Electric Geyser service | Salt cleaning & rewiring | गीजर की नस - नस की जानकारी

Поділитися
Вставка
  • Опубліковано 27 лис 2024

КОМЕНТАРІ • 335

  • @akashshah1080
    @akashshah1080 Рік тому +17

    Thanks a lot. I was able to reset my geyser after watching your video 🙂

  • @pramodranjan5108
    @pramodranjan5108 Рік тому +7

    बहुत अछे से आपने described किया और educational video bhee दिखाया apkey समझाने का तरीका बहुत अच्छा है...... आपको धन्यवाद.

  • @nandiniyadav1917
    @nandiniyadav1917 9 місяців тому +3

    Yah video Maine Aaj Dekhi 2024 mein jo ki mere ghar ka geyser chal to raha tha per usne Pani Nahin a raha tha bilkul bhi yah video dekhne ke bad Jaisa ismein bataya Gaya Vaisa Kiya To vah chalne Lag Gaye aur Pani bhi a Gaya garm Pani a Raha Hai Ab To thank you so much sir😊😊😊

    • @ShishuTechno
      @ShishuTechno  9 місяців тому +1

      Thanks for your comments and compliments.

  • @jiteshjangid6759
    @jiteshjangid6759 Рік тому +2

    Shandaar video sir.
    Hats off to you..🙏🙏🙏
    Aj pata chala school mei padha hua ohm's law actually kaam ata hai.
    Keep up the good work.

  • @vinodchaudhari211
    @vinodchaudhari211 11 місяців тому +4

    वायर और थर्मोस्टेट जोडनेका चित्र दिखानेसे आसानीसे समझ में आया।

    • @ShishuTechno
      @ShishuTechno  11 місяців тому +2

      धन्यवाद 🙏

  • @syedsayeedurrahmanzaini4221
    @syedsayeedurrahmanzaini4221 2 роки тому +5

    Very well explained. You have indepth knowledge of appliances . Thanks for explaining everything in detail. Best regards

    • @ShishuTechno
      @ShishuTechno  2 роки тому +1

      Thank you very much for your compliments and motivating us.

  • @koolboy347
    @koolboy347 10 днів тому +1

    Bohot accha explain kiya aapne sirji. Thank you very much

    • @ShishuTechno
      @ShishuTechno  10 днів тому +2

      @@koolboy347 thanks for watching and for your compliments.

  • @प्रानुभव
    @प्रानुभव Місяць тому +1

    Thank you apki bajah se mera geyser thik ho gya

    • @ShishuTechno
      @ShishuTechno  Місяць тому +1

      @@प्रानुभव हमें ख़ुशी है, हमारा वीडियो आपके काम आया।

  • @rdr.what-matters-to-me
    @rdr.what-matters-to-me Рік тому +2

    very well put together and informative video. High quality, to-the-point, no-BS, non-cringe, non-narcisstic and useful content.

    • @ShishuTechno
      @ShishuTechno  Рік тому +1

      Thanks a lot for your compliments 🙏

  • @abhiharshbbc9917
    @abhiharshbbc9917 23 дні тому +1

    Maza aa gya bhai kya samjhate ho

  • @navkishore2665
    @navkishore2665 2 роки тому +2

    बहुत बढ़िया जानकारी दी आपने। धन्यवाद।

    • @ShishuTechno
      @ShishuTechno  2 роки тому +1

      धन्यवाद सर 🙏😊

  • @RoyalMirzaji-hu7ce
    @RoyalMirzaji-hu7ce 11 місяців тому +1

    Bohot accha samjhya aapne Bhai ❤️👌

  • @ramj.k7957
    @ramj.k7957 Рік тому +1

    Bahut acche se samjhaya aap ne 👍👍

  • @sreenivasannadasu
    @sreenivasannadasu Рік тому +2

    Very very very very very nice explanation.

  • @RamnathDangui-qq1tj
    @RamnathDangui-qq1tj 9 місяців тому +2

    geyser lick honepar kaisa repair jar sakte hsi?

