Can confirm that this works! My L2 button was struggling big time. I didn't do the bow tie but I did do a tinfoil circle for the L2 section and I'm so grateful that it works. God Bless You Jay Edry!
You are a life saver. This stick works perfectly and I just spent almost $200 buying 3 new controllers. I didn't want to trash it because it's in great condition. Thanks for the help
I’m ashamed to admit I just smashed my controller playing elden ring and my L1/L2 weren’t working. I fixed it in a couple of mins just watching your video. You are a savior 🙏🏼 thanks
Thank you for this. My OG black controller had dead R2/L2 triggers. I was hesitant to buy new parts since I opened it up everything looked fine. I was also thinking of buying a new controller but I’m short on cash, with this video you just saved me like $80 for a new one.
I have been having problems with my L2 button. I tried everything, even changed the whole ribbon circuit board flex and it still didn't work. Had given up on the controller until I saw your video today. And it worked. Thank you
Thanks a lot for this video. For my controllerI had to double up my foil. The single piece only worked for a short time but the doubled piece works perfect.
Hey if you're like me who already did this and the r1/l1/r2/l2 button still doesn't work, it might be the green contact trace on the plastic that is not connecting well to the gray contact trace. What I did was to get a pencil and basically traced/drew a line going from the green contact trace to the grey contact trace (do it a couple times like you're shading with the pencil but don't overdo it). Now try to put back the rubber pads and see if the contacts have been connected by the pencil line you drew (pencil has lead in it so it can make a contact), just try and try till the button finally responds. Hope this helps.
Had the issue where the R2 button wasn't working. Tried your method but didn't work, But I did fix it. If u have a spare controller that isnt working take the circuit board ribbon off the side that is not working and switch it with the one from the other controller clean the ribbons and contact areas and it should work.
need help with mine, too. my R1 automatically presses itself without me physically pushing the button, any idea of problem? the character from the game automatically dashes and it annoys me. thinking of buying a new one but it's really expensive.
@@chimptheblimpopen up and clean with alcohol on the pad and film if it don't work try using a small piece of paper under the film. That should get it working
Wow thank you for this! This is better than what I did. I shaded the rubber pad with pencil but I won't guarantee it as permanent solution. The foil is much better.
Well for better and faster you could just use tweezers and carefully pry out your L1 or R1 and when you fully get the trigger button out of the controller there should be a little white sorta rubber small button used to make the L1/R1 work use your finger to press to make sure it works and it’s not the trigger that’s broken then put the trigger back in that’s what I did and it worked
This does work but 1 thing I should have don’t different is that only my R2 wasent responding so I only put foil on the R2 sensor and it worked thanks Bro
This trick didn’t work for me but this is exactly what happened to my controller but just the opposite side. Bought this controller like two months ago, this just started yesterday. Tried the tin foil bow tie trick and idk if I didn’t crumple it enough or what but L1 and L2 work just fine so I switched that rubber piece over to the other side and it still didn’t work so I think it’s more internal than I’m prepared to go so off to Walmart for another new 60 dollar controller that will break again in two months. Great video though. Haha
Ich habe vorhin stunden mit dem aueinander nehmen und zusammen setzten des Kontrollers gebraucht, god sei dank das ich dann doch noch dieses Video gefunden habe, hatt einfach funktioniert
worked for me. . There was no damage to my l1, just seems to be a little off as far as it sits lower than the r1 button. So not sure if it was dropped or what. No sound broken parts when I shake the controller. So not sure why my l1 doesn't work at all. The aluminum foil works partially. It will randomly engage although I haven't push the l1 button. Will try thinner or thicker foil.
hey, I'm having the same issue with my controller, on my l1 it does not register and after this tutorial it partially works as you said, it randomly engages as well as sometimes it does not register some clicks. I was wondering if the thinner/thicker foil worked for you
Thanks for the video! Just a tip when ur showing something small hold your hand up behind it or a book or something big right behind it as u hold it up it will make the camera focus on the small thing.☺️
@@orlandogjoka9295 it worked for a few days but started fukin up again. What i did after that was get 3 layers of foil and fashioned it to shape over the rubber nipple rather than under it.
