Help fund future builds here: buymeacoffee.com/pcpairgunschannel Every bit helps keep the creativity flowing!🔥Thanks so much for all the support lately! 🙏
Unbelievable patience. Took 6 years to make this not to mention 320 bur bits, 220 drill bits, and 68 files. Great job for hand tools. Definitely a good person to know should an apocalyptic occurrence take place.
the only machine i see in this video is the drill . but this guy have done very beautiful finished rifle . can u imagine if he have a complete machine tool . great job dude . 🎉
Reminded me of times of my youth, you got another sub. I may have built a few similar things back then. I only had very basic hand tools and no internet.
@telingalintah I'm not sure how seriously you intend this lol. A kid named David Hahn built a nuclear reactor in his mother's back yard at age 17. Innovation, and inventiveness is a lot more important than modern tools. The oklo reactor in Africa has been around for at least 1000s of years. Some scientists say it formed by chance, but more credible researchers point out the engineering involved and say there's no chance it was accidental. You cannot keep some innovators down. I do not believe our friend here is a megalomaniac. If he is we better be on his good side lol cause he's obviously willing to put in the work.
We are waiting for more of your good videos. How to make the receiver, its sizes and dimensions, the depth of the drilling, and the method of making the wooden dipstick, final assembly.. Greetings, your follower from Egypt
Perfect Work!!!! Seeing your video, I feel amazed and thank you for sharing this video and success always "PCP ......."....Pekalongan, Central Java, Indonesia
Dude! Nice! I started building one similar....technically I ordered all the stuff I need to do it lol. But very similar idea. I decided to watch urs closer incase of any good ideas to learn from. I'm using a 24 inch crosman barrel with metal breech an suppressor I ordered from (buck rail) that will be here tomorrow, I have a .5 liter air tank setup almost identical to urs. My grip an trigger are coming off a crosman 1322 I ordered that will be here Friday along with the aluminum tubing I ordered. I have an idea that I'm gonna do to try going next level with this. More power, sniper barrel, change caliber to a 223! That includes special 223 rounds out of pure lead. If interested, I'd be happy to share that information with u. The sniper barrel with 223 ammo is easier then everything u just went through, so I have no doubt u can do it lol
@@williamfausett5200 dude, if no bs, I will be happy to see your progress, and possibly follow your successful steps to make my own copy of your masterpiece. From my side all the possible ads to your channel and a massive support 🙏
@@betepbou9723 i honestly don't care about channel support or anything like that, if u make a video that includes anything u got from me, give my name a shout out in the video, just cause its cool lol. But I'm down to share everything I can, just cause helping others is what where all supposed to do. I gotta work (I'm a tattoo artist) but later today ill id be happy to share everything. I can be forgetful, if I don't respond today, please remind me, I'd really like to what u can do with the information I have for ya!
If you unscrew the universal valve Wich will no longer be needed and then make a adapter with 16.1m male threads on one side and on the other side thread it the same as a crossman valve cap it will work as a plenum adapter between the drop block and valve. then you can use crossman part's to build the rest of the air gun 💯🛠️🎯👍✌️🍻🇺🇸
Great work.. Is it possible for you to have a video explaining how to make a black receiver, step by step, please? Your follower is from Egypt. my regards
bubby get a few pieces of steel and some machine screws . make you some ways to hold a peace that would fasten a peace of high-speed steel to it and create a fulcrum point the attaches to the part that slides between the ways i mentioned and put a handle on it and you have way to broach holes put a vice at one end and your days of drilling job like that are over . not to mention your slots will be far more square from Jump Street., you could do te dame then I'm talking with a drill press as well with just with some ground high speed steel . and a work-holding vice to get your lateral movement. all that to save you some time and aggravation guy
Thanks for being golden hearth mind frend more power ilove your job i wanted to have that kind of airgun i hope you can shares to me the details where we can buy the parts so that ican start my own toy god bliss you
with this valve thats not possible. I am currently making a new PCP which will possibly give even 1400 FPS with 16 grain slugs, but that's a very optimistic estimation. The first part is on my channel, making valve and tank
Very impressive to build this without precision machinery (lathe/milling machine etc.). However, I'm a little confused as to the object of building this. How did you come to have all the complex parts are already (valve and breech), especially the breech? Why not just buy a complete gun? If this was just a case of 'I have some parts, let's make the rest of the gun', or, 'just because I can' then I understand. Enlighten me as to why you did this project?