  • @gauravkr4760
    @gauravkr4760 Рік тому +1

    Such a knowledgeable person you r... God bless

  • @pushkarbisht4563
    @pushkarbisht4563 2 роки тому +1

    बहुत अच्छी जानकारी दी है आप ने बहुत बहुत धन्यवाद..

  • @artlajawab7611
    @artlajawab7611 8 місяців тому +1

    Very nice tutorial thanks for sharing this video
    mein bhi try karungi insha Allah #ArtLajawab

    • @ShishuTechno
      @ShishuTechno  8 місяців тому +2

      Shukriya Hausla afzai ke liye

  • @j.d.soundarrajan3761
    @j.d.soundarrajan3761 Рік тому +1

    Excellent explanation and demonstration. Clear circuit diagram. Thank you very much.

  • @ajaychebbi
    @ajaychebbi 2 роки тому +6

    Very nice! So much hard water salts on the inside 😱

    • @ShishuTechno
      @ShishuTechno  2 роки тому

      Thanks for watching and your compliments. Thank you!

  • @nexthacker007
    @nexthacker007 2 роки тому +2

    Great, Never seen such expaination in indian video.

  • @gauravsethi4867
    @gauravsethi4867 3 місяці тому +1

    very well explained... you delivered the content so clear, it is really helpful video

    • @ShishuTechno
      @ShishuTechno  3 місяці тому

      Thanks a lot for your compliments

  • @gsrinivas1554
    @gsrinivas1554 2 роки тому +5

    Good explanation with diagram.😃

    • @ShishuTechno
      @ShishuTechno  2 роки тому +1

      Thank you srini for your compliments 🙂

  • @K_____ING0917
    @K_____ING0917 Рік тому +1

    Bhai Saheb aap ka naam to naheen maloom lekin hum log aap ka naam Shishu Saheb samajh rahe hain. Aap to technician naheen hain lekin "Nothing is impossible to a willing mind"
    Allah se dua hai ke aap ke jayaz maqasid poore karre. Aamee.
    Very nice informative video and good explained. Once again thanks Sir.

    • @ShishuTechno
      @ShishuTechno  Рік тому +1

      Hausla afzai ke liye bohat bohat shukriya bhai jaan, aapka andaaza ekdum sahi hai, mera naam shishu hai. Main ek electronics engineer hoon. Main apne ghar ke sabhi saaman khud hi durust karta hoon. kharaab cheezon ko durust karna mera shauk hai. Allah aapke jaise nekdil insan ko hamesha salaamat rakhe.

  • @Bharti-d8b
    @Bharti-d8b 2 дні тому +2

    Thak you sir

  • @ayushkumaryadav9773
    @ayushkumaryadav9773 Рік тому +1

    Jio sher tu t bahut sahi se bataye ho

  • @PiyaliMondal-s6k
    @PiyaliMondal-s6k 14 днів тому +2

    Resistence nikal ne ke liye Apne watt/voltage ka formula use Kiya Lekin kisi ,
    2000/240 =28 ohom nhi nikal raha,plse replay sir
    Wase video apka bahaut accha hay 🎉

    • @ShishuTechno
      @ShishuTechno  14 днів тому +2

      Thank you for watchning. Resistance ka detail derivation iss tarah se hai.
      Since, P = V × I (the most common formula for Ohm's law power calculation)
      so, P = V²/R
      so, R = V²/P
      so, for 240V and 2000W we get
      R = V²/P=240²/2000=28.8 Ohm
      sahi laga ho to iss comment ko like de dijiy😇

    • @PiyaliMondal-s6k
      @PiyaliMondal-s6k 13 днів тому +1

      @@ShishuTechno Yes sir
      Ab Nikla,
      ,,👍👍🙏🙏🙏🙏💅

  • @asoorimaringantimuralidhar5185
    @asoorimaringantimuralidhar5185 Місяць тому +1

    Excellent 👍 covered all minute points....