Just put tape at thw bottom of the L2 R2 button...like theres a place wheres its curve just put 3 or 4 layer and you will be good i did it once and it work..but sometime it can be the pad problem like its not place propaly just try both and if still doesnt work clean the area for old controller if doesnt work too then its time for new button and pad or controller 😊
My rubber peace doesn't have that lip??? It looks like it's supposed to insert directly into the plastic of the controller on the opposite side. It's not torn or damaged either
Hey man I tried the foil thing on both l2 and r2, it was working on l2 fine but r2 didn't get any better. I think my sensor thing is damaged any way how to replace and fix it?
I don't get why but it worked for about 30 minutes and then it stopped to work. I tried to change a foil but it didn't help. No i don't know what to do
My L1 and L2 isn't working and on my left joy stick it keeps going left and also when the controller light well stay green? And I have to shut off thr controller in game and turn it back on and it well work after that? I did clean the joy stick so I don't know if anyone can help me what's going on that would be great
I think my conductive tracer/film under the L1 L2 look different to yours .. if I do the way you've shown, the L1 and L2 can both trigger randomly because putting pressure on L2 seems to complete the circuit for L1 and L2 at the same time... ...I can trigger both independently with the buttons off, but with them on, pressing L2 triggers either because the controller is registering both signals... Is there a generation of controller where the L1 and L2 signals are registered in different places? I think that's the problem I'm having with this fix... I can just see the one spot under the L2 where I can trigger both signals from (L1l2). Don't have the fidelity with the trigger on the trigger one signal at a time though..
i tried so many different variations and did not work at all, infact it made my R1 even more sensitive and was going off when I was pressing the right trigger. how did this work for everyone but me lol
I've determined when I plugged the controller into my laptop that the R2 button is always pressed. What else can be done if this doesn't work? Will the only option be to have it repaired at a center?
How do you fix, when I hold down my l2 button for aiming the aim moves up without me pushing up so I have to compensate by holding down a little bit, if I just hold the l2 button I'll be looking at the sky
@@YazProperty I try doing that and it did work for a little bit and then it went right back to doing it again I noticed it only does it on call of duty mobile I bought the new call of duty Cold war and I haven't really had that problem guess I should just get a new controller
My controller worked perfectly fine, I took it apart to clean it and when I put it back together the l1 stopped working, I tryed this, tryed cleaning it, tryed swapping the butten pad thing and it wont work.... wtfff
Yes, this works!! Never thought it. It’s a bitch to get that tin foil in correctly and to cut it the right size. Patientce is required, but at least you don’t have to throw away money for a new one ✌🏼 cheers man thanks alot
ngl I tried this with an offbrand controller and It eventually worked, However when I press L1( the fixed one) and L2, only L2 works halfway. Its not a huge deal but its something to point out.
My R2 button stopped working one day when I was playing during a rainy day. And my brother refuses to let me dissassemble the controller. My two Xbox One controller also started failing for playing during rainy days.
Sony controllers are the absolute shit. I had the original controller and bought another from the shop. The R3 joystick started drifting to the right and the R2 button needed to be pressed really hard to respond. I bought a third controller as the previous broke and a month later the original broke. Only after 2 months the third controller also started drifting to the left.
Make sure that you are buying them from Walmart or Best Buy. Usually controllers from GameStop are refurbished and the ones from Amazon are usually fake and break pretty easily
Same deal. My last controller lasted like 4 years and ended up needing replaced cause I need to press R2 real hard like your saying. Both the new controllers my brother and I have bought within the past year have gotten stick drift. Mine was only 2 weeks old and right stick started drifting to the left. Has gotten worse since. FFW a month and now I think my left stick maybe starting to drift left. I dont drop my controllers and I keep them clean. Quality of the new controller also looks and feels like shit compared to my last one. Highly dissapointing. My controllers where both bought from Best Buy. I think its just cheap manufacturing on Sonys part and the company they use for joystick hardware.
Can confirm that this works! My L2 button was struggling big time. I didn't do the bow tie but I did do a tinfoil circle for the L2 section and I'm so grateful that it works. God Bless You Jay Edry!