It was for a more customized build and to get more experience building stuff as I am not that experienced yet. I am getting more machinery now and will probably make pretty much all the parts myself in my upcoming videos
@@pcpairgunschannel Well, I'll definitely tune in to see that. Seeing what you can do with just hand tools I think with machines your work will be truly awesome
Pipe and tubing measure differently. I think it's pipe outside diameter and tubing is inside diameter. Make sure you didn't make the mistake of getting tubing and pipe.
the Whole hammer/Trigger assembly can be done with 3d printing..these parts dont need to be aluminum. Too expensive and too much work. The hammer itself needs to be metal obviously. Would have been intersting to see how it does with higher caliber.
I don't recommend buying this one, this is a very expensive chamber and isn't even in production anymore. In The Philippines, you can find many good barrels and chambers from lazada@@johnericksalonga7652
Sorry, I don't know which tubes you are talking about so please specify. About the .50 cal with a magazine, i can't say much about the magazine. You can check how the magazines work and try to create one. The .50 cal pcp is like any other pcp, but just has a valve with larger transfer holes, probably a stronger hammer, and a larger caliber obviously
Bos baka Po may sobra Kang aluminum tube baka pwde mabili kc Po mag DIY din po ako ng katulad ng sayo po wla kc akong Makita sa shapee eg kahit isang dangkal lng e
Help fund future builds here: buymeacoffee.com/pcpairgunschannel
Every bit helps keep the creativity flowing!🔥Thanks so much for all the support lately! 🙏
Do you sell your home made product?
@ sorry
Its not for sale
I love this video its such an inspiration for people who dont want to buy expensive guns and want to have fun building and modifing their own
YES! This is the true definition of "Hand Made"👍👍👍
No tengo palabras ante tanto talento y arte armero, mis más sincera enhorabuena amigo. Una obra realmente artesanal !
Unbelievable patience. Took 6 years to make this not to mention 320 bur bits, 220 drill bits, and 68 files. Great job for hand tools. Definitely a good person to know should an apocalyptic occurrence take place.
the only machine i see in this video is the drill . but this guy have done very beautiful finished rifle . can u imagine if he have a complete machine tool . great job dude . 🎉
Thanks 🤩🤩I plan buying a lathe.
Reminded me of times of my youth, you got another sub. I may have built a few similar things back then. I only had very basic hand tools and no internet.
Someone give this man some machine tools
you give him modern machine tool, he will create an atomic bomb
@telingalintah I'm not sure how seriously you intend this lol. A kid named David Hahn built a nuclear reactor in his mother's back yard at age 17. Innovation, and inventiveness is a lot more important than modern tools. The oklo reactor in Africa has been around for at least 1000s of years. Some scientists say it formed by chance, but more credible researchers point out the engineering involved and say there's no chance it was accidental. You cannot keep some innovators down. I do not believe our friend here is a megalomaniac. If he is we better be on his good side lol cause he's obviously willing to put in the work.
@@leechSensesiii>>ii>ii>ii
😅😅😅😅😅😅😮
so where can i donate $10 to him for tools?
This is a true inspiration. Obviously, nobody told this guy you can't do that that's awesome I love it
尊敬的先生，我佩服你的堅韌，佩服你如今難得一見的手工技藝。然而，看著用旋轉銼刀鑽孔、鑿孔、銼削和挖出的槽，看起來是如此粗糙、尷尬和醜陋。請抓住第一次機會，為自己買一台銑床！
儘管您使用的是漂亮的鋼鋸，但看著您用手切割所有金屬庫存還是非常痛苦的。我感受到了你的痛苦，即使在超雙速幀播放時也是如此。銑床之後您的下一個工具，，，給自己買一把帶鋸！即使是簡單的往復鋸，您也會感激不盡！當然，您可能也想要一台車床...
