I know this isn’t easy sharing, but I want to commend you for the great hard work you have been putting up in all your videos since I subscribed to your channel. Thanks for sharing .
!!!!Awesome wow the boys going to hav fun this summer great ideas to keep them busy great plan thanks so much for sharing your project with us from Canada 🇨🇦 SK later ya got me signed up ready to!!! Getter done keep them coming mighty fine man dont have to be a rocket scientist to understand how and why easy peasy in my books now as long Ma dont find out critters will be gone keep Ma happy eating her garden !!!! No more !!!! Boom ya gone thks
I'M ONLY INTO THIS VIDEO FOR 77 SECONDS AND I LIKE THIS GUY ALREADY! I MEAN FOR REAL, I RARELY USE A TAPE OR A SQUARE WHEN DOING SIMILAR SCHNIITE! HOWEVER, HIS EYE SIGHT HAS TO BE BETTER THAN MINE =BECAUSE THOSE CUTS LOOK CNC-ESQUE! KEEP UP THE GOOD WORK, IT CAME OUT GREAT!
I don't know what it is... But there is just something about the sight of a shotgun bieng cocked that makes you stop in your place, really awesome dude.
I've watched a couple of your videos. Is there some where that you have a material list, measurements and drill sizes to use? Also what type of glue do you use? I'd like to get that right. Any help or suggestions would be greatly appreciated. Thanks!
Muy buén trabajo ya era hora de que inovaras en los diseños espero que sigas trallendo contenido asi y queria saver si harias algún tipo de rifle con cargador extraible?🤔😎
Beautiful work 👍 here in Denmark you would need a permit to build it, a special license to own it, and it must be kept in a gun safe at all times and it can only be used by the license holder on private property…. I kid you not 🤷
In France here it's even worse, you have to be part of a shooting range, own a permit, have two safes, one for the bullets, one for the gun. An artisanal like this would directly be confiscated
I'm looking at the barrel on this thing and I'm guessing it's stainless steel but the way that blade cut through like it was butter I've gotta ask what brand blade is that? Second view and I see it's very thin walled metal but still if it's stainless that blade is damn impressive.
@@diycrossbow cut like butter. I damn near burst into flames the other day cutting a padlock off. Actually my shirt did burst into flames. I'm no longer a hairy chested bastard.
You could put a peice of conduit pipe on the end and a shotgun slog and then use this mechanism it break the primer and you would have a accual shotgun
I feel like this man has found the solution to world peace
Thanks
world war is fought with tungsten steel (also known as gun metal) not 304 and 316 steel
Pertama nonton,saya pikir orang luar bang...
Ternyata orang INDONESIA 👍🇮🇩😁
Terimakasih bang🙏
Is it a sling shot? Is it a pump action pellet gun? Has a hint of crossbow to it…hb It’s BEAUTIFUL, absolutely beautiful 😂
Thanks🙏🙏🙏
All bow down to the power of superglue!
Very nice and love the music,
Thanks🙏
Muy bueno el vídeo, tienes un plano o diseño para replicarlo?
Королевский лайк. Профессионал
Thanks for watching🙏
Ku kira orang luar. Ternyata orang indonesia.
Mantap
Terimakasih bang🙏
Baru tau??? 😂😂😂
Sama 😅 🇮🇩🇮🇩
@@diycrossbow collab sama Joerg Sprach bang
Nice video... real life rust
Кстати ,это действительно ,чуть ли не единственный,в Ютьюбе ,многозарядный ,полуавтоматический не огнестрел!!! Весьма похвально!!! Интересная штука!!!
Thanks for watching🙏
So much 3d printed guns full auto on UA-cam but what do I know 😂
Very nice build, i love this one 👍
Thanks🙏
Чего хорошего увидел? Как руки трясутся?
I know this isn’t easy sharing, but I want to commend you for the great hard work you have been putting up in all your videos since I subscribed to your channel. Thanks for sharing .
Thanks brother🙏
nice🎉
Thanks🙏
!!!!Awesome wow the boys going to hav fun this summer great ideas to keep them busy great plan thanks so much for sharing your project with us from Canada 🇨🇦 SK later ya got me signed up ready to!!! Getter done keep them coming mighty fine man dont have to be a rocket scientist to understand how and why easy peasy in my books now as long Ma dont find out critters will be gone keep Ma happy eating her garden !!!! No more !!!! Boom ya gone thks
Nem que eu tentasse fazer isso aí dez vezes, eu não conseguia kkkk.parabens irmão tamo junto parceiro.
