It's a bit strange design as normally, you want a rather long-ish barrel and proportionally small striker. This pistol has a tiny barrel but a _huge_, rifle-like striker...
yeah absolutely. bc is gonna suffer like crazy with the barrel so short. should have made the barrel longer and moved the chamber and action back in order to keep the same oal. he has the tools to do it much better. probably just the simplest thing he came up with at the time. 1st or 2nd prototype. but it woks ok.
И мелканы)), один из моих экземпляров даже в ментовке на стенде красовался, я их как пирожки точил. Напильник и ручная дрель... таких наверное и не выпускают сейчас. Вот это были ощущения!
Всё зависит от количества джоулей на которую рассчитана эта поделка. Если строительный патрон хороший, и подшипник использовать, как в револьвере, но с раздельным заряжанием - то это будет конструктивно схожее с оружием изделие. Но, не оружие. А, вот выдать такая штука может в районе 50 джоулей, что позволяет теоретически проломить тупой череп человека который на тебя напал. Да, намеренно использовать его в качестве средства самообороны нельзя. Но, вот когда это дело случая, то можно. Такая вот, коллизия законодательства. Используйте для самообороны всё. Но, не носите с собой специально для этого ничего не разрешённого законом. Хотя, доказать что ты специально носил с собой даже кухонный нож для самообороны - практически нереально. Что уж говорить про такие вот поделки под пистоны или немощный холостой строительный патрон.
@@krestinoliki1836 внучёк, сейчас я тебе расскажу, как мы в 70-е с помощью ножовки по металу, напильника, пилы по дереву и ножа, в разы лучше делали пистоль именно под 22 lr, а не под пистон как у тебя. Шли на шахтный двор и с гидростойки отпиливали цельнотянутую трубку высокого давления с толщиной стенок около 3 мм и внутренним диаметром 6 мм чуть прослабленный под мелкашечную гильзу, стреляные гильзы собирали на ДОСААФовском стрельбище, пробивали по середине шляпки гильзы цыганской иглой отверстие и клеили бумажный пистон, в гильзу если не могли достать порох, чистили серу со спичек, пыжевали, и вкладывали или дробину, или шарик с подшипника по диаметру. А сам пистолет вырезался из дерева, у меня была возможность, был из текстолита, крепился ствол и шпингалет подпружинивался, или резинкой с бинт резины, или подбиралась пружина. Дальше, кто большим пальцем поднимал ручку шпингалета и засов бил по пистону на патроне, у кого руки не с жопы, те делали УСМ. А своё одоробло выкрась и выбрось.
I am a new subscriber. I am very impressed with your abilities. I can't wait to see all of your videos. Thank you for taking us on your adventure through mechanical engineering. Hello, for Detroit, Michigan USA.
I have been thinking about making one for days. I thought I was the only one thinking about this in the world. It seems that someone beat me to it. I want to make an air rifle with the same idea that can shoot a 5.5 or 1.77 caliber projectile. But I did not know how powerful that red capsule or explosive would be. Would its explosion generate air capable of pushing the projectile to long distances exceeding 100 yards?
This gentleman is a former professional gunsmith or a turner of the best around with knowledge and extreme preparation, look at his equipment even if you succeed he would most likely make your hands or face explode with serious injuries up to death, he is a genius
Open bolt restriction probably only applies in the USA. Given that it's a single shot pistol it probably would not apply even then. Now, if he added a magazine, he'd have a machine gun. Which would be a totally different kettle of fish.
I am clenching my teeth watch him grindstone with gloves, hand close to lathe jaws, leaning over lathe to with emery paper, leaving chuck key in you a brave man
I wish that you would have shown what exactly is in the barrel. Is it a firecracker with a fuse, is a fusless charge, is it black powder, is there a projectile? If there is a projectile, what is it? Is it a pellet, a ball, etc.? Is there a wad? I have so many questions.