    • @ShishuTechno
      @ShishuTechno  Місяць тому +1

      @@asoorimaringantimuralidhar5185 Thanks a lot for watching and positive comments.

  • @gurmeetsingh1640
    @gurmeetsingh1640 9 місяців тому +1

    God bless your knowledge of experience in future 🙏🎉🎉🎉

  • @talwindersinghbhagtana2526
    @talwindersinghbhagtana2526 11 місяців тому +1

    Very good knowledge for engineer

  • @SudeshKumar-mx4em
    @SudeshKumar-mx4em 6 місяців тому +1

    Thank you so much for detailed information
    God bless you sir

    • @ShishuTechno
      @ShishuTechno  6 місяців тому +1

      Thank you for your compliments.

  • @doonscottishacademy9205
    @doonscottishacademy9205 2 роки тому +1

    Very nicely explained with diagram.well done.👍🙏

  • @sandipchoudhari5660
    @sandipchoudhari5660 Рік тому +1

    I'm technician from pune good video 👍

  • @mmrao121
    @mmrao121 11 місяців тому +1

    very very nice explanation.Thankyou very much Sir

    • @ShishuTechno
      @ShishuTechno  11 місяців тому

      Thank you for your compliments

  • @shwetadev8964
    @shwetadev8964 2 роки тому +2

    Good presentation with diagram.

  • @AP87045
    @AP87045 Рік тому +1

    सुंदर जानकारी प्राप्ति

  • @hemantch.9985
    @hemantch.9985 Місяць тому +1

    Watching 2024 very useful video

    • @ShishuTechno
      @ShishuTechno  Місяць тому +1

      @@hemantch.9985 thank you for watching and your support

  • @Bhaktimarg_raas
    @Bhaktimarg_raas Рік тому +2

    Good knowledge bhai👍

  • @ThebipinJH07
    @ThebipinJH07 11 місяців тому +1

    बहुत अच्छा से आपने बताया

    • @ShishuTechno
      @ShishuTechno  11 місяців тому

      Dhanyavaad hamaara hausla badhaane ke liye. 🙏

  • @iamkirankumarkv
    @iamkirankumarkv Рік тому +1

    best explanation we can get. thanks

  • @sactara
    @sactara Рік тому +1

    Superb explanation. Thank you Sir.

  • @Roopendrakumar
    @Roopendrakumar Рік тому +1

    Explained well. Thanks

  • @musafirmomin9540
    @musafirmomin9540 2 роки тому +1

    Very clear explanation 👌

    • @ShishuTechno
      @ShishuTechno  2 роки тому +1

      Glad you liked it, Thank you 🙂

  • @BalajiGopselConcepts
    @BalajiGopselConcepts 2 дні тому +1

    Why don't you replace that sacrificing anode in heating coil setup???

    • @ShishuTechno
      @ShishuTechno  День тому +1

      Thanks for suggestions. The Sacrificial anode was not much corroded. Yet I should have described it. Thank you very much.

  • @abckol44
    @abckol44 Рік тому +1

    very briefly explained

  • @sunilupadhyay8270
    @sunilupadhyay8270 Рік тому +1

    Very good information.

  • @chandramanimane5184
    @chandramanimane5184 8 місяців тому +1

    bahut khoob.

  • @RameshPatel-ph3ie
    @RameshPatel-ph3ie 2 роки тому +2

    Excellent demo

  • @siddiquiusman5697
    @siddiquiusman5697 Рік тому +1

    Very good explanation thanks

  • @techvsood
    @techvsood Рік тому +1

    Very good explanation 💯👍👍

  • @786KASHMIR14M
    @786KASHMIR14M 10 місяців тому +1

    Very well explained

    • @ShishuTechno
      @ShishuTechno  10 місяців тому +1

      Thank you for your compliments 🙏

  • @gk101417
    @gk101417 4 місяці тому +1

    Thanks sir very informative video. Sir mere pass AO Smith ka ३ltr ka ४ साल पुराणा gyser hai. Jisme Pressure valve लगाया हुआ हैं. लेकीन पिछले कुछ dino से उसके inlet pipe se garam paani return aa raha hai. Kya karu?

