I cured my suppressor with SLIP 2000 prior to even putting rounds through it. It gave me a level of protection and made the can MUCH easier to clean. I heated everything in the oven up to 300 then I poured the SLIP 2000 over the components fully submerging them in a aluminum tray. I waited until they were room temperature and then removed them, placing them in my sonic cleaner. Function is perfect and very easy to clean.. it takes the porosity out of the metal where all the carbon hides
LMAO he makes it look so easy. I have a gm-22 and gm-45 its not that easy. G-core is super hard to clean. Scrub till that plastic brush is worn down and you would have removed a small amount of carbon. If i had to do it all over again I would have bought a silencerco sparrow . Stainless steel throw it in the ultrasonic and done.
I still cant get my suppressor apart even after using a drive. I'm scared to use anything more than hand strength. Should I just go to ultrasonic cleaner?
I Use Oven Cleaner It Works Better Faster ..Members Mark Oven Cleaner Eco-lad Product On Ebay Its Cheap and Does Great Job Hardly any Brushing Used Mineral Spirits Acetone It Doesn't Do Crap Oven cleaner couple hours.. Soaking Done... Mines Titanium 22 caliber Tactical Solutions Axiom..Carry On
Use suppressor for 1000 -2000 rounds and then put it in a sealed bag and take it to a hazardous waste company and pay for proper disposal. But, hey! I paid $600 for my suppressor! I can’t dispose of it properly and buy a new $600 suppressor!! Yeh, well, they should cost $50 + $40 disposal fee.
0:00 Introduction
0:11 obligatory safety warning
0:24 rimfire suppressor
5:29 centerfire pistol suppressor
13:21 centerfire rifle suppressors
you're welcome
Doin' God's work son.
Whenever I need instructions on cleaning different firearms or components, I always look for this channel.
I cured my suppressor with SLIP 2000 prior to even putting rounds through it. It gave me a level of protection and made the can MUCH easier to clean. I heated everything in the oven up to 300 then I poured the SLIP 2000 over the components fully submerging them in a aluminum tray. I waited until they were room temperature and then removed them, placing them in my sonic cleaner. Function is perfect and very easy to clean.. it takes the porosity out of the metal where all the carbon hides
at 11:43 he said petroleum jelly is water based, he must have been thinking of KY jelly.
Kentucky jelly. .
Why is it called KY jelly?
Shouldn't it be KYJam? That seems to be more about what it's for. Lol
Great stuff! I can't believe I actually learned something from the inter-webs! Good job!
Look up the silencer dip method or use an ultrasonic cleaner, it will come out alot better this
11:42
Petroleum jelly is petroleum based not water based. What a doe doe.
How do you clean/remove lead/ from a suppressor that is permanently mounted to a 22lr?
I've always wondered if suppressors get gunked up like this. Excellent video thank you!
Excellent
Hi, how to clean a supressor with rubber wipes like the Wolwerine PBS-1 please ?
LMAO he makes it look so easy. I have a gm-22 and gm-45 its not that easy. G-core is super hard to clean. Scrub till that plastic brush is worn down and you would have removed a small amount of carbon. If i had to do it all over again I would have bought a silencerco sparrow . Stainless steel throw it in the ultrasonic and done.
Sparrow is also tough to clean, get a Dead Air Mask HD it is the best rimfire suppressor to date.
I still cant get my suppressor apart even after using a drive. I'm scared to use anything more than hand strength. Should I just go to ultrasonic cleaner?
As far as I understand, you don't want to put aluminum parts into an ultrasonic bath, if it's stainless steel it should be ok.
Talk to the manufacturer
Great Video
I Use Oven Cleaner It Works Better Faster ..Members Mark Oven Cleaner Eco-lad Product On Ebay Its Cheap and Does Great Job Hardly any Brushing Used Mineral Spirits Acetone It Doesn't Do Crap Oven cleaner couple hours.. Soaking Done... Mines Titanium 22 caliber Tactical Solutions Axiom..Carry On
Now do the same for integrated suppressors.
Nice
2:05 I'm not mature enough obviously
petroleum jelly is not water based
"CLP?" Lol. Jk. Thankyou for the instructional. :)
Use suppressor for 1000 -2000 rounds and then put it in a sealed bag and take it to a hazardous waste company and pay for proper disposal. But, hey! I paid $600 for my suppressor! I can’t dispose of it properly and buy a new $600 suppressor!! Yeh, well, they should cost $50 + $40 disposal fee.
they are actually silencers. check with the government and the patent office.
first?