@@drpcr7Yes. That is why he is wearing them. Many people do. Also to avoid sparks. However, once you have seen someone get their hands dragged into a machine by their gloves, you will never wear them again. It is horrible to see. Also, it isn't necessary to over-heat a part when grinding. You go slowly and you don't get burnt. Or use vice-grips. By the way, I do accept that a grinder can be less "grabby" than many other rotating tools, but it remains bad practice to wear gloves. I am not criticising the guy, I just think we machinists should share our experiences with one another to keep ourselves safe.
@@FrustratedBaboon there's another version of this that's common. The barrel unscrews and it has 2 barrels. 1 like he's got. The other one uses rim fire cartridges and instead of the giant handle on the side it's got a big ring on the back like a nerf gun
В детстве быстрей собирал ружбайку. Кусок доски, трубка под патрон от мелкашки, шпингалет и резинка. При определенном затачивание шпингалета гильза вылетала автоматически после выстрела 😂. Однажды друг её поймал грудью, крови было много. Врали как могли чтобы родители не узнали 😂😂😂
А у нас у одного мелкан осечку раз 100 дал, он решил перед девчонками красануться, к виску поднёс... и зарыли. Да ули там, я сам дружбану ради прикола меж глаз целился, а он, типа: - да давай мне пох.. а у меня крючок через пружину перескочил с щелчком, я чуть и не обделался). До сих по вспоминаю и шерсть дыбом встаёт. Я их тогда ка семачки, в неделю по 5 штук точил)
I could be wrong, but I think open bolt guns are illegal, because they can be easily converted to machine guns. I see yours is a single shot, but still. . .
can you do one chambered in 357mag & a barrel with just enough length to allow one of the best cartridges ever made a legit chance to shine in at least some of its very impressive history & glory? Cause your work is also very impressive indeed!
@@ВасяВодовозов-п9й не совсем. Многие детали они заказывали у знакомых на разных заводах. Многие детали напильником и зубилом на колене сделать просто невозможно.
If my neighbors have all that equipment here in the Philippines , they can make a full automatic M4 or M16, but in your case you made a single shot 22 pistol. Why?
Making barrels dude and uppers is another ball game. Plus I’m pretty sure this vid was made to show how easy some things are to make, plus it’s his own design he came up with, to make M16s and M4 clones would take a lot of skill and year of perfection and schooling
Sadly the m4 and m16 etc. are being bought and used by terror groups and criminal organization here in the Philippines you can see it in news everyday, one example is the 2016 marawi siege mostly all the guns used by the terror are backyard made.
Lets see your content..... Oh, you got nothing but words. Get a grip boy. You just go around to content creators and talk smack?? Is that what moves you? Is that fulfilling and edifying in your small (boys) world?? Meanwhile, this MAN is down in the shop, getting his hands dirty, testing new materials in cap gun manufacturing, (bondo) Using his mind, this MAN has planned and gave us a demonstration of HIS design. He spends his time USING his tools, gaining insight and practices his trade.. He doesn't ask us for one single thing, does he? He just puts his work out there for anybody to watch. I would say he gains by doing this, that he really LEARNS SOMETHING by doing this.... (You, not so much, boy) Not to mention... He started his youtube channel, he recorded and edited vid... uploaded it, etc what did you do boy??
Good vid man. New sub here. Great idea using the bondo! That gives me several ideas for different projects im doing.... I never thought of using bondo!! Also, the smack talkers in the comment section are JEALOUS LOSERS. Please dont pay them any mind... They shit post all over youtube, cause they dont have the talent or skill to become content creators like you have done ... Theyre little boys, and sometimes they act like total bullies.. Screw em'! Ignore em'!
Can you make an over-engineered nerf gun? Specifically, there is a Nerf gun that is similar to this, called the Rifling Swin. It's almost functionally the same as this, with some minor differences.
I don't care what anybody says nice work
It's a bit strange design as normally, you want a rather long-ish barrel and proportionally small striker. This pistol has a tiny barrel but a _huge_, rifle-like striker...