You are a life saver. This stick works perfectly and I just spent almost $200 buying 3 new controllers. I didn't want to trash it because it's in great condition. Thanks for the help
I’m ashamed to admit I just smashed my controller playing elden ring and my L1/L2 weren’t working. I fixed it in a couple of mins just watching your video. You are a savior 🙏🏼 thanks
Same here, but mine was the r1. Imagine bot being able to do light and critical attacks
In my case I just dropped it by accident many times, but I get it, elden ring makes me want to yeet my controller sometimes. LMAO
Dang took me a year to figure this out🤣🤷
Thank you for this. My OG black controller had dead R2/L2 triggers. I was hesitant to buy new parts since I opened it up everything looked fine. I was also thinking of buying a new controller but I’m short on cash, with this video you just saved me like $80 for a new one.
Ain't that a beautiful thing
Thanks a bunch man, having patience is key. I can only imagine how many times you folded that tin foil to get it perfectly
I have been having problems with my L2 button. I tried everything, even changed the whole ribbon circuit board flex and it still didn't work. Had given up on the controller until I saw your video today. And it worked. Thank you
U can add silicone to the top of the button also to add more padding and it will totally work
Thanks a lot for this video. For my controllerI had to double up my foil. The single piece only worked for a short time but the doubled piece works perfect.
Hey if you're like me who already did this and the r1/l1/r2/l2 button still doesn't work, it might be the green contact trace on the plastic that is not connecting well to the gray contact trace.
What I did was to get a pencil and basically traced/drew a line going from the green contact trace to the grey contact trace (do it a couple times like you're shading with the pencil but don't overdo it). Now try to put back the rubber pads and see if the contacts have been connected by the pencil line you drew (pencil has lead in it so it can make a contact), just try and try till the button finally responds. Hope this helps.
i thought it was crazy to drew a line with pencil but mine is worked with your method, Thanks!!!! T_T really save my moneyyyy
@@muhdsyazwan_can u explain pls how bro ?
@@muhdsyazwan_ How I dont Understand it
bro wtf this works ❤️🔥
thanks man
Oh getting scientific on us. Smart very smart. I'll try when my parts come in
yo it worked for me!! r2 was stuck af for the longest, thanks a lot man!!!
Had the issue where the R2 button wasn't working. Tried your method but didn't work, But I did fix it.
If u have a spare controller that isnt working take the circuit board ribbon off the side that is not working and switch it with the one from the other controller clean the ribbons and contact areas and it should work.
hey bro can we get in contact, i really need help fixing my controller
@@bh-tabz5134 sup,what u need help with?
need help with mine, too. my R1 automatically presses itself without me physically pushing the button, any idea of problem? the character from the game automatically dashes and it annoys me. thinking of buying a new one but it's really expensive.
@@chimptheblimp the rubber under the button probs out of place, you would have to take it out and put it back in
@@chimptheblimpopen up and clean with alcohol on the pad and film if it don't work try using a small piece of paper under the film. That should get it working
Wow thank you for this! This is better than what I did. I shaded the rubber pad with pencil but I won't guarantee it as permanent solution. The foil is much better.
Dude your amazing my controller has been broken forever and now I can finally play with normally binds so thank you💙
Same sick of driving with R1 on GTA 😂
@@laide3596 lmao yess
@@gabbystansbury4958 when i play fn my fucking shit shoots by itself sometime the shoot button don’t work or the entire R2 button won’t work
@@ItsMiggy668 i am having the exact issue atm i cannot find a fix
@@gabbystansbury4958 😗🤪
Yo it totally works I was in aww when it was functioning thanks man cheers !!!!!