所以一台銑床、一台帶鋸和一台車床，你就會是金色的，你會像龍一樣金色，金龍。龍年吉祥，龍年吉祥，新年快樂。
做得好！手藝不錯！謝謝你分享你的手藝
Zūnjìng de xiānshēng, wǒ pèifú nǐ de jiānrèn, pèifú nǐ rújīn nándé yījiàn de shǒugōng jìyì. Rán'ér, kànzhe yòng xuánzhuǎn cuòdāo zuǎn kǒng, záo kǒng, cuò xuē hé wā chū de cáo, kàn qǐlái shì rúcǐ cūcāo, gāngà hé chǒulòu. Qǐng zhuā zhù dì yī cì jīhuì, wèi zìjǐ mǎi yī tái xiǎnchuáng!
Jǐnguǎn nín shǐyòng de shì piàoliang de gāng jù, dàn kànzhe nín yòng shǒu qiēgē suǒyǒu jīnshǔ kùcún háishì fēicháng tòngkǔ de. Wǒ gǎnshòu dàole nǐ de tòngkǔ, jíshǐ zài chāo shuāng sù zhèng bòfàng shí yěshì rúcǐ. Xiǎnchuáng zhīhòu nín de xià yīgè gōngjù,,, jǐ zìjǐ mǎi yī bǎ dài jù! Jíshǐ shì jiǎndān de wǎngfù jù, nín yě huì gǎnjī bù jìn! Dāngrán, nín kěnéng yě xiǎng yào yī tái chēchuáng...
Suǒyǐ yī tái xiǎnchuáng, yī tái dài jù hé yī tái chēchuáng, nǐ jiù huì shì jīnsè de, nǐ huì xiàng lóng yīyàng jīnsè, jīnlóng. Lóng nián jíxiáng, lóng nián jíxiáng, xīnnián kuàilè.
Zuò dé hǎo! Shǒuyì bùcuò! Xièxiè nǐ fēnxiǎng nǐ de shǒuyì
先生非常感謝您！ 我實際上剛買了一台迷你車床。 稍後我會買一台銑床，因為在車床上開槽並不是很精確的工作。
For someone with a degree in mechatronics, I have shit in my pants watching his skill
Respect for your patience... very impressive with available tools
what a wobbly vice!
can we start a go fund me to get this guy a god damn angle grinder
I have one now 😂
On top of that I got a mill and a lathe as well.
Ok well now im jealous lol
Absolutely fantastic!! New subscriber here and I love building my own toys. Thank you so much for the information.
Each of us will trade him a machine tool in exchange for a finished gun. 👍
Made me reach for my tool kit, lucky I have a Centre Lathe and drill press!
Sad you dont have such an enthusiasm 😂 as this guy
Nice making airgun Rifle ayos yan boss...
We are waiting for more of your good videos. How to make the receiver, its sizes and dimensions, the depth of the drilling, and the method of making the wooden dipstick, final assembly.. Greetings, your follower from Egypt
Với dụng cụ như vậy mà làm ra được cái quy pcp là quá giỏi rồi
Поражает упорство изобретателя! Ну полный и абсолютный хендмайд! )))
This video is soo needed! thank you!
An automatic center punch and some cobalt drills would make your life better. Well done with limited tools though.
Perfect Work!!!! Seeing your video, I feel amazed and thank you for sharing this video and success always "PCP ......."....Pekalongan, Central Java, Indonesia
Dude! Nice! I started building one similar....technically I ordered all the stuff I need to do it lol. But very similar idea. I decided to watch urs closer incase of any good ideas to learn from. I'm using a 24 inch crosman barrel with metal breech an suppressor I ordered from (buck rail) that will be here tomorrow, I have a .5 liter air tank setup almost identical to urs. My grip an trigger are coming off a crosman 1322 I ordered that will be here Friday along with the aluminum tubing I ordered. I have an idea that I'm gonna do to try going next level with this. More power, sniper barrel, change caliber to a 223! That includes special 223 rounds out of pure lead. If interested, I'd be happy to share that information with u. The sniper barrel with 223 ammo is easier then everything u just went through, so I have no doubt u can do it lol
Interesting, i'd love to see this PCP once you have made it!
@@williamfausett5200 dude, if no bs, I will be happy to see your progress, and possibly follow your successful steps to make my own copy of your masterpiece. From my side all the possible ads to your channel and a massive support 🙏
@@betepbou9723 i honestly don't care about channel support or anything like that, if u make a video that includes anything u got from me, give my name a shout out in the video, just cause its cool lol. But I'm down to share everything I can, just cause helping others is what where all supposed to do. I gotta work (I'm a tattoo artist) but later today ill id be happy to share everything. I can be forgetful, if I don't respond today, please remind me, I'd really like to what u can do with the information I have for ya!