Still cool nonetheless!
yeah absolutely. bc is gonna suffer like crazy with the barrel so short. should have made the barrel longer and moved the chamber and action back in order to keep the same oal. he has the tools to do it much better. probably just the simplest thing he came up with at the time. 1st or 2nd prototype. but it woks ok.
the longer gun barrel gives more precision
and more power or speed of the projectile as it gets pushed longer by the explosive gasses from the gunpowder
ATF: Ya’ll behavin in here? 👨🏻🦱
В детстве при помощи дрели и напильника такие же игрушки собирал только под строительные патроны и шарики от подшипника)))
И мелканы)), один из моих экземпляров даже в ментовке на стенде красовался, я их как пирожки точил. Напильник и ручная дрель... таких наверное и не выпускают сейчас. Вот это были ощущения!
@@Konstantin_otdelka_remont_SPbтокой вапрос.?ручку с патроном от милкашки зделать сможешь?
@@AarturMai не смогу, станков нету и сидеть не хочу
@@AarturMai мелко плаваеш😂😂😂😂😂
@@сергейколодин-ч7щ Со строительным слишком геморно, тоже делал. Долго заряжать
Красиво получилось. Как раз на шесть лет тюремного заключения )))))))))))))
Не, по первому разу много не дадут. В России. А в США за это даже административки нет.
с такими мыслями толку от вас никогда не будет.
Это не тянет даже на мои школьные поделки на коленке😂😂😂😂
Мой пистоль пробил доску 40 мм и 15 см стены саманной в сарае
@@yuriyromanchenko285👍👏🤣🤣🤣
Всё зависит от количества джоулей на которую рассчитана эта поделка. Если строительный патрон хороший, и подшипник использовать, как в револьвере, но с раздельным заряжанием - то это будет конструктивно схожее с оружием изделие. Но, не оружие. А, вот выдать такая штука может в районе 50 джоулей, что позволяет теоретически проломить тупой череп человека который на тебя напал. Да, намеренно использовать его в качестве средства самообороны нельзя. Но, вот когда это дело случая, то можно. Такая вот, коллизия законодательства. Используйте для самообороны всё. Но, не носите с собой специально для этого ничего не разрешённого законом. Хотя, доказать что ты специально носил с собой даже кухонный нож для самообороны - практически нереально. Что уж говорить про такие вот поделки под пистоны или немощный холостой строительный патрон.
Что-бы с пистона стрельнуть, надо было 1,5 кг железа нагородить?
Можно в перед пистона пороха и пулю вальнуть
Будет стрелять
при создании боевого оружия уходит до 5кг металла, так что не плач дед.
@@krestinoliki1836 при чем здесь боевое оружие, к этому одороблу? С дуру можно и фуй сломать, так нужно было видео назвать.
@@alekspog1502 дед иди таблетки попей, он не потратил лишнего металла на самопал под .22 лр.
@@krestinoliki1836 внучёк, сейчас я тебе расскажу, как мы в 70-е с помощью ножовки по металу, напильника, пилы по дереву и ножа, в разы лучше делали пистоль именно под 22 lr, а не под пистон как у тебя. Шли на шахтный двор и с гидростойки отпиливали цельнотянутую трубку высокого давления с толщиной стенок около 3 мм и внутренним диаметром 6 мм чуть прослабленный под мелкашечную гильзу, стреляные гильзы собирали на ДОСААФовском стрельбище, пробивали по середине шляпки гильзы цыганской иглой отверстие и клеили бумажный пистон, в гильзу если не могли достать порох, чистили серу со спичек, пыжевали, и вкладывали или дробину, или шарик с подшипника по диаметру. А сам пистолет вырезался из дерева, у меня была возможность, был из текстолита, крепился ствол и шпингалет подпружинивался, или резинкой с бинт резины, или подбиралась пружина. Дальше, кто большим пальцем поднимал ручку шпингалета и засов бил по пистону на патроне, у кого руки не с жопы, те делали УСМ. А своё одоробло выкрась и выбрось.