Thanks🙏
Rancangan dan ide yang bagus 👍🏻👍🏻
Terimakasih🙏🙏🙏
Great work! Great piece!😁👍🛠️🔧
Thanks
Work of a genius. And I love it.
Thanks my friend🙏
Akhirnya nemu channel yang kreativ dari indonesia
Terimakasih bang🙏🙏🙏
You should call this the slingshotgun.
It sounds cool.
Thanks
О - о - о! Новый конструктив рогатки, замечательно! 👍🤝
Thanks🙏🙏🙏
This guy is getting good everyday.
Thanks🙏🙏🙏
Are there plans available?? You do amazing work!! Thank you!!!
Defato um trabalho de mestre, parabéns meu irmão
Thanks for watching🙏🙏🙏
Ok guerreiro abençoado, vc é inteligente na moral mermo parabéns.
Amazing job I like the attention to your detail and comfort, urine artist that was amazing
Thanks🙏
Liat videonya kaget loh koq dijual ditoped...ternyata org indonesia...mantap....boleh coba dipesen nih...ready berapa lama bang...
I'M ONLY INTO THIS VIDEO FOR 77 SECONDS AND I LIKE THIS GUY ALREADY! I MEAN FOR REAL, I RARELY USE A TAPE OR A SQUARE WHEN DOING SIMILAR SCHNIITE! HOWEVER, HIS EYE SIGHT HAS TO BE BETTER THAN MINE =BECAUSE THOSE CUTS LOOK CNC-ESQUE! KEEP UP THE GOOD WORK, IT CAME OUT GREAT!
Thanks🙏
I think it is just brilliant! I think anyone worth their salt would be ecstatically grateful if they received one as a gift and could show it off😉👆🏻
Thanks🙏
Thanks interesting concept there on the attachment of barrel to the stock. Learn something new and A New Concept a lot that's what life's about
Thanks for watching🙏
Parabéns pelos trabalhos, deixo aqui uma ideia, de deixar os moldes fixados no 1º cometário, assim poderemos replicar, ou pelo menos tentar rsrs.
Thanks🙏
I don't know what it is... But there is just something about the sight of a shotgun bieng cocked that makes you stop in your place, really awesome dude.
Thanks for watching🙏🙏🙏
Honestly bro you've got a very creative mind. But I still think if possible you should fab up a metal trigger.
Nice🙂↔️🙂↔️
Thanks🙏
Судя по стене, можно не заходя на канал автора понять, что это не первая его пушка😉
Thanks
A great build!
Thanks🙏
😮ficou muito top parabéns 👏👏👏👏👏👏👏👏👏👏👏👏👏👏
Thanks🙏🙏🙏
muantap kang terus lajut kreasinya,,,dan coba bikin laras agak pangjan pasti lebeh jos dan tambah keren
Terimakasih🙏🙏🙏
Kita ke papua dengan ini!🗣🔥🔥🔥
I've watched a couple of your videos. Is there some where that you have a material list, measurements and drill sizes to use? Also what type of glue do you use? I'd like to get that right. Any help or suggestions would be greatly appreciated.
Thanks!
Es muy bueno tu entuciasmo pero hasta ahora sera mejor aprender a ensallo y error las medidas y materiales
10:13 10:13 10:13
Benar ku kira jg org luat neg , ternyata nkri jg....👍👍👍
Siiipp kang
Terimakasih bang🙏
Great video, great music, you must have one steady hand to cut that slippery chrome tubing so straight that way!!
Thanks🙏
Compraria não, comprarei! 😍
Thanks🙏
Muy buén trabajo ya era hora de que inovaras en los diseños espero que sigas trallendo contenido asi y queria saver si harias algún tipo de rifle con cargador extraible?🤔😎
Thanks for watching🙏🙏🙏
The design is so creative
Thanks for watching🙏
Must be some badass super glue. Everytime I use glue this way it never holds at all.
If press it. It will be stronger
真漂亮❤
Thanks🙏
Mantep tenan iki uwonge seng gae tembak iki ba👍👍👍👍🤝🤝🤝
Suwon mas🙏🙏🙏
itu tinggal ditambah pembidik aja lagi
Wow!!! that is awesome. Do you have any drawing plans with measurement on how build it.