Good job brother.. Nice video. Thank you for sharing.. Love it so much!!
Wow, glad it worked without exploding.
Was that stock attached with zip ties??😱😱
Damn, that’s awesome. Now make one in .50 caliber🤣
maybe one day 👍
Keep up the good work, mate! You more than earned my sub!
I wish i could have 1 for Christmas
If you unscrew the universal valve Wich will no longer be needed and then make a adapter with 16.1m male threads on one side and on the other side thread it the same as a crossman valve cap it will work as a plenum adapter between the drop block and valve. then you can use crossman part's to build the rest of the air gun 💯🛠️🎯👍✌️🍻🇺🇸
Sei bravissimo a creare contenuti! Buona fortuna a te!
🤩👍
Simply OUTSTANDING!👏👏👏👏👏👍👍👍👍👍👍👍👍👍👍
bravo
A true inspiration.
👏👏👏
I looked everywhere but couldn't find a barrel with a bolt and magazine anywhere. I would be very happy if someone would help me
great build well done
Very good analysis.well done
Great work.. Is it possible for you to have a video explaining how to make a black receiver, step by step, please? Your follower is from Egypt. my regards
done na po idol.watching
Vc e o cara muito bom o trabalho parabens laik
❤
Brother thank very now I make airgun thànk véry mutch
Good work, well done.. Can you please explain how to make the black receiver with the sizes and locations of the pipe orings? Greetings from Egypt
Sorry, the receiver isnt homemade. But In my upcoming videos I'll show the making of a receiver
@@pcpairgunschannel I am waiting for the video of the receiver working. Thank you in advance
Where can I find that color black. Upper receiver
Very good friend! Tanks !
Nice idol may idea na ako
bubby get a few pieces of steel and some machine screws . make you some ways to hold a peace that would fasten a peace of high-speed steel to it and create a fulcrum point the attaches to the part that slides between the ways i mentioned and put a handle on it and you have way to broach holes put a vice at one end and your days of drilling job like that are over . not to mention your slots will be far more square from Jump Street., you could do te dame then I'm talking with a drill press as well with just with some ground high speed steel . and a work-holding vice to get your lateral movement. all that to save you some time and aggravation guy
Exelente aporte de video
Good job can i have link for receiver where you buy?
gmaccustomparts.com, i dont recommmend buying it, its discotninued and really expensive.
What price? How much.. link please?
Excellent work
Where did the magazine and the reciever come from?
gmaccustomparts.com
output speed is very good
Good video boi 😎👍
You already know
@@pcpairgunschannel liar
Lass dir zu Weinachten eine Felx (Winkelschleifer) Schenken.... Dann kannst du eine Mondfähre bauen.
Great and inspiring video! Where did you get the magazine? do you know if any brand has trigger systems?
I bought it from gmaccustomparts.com
that site doesn't seem to be very active anymore, so you can search on eBay stuff like "Crosman 2240 breech".
God job sir
That's man is talented I se is pilipino boy
Mantap bang
where can you buy a rifle barrel with the firing pin and the magazine? Thanks
hi friend new subscriber MALAUEG TRIBES AND FISHING TV nice sharing friend.
thanks 👍🙏
Thanks for being golden hearth mind frend more power ilove your job i wanted to have that kind of airgun i hope you can shares to me the details where we can buy the parts so that ican start my own toy god bliss you
the links are in description
Please add more power which gives 1250 FPS on 16 Grain .177 Pellets or Slugs
with this valve thats not possible. I am currently making a new PCP which will possibly give even 1400 FPS with 16 grain slugs, but that's a very optimistic estimation. The first part is on my channel, making valve and tank
@@pcpairgunschannel I watched all of your eight videos. 👍
Wow ❤ subs. Thank you.
Can i get a simple sketch drawing for making your homemade chamber and trigger..
sorry, I have no plans of this.
대단합니다. 혹시 총신은 어디서 구매했는지 알수있을까요?
안녕하세요. gmaccustomparts.com에서 구입했습니다. 24인치(60cm) 크로스만 총신입니다. 해당 사이트는 더 이상 활성화되지 않습니다. 총신을 구매하려면 Google에서 검색하거나 총신을 직접 만드는 방법에 대한 최신 동영상을 시청하세요.