Трубка, шпингалет, пружинка или резинка на деревяху за пять минут тоже самое делали в детстве
судя по всему, дядя думал о другом, но съехал на пистон))))
эйэй! не раскрывай секрет! у них шпингалеты не производят!
@@Slashire да... шпингалет вещь хорошая, почти готовая)))
Данила бы не одобрил)
Кто знает чем он железо мазал? Какой-то полимер?
That’s really cool it shows how simple it is it’s just a pipe with a closed end, essentially!
I am a new subscriber. I am very impressed with your abilities. I can't wait to see all of your videos. Thank you for taking us on your adventure through mechanical engineering. Hello, for Detroit, Michigan USA.
I have been thinking about making one for days. I thought I was the only one thinking about this in the world. It seems that someone beat me to it. I want to make an air rifle with the same idea that can shoot a 5.5 or 1.77 caliber projectile. But I did not know how powerful that red capsule or explosive would be. Would its explosion generate air capable of pushing the projectile to long distances exceeding 100 yards?
This gentleman is a former professional gunsmith or a turner of the best around with knowledge and extreme preparation, look at his equipment even if you succeed he would most likely make your hands or face explode with serious injuries up to death, he is a genius
Short barreled low velosity. Nice if that is all you can get . Illegal if fired from open bolt.
Open bolt restriction probably only applies in the USA. Given that it's a single shot pistol it probably would not apply even then. Now, if he added a magazine, he'd have a machine gun. Which would be a totally different kettle of fish.
Nice sharing👍
Thanks for visiting
Cool..looks fantastic. Great upload
I am clenching my teeth watch him grindstone with gloves, hand close to lathe jaws, leaning over lathe to with emery paper, leaving chuck key in you a brave man
I wish that you would have shown what exactly is in the barrel. Is it a firecracker with a fuse, is a fusless charge, is it black powder, is there a projectile? If there is a projectile, what is it? Is it a pellet, a ball, etc.? Is there a wad? I have so many questions.
Another quality production by the ATF !
Shhh the nsa might be watching
1st class quality😀😀😀
ต้องการสิ่งนี้@@miguelcastaneda7257
عالی خیلی عالی مهندس زحمت کشیدی
Please do not wear gloves near rotating machinery.
Took me an hour to explain this to a safety guy at work.
But he is only wearing gloves because of the heat. If he would do it with bare hands he would get burnt by his fingers.
@@drpcr7Yes. That is why he is wearing them. Many people do. Also to avoid sparks. However, once you have seen someone get their hands dragged into a machine by their gloves, you will never wear them again. It is horrible to see. Also, it isn't necessary to over-heat a part when grinding. You go slowly and you don't get burnt. Or use vice-grips.
By the way, I do accept that a grinder can be less "grabby" than many other rotating tools, but it remains bad practice to wear gloves.
I am not criticising the guy, I just think we machinists should share our experiences with one another to keep ourselves safe.
@@Carl-sh7kfVery very true
Said the carpenter when he lost his last finger
Excelente idea 💡💡💡
Bro I Love The Trigger of this gun Loved It. Make Project Like This Man This Is Soooo GOOD
el gatillo esta muy sensible ..ajusta eso que es muy peligroso!!
Cara eu tive umas ideias por algum tempo.Vendo esse vídeo me ajudou muito no desenvolvimento do meu projeto... Muito obrigado :)
Excelente video maestro ,y para q calibre es ,x fa
❤
สั่งปืนผสมปืน
Very nice. 1 more step and you could Have had a blow back
No. Not possible.
Not illegal if it is a muzzleloading pistol. If Cartridge rimfire or centerfire itwould be considered illegal.
Are you speaking for all countries in the world??? UA-cam videos aint just watched by americans you know!!!
Hello 🤩 thanks for your video 🤠... what is it for steel please?
