La verdad , entendi parte de lo que seguramente , este chico trato de hacernos entender a full ,,, pero bueno la cuestion del idioma nos hace que tengamos estas dificultades , de todas maneras me gusto y mucho el video .. Saludos desde argentina ....
Hi again and thanks for replying... I also have Makita MLT100 and will be replacing the Rip Fence and have purchased an UPGRADE KIT made BY Sherwood that provides 2 new rails and a very solid fence that is well braced and also a hook at the top to go under the rail to hopefully minimize flexing. (it was not cheap at Aust$225 but I hope that rectifies the problem) I am also going to make a crosscut sled to eliminate the rattle in the table tracks and I am going to chuck the poorly designed sliding tray on the left and just use the sled and I am going to make flap up tables for the top and the right hand side.
Michael Dillon Good idea to lose the sliding table. It's a terrible design. I ditched mine about 20 minutes after I got the saw! Can you please post a link to the rip fence upgrade kit you mentioned. I can't find anything online for it. I would be interested to see one. Cheers Jon
nice did the same but when i cut the sled the first time it was over a mm thicker than the blade. that's how much of set the blade is.also had to machine the blade retainer to fix blade runout. good luck with your project as i have given up trying to tune it. i just use it for rough cuts now if at all. i noticed he use another saw do build the fence that may tell you something
Hello, I really need a new face plate for this Makita table saw. I am very frustrated with this table saw. I am about to buy HARVEY, but still wanted to keep Makita for doing mobile works. How much is your face plate? Thank you and have a great day.
must be very bad saw if you go to another saw to do the work. so fence is god but how do you get the blade in line with the miter slots (t-slots) very dangerous when not lined up
You didn´t imagine, that people of all the world, could see your video. Well.....that hapenned. I´m from Cordoba, Argentina, and, image is very simple and show all, but, a translations could be great. If you can, thanks a lot.
I think Makita mlt 100 is one of the worst table saw. It does not worth its price. Fence, sliding system, slots, plates all have problems and bad design. Need too much modifications. I saw many cheaper machines have better than this machine. I am personally not recommend this machine. This is shame of makita.....
น่าจะปิดแผ่นด้านบนตลอดความยาวของรั้วนะครับน่าจะแข็งขึ้น mdfมันรับแรงกระทำจากด้านข้างไม่ค่อยได้
ผมอยากได้แผ่นครอบกับriving knive ทำขายมั้ย อยากรู้ราคา สั่งทำได้มั้ย
Ps, es-c la même hauteur que le guide en metal pour le contre- plaque ?
Ha sido excelente; el video, la guía y la explicación.....
Perfecto.
สอบถามหน่อยครับ ถ้าจะทำงาน diy เฟอร์นิเจอร์ โต๊ะเลื่อยนี่จำเป็นมั้ยครับ
La verdad , entendi parte de lo que seguramente , este chico trato de hacernos entender a full ,,, pero bueno la cuestion del idioma nos hace que tengamos estas dificultades , de todas maneras me gusto y mucho el video .. Saludos desde argentina ....
Hi again and thanks for replying... I also have Makita MLT100 and will be replacing the Rip Fence and have purchased an UPGRADE KIT made BY Sherwood that provides 2 new rails and a very solid fence that is well braced and also a hook at the top to go under the rail to hopefully minimize flexing. (it was not cheap at Aust$225 but I hope that rectifies the problem) I am also going to make a crosscut sled to eliminate the rattle in the table tracks and I am going to chuck the poorly designed sliding tray on the left and just use the sled and I am going to make flap up tables for the top and the right hand side.
wooow
I'd love to see that!
Michael Dillon Good idea to lose the sliding table. It's a terrible design. I ditched mine about 20 minutes after I got the saw!
Can you please post a link to the rip fence upgrade kit you mentioned. I can't find anything online for it. I would be interested to see one.
Cheers
Jon
nice did the same but when i cut the sled the first time it was over a mm thicker than the blade. that's how much of set the blade is.also had to machine the blade retainer to fix blade runout. good luck with your project as i have given up trying to tune it. i just use it for rough cuts now if at all. i noticed he use another saw do build the fence that may tell you something
สนใจเพลทสแตนเลส ตกลงว่าทำขายรึป่าวครับ
ผมก็สนใจเพลทกับriving kinve
หน้ากากที่คุณใส่ รุ่นไหนครับ ขอสเปคผมด้วยครับ
มีประโยชน์มากค่ะ ขอราคาเครื่องด้วยจะดีมากๆเลย
where did you buy the table saw insert? thanks
Seems logical. Whatever you say I agree with you
Hello, I really need a new face plate for this Makita table saw. I am very frustrated with this table saw. I am about to buy HARVEY, but still wanted to keep Makita for doing mobile works. How much is your face plate? Thank you and have a great day.
Круто. Просто и доходчиво!
Спасибо!
Better this or cabinet saw nototec?!
Bonjour, pourquoi avez-vous doublé la partie du guide merci?
must be very bad saw if you go to another saw to do the work. so fence is god but how do you get the blade in line with the miter slots (t-slots) very dangerous when not lined up
How can I get this in USA California?
No entiendo nada de lo que habla se explicó muy bien
Con las imagines
Muchas gracias
You didn´t imagine, that people of all the world, could see your video. Well.....that hapenned. I´m from Cordoba, Argentina, and, image is very simple and show all, but, a translations could be great. If you can, thanks a lot.
Hi,
Shame you could not add English sub titles for what you did looks interesting but as you did a lot of talking most of your points were lost.
Hi
Thanks for the comment.
I'll try to add English sub titles soon.
@@Pluem_Meplus I could tell what you were doing and why. it was very clear to this english speaker. great job!
เท่าไหร่อะพี่ตัวนี้
Perfekt
ขอชื่นชมครับ
+Rshawin Boon ขอบคุณครับ
Автор, может я и не уловил чего то не зная речи. Однако то что делается ясно показано и потому понятно.
Удачи Вам.
painting it might be a bad idea, it could transfer to the work piece
Guys STOP PUTTING titles in English but you speak in a foreign language is misleading. All the best to everyone !
Коля, они на нас не рассчитывали. Но красиво подает, молодец!
Thank you for watching!
I'm so sorry that I only speak Thai.
good idea, boy
Все очень понятно, палец вверх!
merci :Q)
Pone subtitulos en español no seas mala onds
интересно, но нихрена не понятно что говоришь.
I think Makita mlt 100 is one of the worst table saw. It does not worth its price. Fence, sliding system, slots, plates all have problems and bad design. Need too much modifications. I saw many cheaper machines have better than this machine. I am personally not recommend this machine. This is shame of makita.....
kapun ka
О. 0000000000.не годни станок.
มันผิดกฏหมายปร่าว แท่นเลื่อย