Mee too
Well for better and faster you could just use tweezers and carefully pry out your L1 or R1 and when you fully get the trigger button out of the controller there should be a little white sorta rubber small button used to make the L1/R1 work use your finger to press to make sure it works and it’s not the trigger that’s broken then put the trigger back in that’s what I did and it worked
Can u explain more plz
Thanks it works now
This does work but 1 thing I should have don’t different is that only my R2 wasent responding so I only put foil on the R2 sensor and it worked thanks Bro
This trick didn’t work for me but this is exactly what happened to my controller but just the opposite side. Bought this controller like two months ago, this just started yesterday. Tried the tin foil bow tie trick and idk if I didn’t crumple it enough or what but L1 and L2 work just fine so I switched that rubber piece over to the other side and it still didn’t work so I think it’s more internal than I’m prepared to go so off to Walmart for another new 60 dollar controller that will break again in two months. Great video though. Haha
Dude I can't thank you enough 💪🏽. I feel like ur a superhero
Just saved me 60 plus bucks thanks man I appreciate it 👍🏽💯
pretty good men, work still in 2021, just take your time .
Ich habe vorhin stunden mit dem aueinander nehmen und zusammen setzten des Kontrollers gebraucht, god sei dank das ich dann doch noch dieses Video gefunden habe, hatt einfach funktioniert
Benutzt der da Alufolie
@@nerminmusic6104 ja
worked for me. . There was no damage to my l1, just seems to be a little off as far as it sits lower than the r1 button. So not sure if it was dropped or what. No sound broken parts when I shake the controller. So not sure why my l1 doesn't work at all. The aluminum foil works partially. It will randomly engage although I haven't push the l1 button. Will try thinner or thicker foil.
hey, I'm having the same issue with my controller, on my l1 it does not register and after this tutorial it partially works as you said, it randomly engages as well as sometimes it does not register some clicks. I was wondering if the thinner/thicker foil worked for you
Try using just thicker paper under the contact film and plastic casing. Should work better than this
Thanks for the video! Just a tip when ur showing something small hold your hand up behind it or a book or something big right behind it as u hold it up it will make the camera focus on the small thing.☺️
Bro u helped me alot I didn't need this foil thing cause I had another controller with a good one
I am your 1000 subscriber
It worked!!! i can burn rubber in gta again :') thnx my dude
Really ?
@@orlandogjoka9295 it worked for a few days but started fukin up again. What i did after that was get 3 layers of foil and fashioned it to shape over the rubber nipple rather than under it.
@@Smokeymcpot713 thx am a try that
Can I use aluminum foil? Sorry I know shit about electronics
Yes you can
What about over responsive like if i touch the controller it goes off or i dont even got to touch it
Took me 2 hours just to make the perfect foil and still didn't work 😔
I just cleaned mi e thoroughly. The dark circular contact material gets sticky you have to clean it. Then it will work.
@@addictivstudio explain instructions
Just put tape at thw bottom of the L2 R2 button...like theres a place wheres its curve just put 3 or 4 layer and you will be good i did it once and it work..but sometime it can be the pad problem like its not place propaly just try both and if still doesnt work clean the area for old controller if doesnt work too then its time for new button and pad or controller 😊
dudde you dont know how much you helped us thank you man ❤
Watched this video to fix r2 and it helped a lot ty for sharing
Cheers. Got my R2 and L2 working again
This worked perfectly....thanks mate, just saved some dosh 👍
My rubber peace doesn't have that lip??? It looks like it's supposed to insert directly into the plastic of the controller on the opposite side. It's not torn or damaged either
You have a version 2 or later.
Fucking tinfoil jajajaja laughing because it worked brilliantly 10 minutes fix instead on buying a new one thx man for the video!
I tried this and still does not work... Please help?
Would this work for other buttons like some of the d pad ones?
yep it will work
how do you fit the spring on the first gen of ps4 controllers?
thank you very much. you solved me a big problem, I was going to buy anew sensor. 👌👌
Does it make a difference whether the colour of the plastic under the l1 prong thingy is green or blue?
Good question because mine is also green🤷
@@yesindeedbro no its doesnt make any difference aslong as it looks the same
i had to do l1 but for some reason when i got to the ps4 menu to try it out my l2 buton does what the l1 is supposed to do
It works but I had a problem where the L1 button started sticking, any way to remedy this?