😂😂bro don’t create this at home. It’ll explode on u prolly nd ur gna go jail
@@DonAl_Capone off course 😉 it's just for now...I like steel and the different steel..... that's why I want to now, but thanks for your answer ❤️👍😘
Need you to make inward parts to Sabata's gun
are you using bench lathe?
Poderia disponibilizar gabarito PDF com medidas reais pra produzir as peças ?!
Reinvent the inline muzzleloader into a pistol is what you have done
No, he invented his own design.
@@FrustratedBaboon there's another version of this that's common. The barrel unscrews and it has 2 barrels. 1 like he's got. The other one uses rim fire cartridges and instead of the giant handle on the side it's got a big ring on the back like a nerf gun
Good work I am a fan keep it up may I ask what lathe are you using and where can I purchase one thanks for sharing
Is this inertial occlusion?
Para cal 22, queda. Excelente.
Design is awesome!
No tienes uno de estos a la venta o los planos
В детстве быстрей собирал ружбайку. Кусок доски, трубка под патрон от мелкашки, шпингалет и резинка. При определенном затачивание шпингалета гильза вылетала автоматически после выстрела 😂. Однажды друг её поймал грудью, крови было много. Врали как могли чтобы родители не узнали 😂😂😂
А у нас у одного мелкан осечку раз 100 дал, он решил перед девчонками красануться, к виску поднёс... и зарыли. Да ули там, я сам дружбану ради прикола меж глаз целился, а он, типа: - да давай мне пох.. а у меня крючок через пружину перескочил с щелчком, я чуть и не обделался). До сих по вспоминаю и шерсть дыбом встаёт. Я их тогда ка семачки, в неделю по 5 штук точил)
disegner ttecnical ????
Im pretty sure, with a little bit change, it can fire for real.
what metall is the pipe
It is used for marriage. And can it kill a person?
Can i buy thi weapon?
How to buy this product sir tell me
Reduce firing system because ring cap doesn’t require a lot of force and increase barrel length to 4 inches now you have a powerful muzzleloader
How to avail and how much
How do I get the project, technical drawing

Quite good work on the details of the not real - firecracker object. Bravo!
Excelente trabajo
The guns looks so nice.
I wonder if you could put the firing pin on the pull back and a 22 bullet in the end instead to shoot 4real
you 100% “cannot” as it’s illegal and no one can stop you
Untuk ukuran besi primer berapa mili?
такой большой затвор и такой маленький по длине ствол говорит о точности стрельбы)
I could be wrong, but I think open bolt guns are illegal, because they can be easily converted to machine guns. I see yours is a single shot, but still. . .
😂😈
Looked like a cap gun... Or black powder cap and ball
@@ephenseyst in fact, actually it's 😁😈
can you do one chambered in 357mag & a barrel with just enough length to allow one of the best cartridges ever made a legit chance to shine in at least some of its very impressive history & glory? Cause your work is also very impressive indeed!
Puedes compartir medidas o instrucciones para fabricar una porfavor
دیدنش خالی از لطف نبود❤ممنون از شما ،بسیار لازم میشود برای کسی که سلیقه وابتکار داشته باشد ❤
Very interesting, thank you! What kind of percussion caps are these? They look like the ones in toy guns.
it is.
Heavy metal..y not use polymer..for advance revh na now ..
Whats that putty u put sir?
Имея такое оборудование, можно делать многозарядное оружие с намного более лучшим дизайном.
Толстопятовы делали автоматы на коленке напильниками , зубилами, и молотками.
@@ВасяВодовозов-п9й не совсем. Многие детали они заказывали у знакомых на разных заводах. Многие детали напильником и зубилом на колене сделать просто невозможно.
Имея такой пистоль,пока перезарядеш из тебя друшлак с белают😂
STEP 1: Purchase $100K worth of equipment...
If my neighbors have all that equipment here in the Philippines , they can make a full automatic M4 or M16, but in your case you made a single shot 22 pistol. Why?