I would like the plans on how you made it
They are literally in the video!😂
Hi mate I'm in Australia how much would you charge to make all the parts and send to me in pieces I will assemble it
i will face legal issues sending it, i cant send it
Hi do you have whatsapp
Very impressive to build this without precision machinery (lathe/milling machine etc.). However, I'm a little confused as to the object of building this. How did you come to have all the complex parts are already (valve and breech), especially the breech? Why not just buy a complete gun? If this was just a case of 'I have some parts, let's make the rest of the gun', or, 'just because I can' then I understand. Enlighten me as to why you did this project?
It was for a more customized build and to get more experience building stuff as I am not that experienced yet. I am getting more machinery now and will probably make pretty much all the parts myself in my upcoming videos
@@pcpairgunschannel Well, I'll definitely tune in to see that. Seeing what you can do with just hand tools I think with machines your work will be truly awesome
I bought all the exact parts the aluminum tube sizes are incorect
@@joshfoster9785 from TRPNZ store on AliExpress?
Pipe and tubing measure differently. I think it's pipe outside diameter and tubing is inside diameter. Make sure you didn't make the mistake of getting tubing and pipe.
nice man. how long is the distance range?
@@prudencejremnil7406 I am not sure, it will probably shoot good up to 50-100 yards
Sir pwedi bang de bumba na air gun combert sa co2 air gun?
GRACIAS GRACIAS GRACIAS
the Whole hammer/Trigger assembly can be done with 3d printing..these parts dont need to be aluminum. Too expensive and too much work. The hammer itself needs to be metal obviously. Would have been intersting to see how it does with higher caliber.
Amazing
လိုချင်တယ်
Nonton mas 🙏 hadir
Testing you air gun sir I want to see how far you air gun can get a point sir
Awesome...what is the barrel set sir ??
crosman 2240 barrel
@@pcpairgunschannel where I can buy that sir barrel with chamber only I'm from Philippines
I don't recommend buying this one, this is a very expensive chamber and isn't even in production anymore. In The Philippines, you can find many good barrels and chambers from lazada@@johnericksalonga7652
@@pcpairgunschannel really ?? What barrel and chamber can buy to lazada
many unbranded ones, just search pcp chamber and you'll find many.@@johnericksalonga7652
What is the price for cylinder to fit in px100
it wont fit it
ไม่ทราบว่าปืนอัดแก๊สนี้ราคาแพงไหมครับ แล้วหาซื้อได้ที่ไหนบ้างครับ
Among haba Ng pellet pusher?
Good
สุดยอดเลยครับ
Saan po nabili Yung upper receiver. Yung kulang balck
God tanks👏👏👏👏👏❤️
How can i get that barrel and chamber part?
its from gmaccustomparts.com, but its out of stock now
Cool
Mantap 👍🐿️
can you make a semi auto version?
Very good video, excellent skills and ingenuity, fair play, all the best
Niceee and yes I subscribed 🇳🇱😉👍
Thanks for the sub!
Hi! May I ask, how did you ensure that the tubes would telescope and do you have advice for making a .50 cal pcp air rifle with a magazine?
Sorry, I don't know which tubes you are talking about so please specify.
About the .50 cal with a magazine, i can't say much about the magazine. You can check how the magazines work and try to create one. The .50 cal pcp is like any other pcp, but just has a valve with larger transfer holes, probably a stronger hammer, and a larger caliber obviously
Super❤
what is the name of mgazine holder? thnks
.177 Marauder Magazine
Bos baka Po may sobra Kang aluminum tube baka pwde mabili kc Po mag DIY din po ako ng katulad ng sayo po wla kc akong Makita sa shapee eg kahit isang dangkal lng e
I want by this..do you have to sale?
can't sell
From where you purchased the reciever ?
If you selling i can contact you ?
i cant sell, but its from gmaccustomparts.com
Pls where can i buy that upper receiver
gmaccustomparts.com, seems to not be available anymore.
@pcpairgunschannel is there any working alternative?
A Pura set kitne Ka hai
Is it gonna shoot through tissue paper?
How many sheets
I want to buy 1 very much from many years so how do i buy...humble request Please
Sorry... I can't ship it legally