Unplug it clean it
Shiiiiiiiiiiiii
How do you make a button mine is gone it flew off and i cant find it and im poor so how do i make a button
AliExpress
Hey man I tried the foil thing on both l2 and r2, it was working on l2 fine but r2 didn't get any better. I think my sensor thing is damaged any way how to replace and fix it?
Hi, my controller has L2 stick but not physically only the option of L2 is always pushed.
Can this help my controller?
Do you fix it? i have the exact same problem.
It didn't work with mine Iv been trying to figure out a way to get it to work but nothing works I think my controller is done for
I don't get why but it worked for about 30 minutes and then it stopped to work. I tried to change a foil but it didn't help. No i don't know what to do
I tried that it worked for a sec then it didn’t . I put new rubber and it worked then it went back to where it was . Idk what’s wrong with mines
i don’t think if it will work for me cus when i play red dead 2 i can aim and all but i can’t talk to people or rob stores
My L1 and L2 isn't working and on my left joy stick it keeps going left and also when the controller light well stay green? And I have to shut off thr controller in game and turn it back on and it well work after that? I did clean the joy stick so I don't know if anyone can help me what's going on that would be great
It really worked
Thanks a lot
Do you thing you could just cut out some flakes of tin foil then super glue it into those connectors, because it looks like a temporary repair
Glue would be in between the connections. I'm sure there is a better solution.
@@janimator0 honestly didnt expect a reply, a see your point
I think my conductive tracer/film under the L1 L2 look different to yours .. if I do the way you've shown, the L1 and L2 can both trigger randomly because putting pressure on L2 seems to complete the circuit for L1 and L2 at the same time... ...I can trigger both independently with the buttons off, but with them on, pressing L2 triggers either because the controller is registering both signals... Is there a generation of controller where the L1 and L2 signals are registered in different places? I think that's the problem I'm having with this fix... I can just see the one spot under the L2 where I can trigger both signals from (L1l2). Don't have the fidelity with the trigger on the trigger one signal at a time though..
Why not layer the tin foil only under L1?
Did u fix it? What did you do
lol I tried it and accidentally broke off the pins while trying to disconnect the ribbon and also lost the trigger spring I am an idiot 😭
Tanx man for your good video
Nice explanations
i tried so many different variations and did not work at all, infact it made my R1 even more sensitive and was going off when I was pressing the right trigger. how did this work for everyone but me lol
Dont call this a comeback!
sony glued those triggers really well XDXDeither you break em or they come out
How to do this with a slim controller😔
wouldnt that just constantly short the buttons tho?
I just did it. I makes it so the the button is always pressing down. In short: doesnt work
@@Bigger_boot i figured, thx
Plz help me when i press r1 my r2 also triggered at that time
oh just make 2 small tinfoil pieces(1 in each button) so that they dont activate at the same time
@@Proxz Right!
I've determined when I plugged the controller into my laptop that the R2 button is always pressed. What else can be done if this doesn't work? Will the only option be to have it repaired at a center?
Only seat the foil in the L1
So what did u end up doing?.. Still having trouble with my Left trigger
@@brytex4life i had it fixed 😂 the whole R1 R2 pad (i dont know what you call it the thin plastic) had to be replaced.
