes an irritating whistling noise only when the heater is on. As soon as I shut it off, the noise stops. The heat coming out is fine. Do you know what the noise could be from and how to fix it? Thank you for your time!
Does it whistle when the air conditioner is on?
Great video. Thanks. Can you also use a socket wrench (some say 8mm) to remove those screws? Thanks.
Yes, it is a little easier!!👍🏁
Question, my Crv 2013 sometimes makes a noise during a cold start. happened to my 2003 as well what part is making that noise?
I have the same problem, it's your CVT actuator. but don't worry, it can be replaced or you can just leave it as it is, this video will explain it to you: ua-cam.com/video/gwJ5BBHb9W4/v-deo.html
Any idea why my crv sometimes blows air and at times it doesn't work at all. I can turn it on and nothing happens. However there's some days where it just starts working.
That's exactly what my fan was doing, time to replace your fan! And no, it shouldn't be failing so soon, this is a problem from the factory, Glitch!
Same exact thing is happening now
What other upgrades have you done? Mine has always had dim headlights. Any upgrades for that?
Yes, Lasfit has some awesome LED bulbs that are some of the best out there!!!
I bought a brand new one from Autozone thinking my old one was bad and the air output is still very weak. Can’t cool down the car at all
Air comes out cold but the air output is not good at all
Did you check for any blown fuses?
You might check the air filter it right above the blower, behind glove box.
Hey z speed I have a question I have a 350z and I’m doing a manual swap I’m installing the MT brake pedal and now my brake lights are not showing up when I’m slowly breaking and that’s not to safe when people don’t think I’m braking what could be the issue?
Did you swap the two brake pedal sensors from the automatic brake pedal to the manual brake pedal, if not try that! If you did swap them, you my need to adjust the brake pedal sensor to make sure it's fully depressed when braking. You can make slight adjustments to the sensors on the pedal by turning them counterclockwise, then depress the sensor in further, then turn clockwise again! Hope this helps!🏁💯
Did you see anywhere on this motor that a drop of oil can be added?
Things That need to be greased?
@@Zspeed on the blower motor. Yes
These motors are electric, it's best to replace a motor like this!
@@Zspeed ok. Thank you
Not hating , but it sounded noisy when you turned it on.
Anyone know if its same location for 2020 crv???
It should be in the same vicinity!!
But mine is a 08