Just play it by ear. Build and learn haha
Это конечно хорошо, но много возни и толку мало! Обычная рогатка с шариками - проще и не хуже!!!🙂
Watch and learn, the day is coming when your gonna need this
Thanks
Now... Use high quality wood, higher quality steel (example: steering shaft), a hammer-cocking mechanism. 😁😂
Thanks🙏
Never happy huh
that magnet hack is genius
Thanks my friend🙏
Good work👍
Thanks🙏
Beautiful work 👍👍👍
Thanks🙏
Beautiful work 👍 here in Denmark you would need a permit to build it, a special license to own it, and it must be kept in a gun safe at all times and it can only be used by the license holder on private property…. I kid you not 🤷
Thanks for watching🙏
I don't believe you.
In France here it's even worse, you have to be part of a shooting range, own a permit, have two safes, one for the bullets, one for the gun. An artisanal like this would directly be confiscated
So you need a license and a safe for Airsoft too? No gunpowder involved, no permit, no safe.
@@tinogoch that's why airsoft guns have that strange orange muzzle here 😇
Nice work 👍
Thanks🙏
Beautiful Design
Thanks🙏
Wow top Work!👍💟👍
Thanks🙏
wow, It looks so powerful
Thanks🙏
Creative art for sure you should put all of them on the wall somewhere and take a picture
Thanks
I fell in love with it❤️
Thanks🙏
🎉🎉🎉 😮👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽💯 Simple but beautiful concept
Thanks🙏🙏🙏
`Nice👍👍
Thanks🙏🙏🙏
muito bom, parabéns pelo trabalho.
Thanks🙏🙏🙏
Watching po idol❤
Thanks
You obviously come from a country that has outlawed firearms. Where are you from? Your work is exquisite
Nice pump action.
Thanks🙏🙏🙏
Wow magic 🙏❤
Thanks🙏
I'm looking at the barrel on this thing and I'm guessing it's stainless steel but the way that blade cut through like it was butter I've gotta ask what brand blade is that? Second view and I see it's very thin walled metal but still if it's stainless that blade is damn impressive.
It ordinary blade. I use from every brand it no matter. Thanks🙏
@@diycrossbow cut like butter. I damn near burst into flames the other day cutting a padlock off. Actually my shirt did burst into flames. I'm no longer a hairy chested bastard.
@@davidreynolds4684 daymmmm
Looks like basic rolled stainless, like you'd find holding up car ports, or old vacuum handles
Badass design... ❤
Thanks🙏
Einfach nur genial👍🏼
Thanks🙏
Nice, i like it👍.
Thanks🙏
Amazing ❤
Thanks🙏🙏🙏
DIY content is preferable with a link to drawings or a place to acquire them! Just saying!!!
Thanks
Very beautiful. Are you selling these custom toys worldwide?
Thanks, Indonesia only🙏
Wow nice job
Thanks
Bang,kalau bisa dibikin lebih besar lagi bang 😄😅
Tapi keren lo slingshotnya 👍
Thanks🙏
very nice ❤❤❤
Thanks🙏🙏🙏
Very nice ❤❤
Thanks🙏
Respect good job
Thanks🙏
It's a masterpiece
Thanks🙏
You're welcome, and thank you for sharing the design
Really cool kids would love that
Thanks🙏
Parabéns, show 👏👏👏
Thanks🙏
I'd be terrified of those projectiles bouncing back, i hope you wear adequate protection
You could put a peice of conduit pipe on the end and a shotgun slog and then use this mechanism it break the primer and you would have a accual shotgun
Thanks for watching🙏
Very good!
Thanks🙏
muito bem feito show....
Thanks🙏
What kind of glue did u use? It seems really strong!
Cyanoacrilate
This is the fourth time I’ve listened to this to get to sleep
Thanks
😂
kalau ada yg ukuran panjang 68cm aku mau beli bang. keren banget ini
Dah laku semua bang🙏🙏🙏
@@diycrossbow ada link toko shopee nya bang? Aku pantengin klo ada 😁
Genial 👌
Thanks🙏
Glanced at the title and thought it read Pimp Action Slingshot 😂
Thanks for watching🙏
It is kinda pumped out though
А вот это уже классная вещь😅
Thanks🙏
What glue do you use?
Cyanoacrilate
Thanks
Was that sand that u super glued to sides of the barrel just wondering that's a cool idea if it sand
Thanks🙏
Ur welcome so it was sand awesome
Tienes un plano con medidas para replicarlo.
add a area to add longer projectiles like arrows or nails
Thanks
@@diycrossbow btw as a gun guy I think you should show how powerful this weapon is or try to make one that can fire a .22/.32 5-7mm BB at high speeds
Dimana saya dapat memesan slingshot ini ?
Clever, very clever..
Thanks🙏🙏🙏
if only he could cut his fingernails as good as he cuts wood...
Thanks