@@Ambrrrrritscoldinhere same i found an old remote replaced the mother board film too
Yeaa this don’t work for me. My L2 is now too responsive everytime I put the foil on it
Helpful video! Thank you dude
I didnt have this exact problem but this gave me an idea
Thanks dude i finally broke my controller ❤️
So basically u can add paper under the contact film and this will do the same thing. Jus enough to fill up the gap better
life saver 🙌🏽 thank you brotha
How do you fix, when I hold down my l2 button for aiming the aim moves up without me pushing up so I have to compensate by holding down a little bit, if I just hold the l2 button I'll be looking at the sky
Open the joystick , unplug the battery n outside cover carefully, then left n right stick blow n clean it with alcohol thats it boom
@@YazProperty I try doing that and it did work for a little bit and then it went right back to doing it again I noticed it only does it on call of duty mobile I bought the new call of duty Cold war and I haven't really had that problem guess I should just get a new controller
Try blowing into your stick its probably just dirty
@@TKD187 dead zone compensates for your stick going up
search up "thumbstick drift repair"
If u can't do all this just reset ur controller it worked for me
Where can i get tin foil, all i have is aluminum paper
Holy shit this actually worked, thanks man
The error is in the manufacturer I will make a video where the specific error is located and how to fix it if the error can be fixed
My controller worked perfectly fine, I took it apart to clean it and when I put it back together the l1 stopped working, I tryed this, tryed cleaning it, tryed swapping the butten pad thing and it wont work.... wtfff
Same bro
You clean your controller from the inside? Damm. You must be a dirty person or some
@@WebesJamm lmao
Yes, this works!! Never thought it. It’s a bitch to get that tin foil in correctly and to cut it the right size. Patientce is required, but at least you don’t have to throw away money for a new one ✌🏼 cheers man thanks alot
doesnt work for me
maybe i did it wrong but oh well
Same bruh, I don't know if I did it wrong or some but it didn't work for me so I just have it as my r1 and l1
Didn't work for me any other options
Yes
Hope this helps
But new 1 😁
You won't be able to use the buttons in apps just a fyi
Wait I got a new controller and it changed my settings do u know to change it back
Replacement controler
@@umaydniassuh6511 ?
first pls try pressing the rest button it worked for me idk how but it did
ngl I tried this with an offbrand controller and It eventually worked, However when I press L1( the fixed one) and L2, only L2 works halfway. Its not a huge deal but its something to point out.
Try only using foil on Trigger not L1
actual legend
tin foil substitute?
aye this made both of my buttons unresponsive
Lol
Lol
@@ahqused8678 lol
Same
@@anderson.jamese7979 lol
This actually pisses me offf I keep buying ps4 controllers one I can't sync to my ps4 Bluetooth and the other one the L1 Button isn't working
My problem with my controller is when I play nfs heat and when I accelerate, the car acceleration isn't as quick as it should be
It’s just you r2 button
Oh ok thx
Thanks, this works for me
Can i use aluminum foil
basically this is aluminum foil..North America called it tin foil
source : google
Appreciate this one!
Won't work for a static shock on the button
I tried this for my trigger and it's still not working?
Same issues bro it didnt work . . 😔😔😔
I say if you cant fix it you gotta do what you gotta do
For anyone in the comments wondering does this work before investing time and watching... YES. Appreciate you Jay !
It does fr?
Didnt for me 🤷
Thanks for that mate 👍🏾
My R2 button stopped working one day when I was playing during a rainy day. And my brother refuses to let me dissassemble the controller.
My two Xbox One controller also started failing for playing during rainy days.
What? Are you playing outside?? If you’re playing at home indoors why would rain be a problem?
@@leetraviusmckay2.066 humidity getting into the controller.
Buy a roof
This work for a sec then didn't work anymore. Too bad no one knows how to fix this L1 button without replacing parts.
My option button broke from mother board what can i use to press it
Replace it with share button
@@nsr6524 how to do it sir
But new controller
It worked for me for a while then stopped after a day. had to do it again. So what's the science behind it? Just bad conductivity?
try cleaning the connections with Rubbing alcohol
Sony controllers are the absolute shit. I had the original controller and bought another from the shop. The R3 joystick started drifting to the right and the R2 button needed to be pressed really hard to respond. I bought a third controller as the previous broke and a month later the original broke. Only after 2 months the third controller also started drifting to the left.
Make sure that you are buying them from Walmart or Best Buy. Usually controllers from GameStop are refurbished and the ones from Amazon are usually fake and break pretty easily
Same deal. My last controller lasted like 4 years and ended up needing replaced cause I need to press R2 real hard like your saying. Both the new controllers my brother and I have bought within the past year have gotten stick drift. Mine was only 2 weeks old and right stick started drifting to the left. Has gotten worse since. FFW a month and now I think my left stick maybe starting to drift left. I dont drop my controllers and I keep them clean.
Quality of the new controller also looks and feels like shit compared to my last one.
Highly dissapointing.
My controllers where both bought from Best Buy. I think its just cheap manufacturing on Sonys part and the company they use for joystick hardware.
Didn't work at all for me
Good shit bro