Making barrels dude and uppers is another ball game. Plus I’m pretty sure this vid was made to show how easy some things are to make, plus it’s his own design he came up with, to make M16s and M4 clones would take a lot of skill and year of perfection and schooling
😂
Sadly the m4 and m16 etc. are being bought and used by terror groups and criminal organization here in the Philippines you can see it in news everyday, one example is the 2016 marawi siege mostly all the guns used by the terror are backyard made.
Here in America we have the ATF to worry about, We can't just go on making fully automatic firearms
because he inferior than you
not fully understand the assembly of barrel
А?в верх как стрелять?кто патрон будет держать?
Awesome 👌
How much?
"Not real gun"
💥DHUARRRRRRRRR🔫
Hello dear friend I can only watch you build it ,i can't build it me can hardly catch the styles 😊
I need one like this for starting the athletic race, ( starter gun)
Amazing idea
অসাধারণ গল্প। গল্প পড়েতে পড়তে চোখে জল ধরে রাখতে পারলাম না। ধন্যবাদ।
Yeah, real genius wire wheel polishing the square stock handle before you weld it to the gun might’ve been a good idea
Lets see your content.....
Oh, you got nothing but words.
Get a grip boy.
You just go around to content creators and talk smack?? Is that what moves you? Is that fulfilling and edifying in your small (boys) world??
Meanwhile, this MAN is down in the shop, getting his hands dirty, testing new materials in cap gun manufacturing, (bondo)
Using his mind, this MAN has planned and gave us a demonstration of HIS design.
He spends his time USING his tools, gaining insight and practices his trade..
He doesn't ask us for one single thing, does he?
He just puts his work out there for anybody to watch.
I would say he gains by doing this, that he really LEARNS SOMETHING by doing this....
(You, not so much, boy)
Not to mention... He started his youtube channel, he recorded and edited vid... uploaded it, etc
what did you do boy??
You selling?
Good vid man.
New sub here.
Great idea using the bondo!
That gives me several ideas for different projects im doing....
I never thought of using bondo!!
Also, the smack talkers in the comment section are JEALOUS LOSERS.
Please dont pay them any mind...
They shit post all over youtube, cause they dont have the talent or skill to become content creators like you have done ...
Theyre little boys, and sometimes they act like total bullies.. Screw em'!
Ignore em'!
Nice work but, its disappointing that the live ammunition is just a clickbait
What ammunition? What are you speaking about?
Very best and simple I love it
Это же детская игрушка получилась, пистонами стреляет. Красные пистоны в концилярских Максим магазинах продается.
За эту игрушку любой следак статью сразу сконструирует.
con una impresora 3d y esa mano de obra , podrías sacar tu propia marca 🤘
Thank you brother 🎉❤😊
Toller Film kann man bestellen?
Tem as medidas e o projeto?
Por qué no le haces un extractor de municiones directamente del cargador?
Nice work but good luck taking it apart if ever needed 😅
Bon bagay ❤❤❤❤😊
我好想买一套这些工具，放自己的屋子里，玩一年都不腻！
Why are use filler when you could’ve just made a nice wood handle all the way up and over the trigger
Do you speak English too?
Cause he didn't want to..
How bout that?
Make a gun and give us some of this great content that only exists in your lame-brain...
I want this how much price ??
Get a job!
why show the bullet in the intro picture?? and bondo used? really
How to get 5 with the section 5. Take it from one who knows, read that disclaimer at the start very carefully!
O CARO É BOM NO Q FAZ ! ❤
11:35 I think I'm going for a Blood Angels veteran sergeant with mine.
Can u make a video firing the gun at a target
So preciso ver melhor o sistema do gatilho tem como?
Pwede ba ako mag order po nyan
Слишком массивный затвор и ударный механизм для такой игрушки.... Можно придумать и что то по проще..))
why you didnt test it?
Can you make an over-engineered nerf gun?
Specifically, there is a Nerf gun that is similar to this, called the Rifling Swin. It's almost functionally the same as this, with some minor differences.
Thank you
esta puede tener un foco en el ser humano?
My man got the Harbor Freight starter kit
How much