    • @ShishuTechno
      @ShishuTechno  4 місяці тому +2

      धन्यवाद, इनलेट पाइप से गर्म पानी return आ रहा है तो , तुरंत गीजर का use बंद कर दीजिये. आपको 2 checks करने हैं .
      1. थर्मोस्टेट फेल तो नहीं हो गया है, मतलब पानी ओवर हीट तो नहीं हो रहा. कुछ देर गर्म होने के बाद अगर हीटिंग कट नहीं हो रहा तो थर्मोस्टेट फ़ैल है. ऐसे में तुरंत ठीक कराएं.
      2 . मल्टिफंक्शन सेफ्टी वाल्व खराब होगा तो भी, हॉट वाटर return आएगा .

    • @gk101417
      @gk101417 4 місяці тому

      @@ShishuTechno thanks how to check thermostat and auto cutter

    • @ShishuTechno
      @ShishuTechno  4 місяці тому

      @@gk101417 thermostat ka hi kaam hai overheat hone pe autocut karna. Agar apke geyser ka paani bahot jyada garm ho raha hai to thermostat kharaab ho gya hoga. Aur geyser pe do indicator hote hain, paani thanda rahne pe dono indicator on rahenge, but paani garm ho jaane ke baad ek indicator off ho jana chahiye. Otherwise thermostat kharab hoga. Aapko jyada idea na lage to technician bulwa lijiye.

    • @gk101417
      @gk101417 4 місяці тому +1

      @@ShishuTechno Thermostat check Kiya hai. Ok hai. Kaam kar raha hai. May be uska pressure valve change karke dekhata hu

    • @ShishuTechno
      @ShishuTechno  4 місяці тому

      @@gk101417 shayad pressure valve / multifunction valve kharaab lag raha hai

  • @AjaibSingh-z6n
    @AjaibSingh-z6n Місяць тому +1

    Jo manual thermostat hai ( Lazer geyser mein laga hai ) is ko kaise change,repair karna hai

    • @ShishuTechno
      @ShishuTechno  Місяць тому +2

      @@AjaibSingh-z6n lazer ka kaun sa model hai aapka aur kitne litre ka hai. Waise manual thermostat normally uska knob khol ke fir bottom wala chhota cover khol ke fir thermostat screwdriver se open ho jata hai. Jaise maine video mein kiya hai.

  • @Hastehasteaste
    @Hastehasteaste 10 місяців тому +1

    Bhi bajaj 25l gyser kam nahi kar raha h November 2022 me liye the iska waranty kitna months ki milti h

    • @ShishuTechno
      @ShishuTechno  10 місяців тому +1

      Aapka geyser warranty mein hona chahiye. . Warranty manual mein dekh lijiye, waise normally 2 saal electric part pe aur 3 saal tank part pe warranty rhti he.

    • @Hastehasteaste
      @Hastehasteaste 10 місяців тому +1

      @@ShishuTechno ok sukriya 🥰

  • @001vgupta
    @001vgupta 2 роки тому +1

    Very nicely explained.

    • @ShishuTechno
      @ShishuTechno  2 роки тому

      Thank you sir for your compliments

  • @solutionworld2510
    @solutionworld2510 7 місяців тому +1

    Humare paas same geyser hai, uski service k baad jo side me steam wali nozzel se steam niklti hai vo lock ho geyi hai aur vo paani geyser k bottoom se niklne lga hai uska solution kya hoga

  • @bhoopendrakushwaha7967
    @bhoopendrakushwaha7967 Рік тому +1

    Very nice explanation

  • @naiiemkhan7046
    @naiiemkhan7046 10 місяців тому +1

    inlet pipe k andar salt blockege karde usko kaise saaf kare batae plz

    • @ShishuTechno
      @ShishuTechno  10 місяців тому

      Valve ko alag karke, Kisi patle rod ke help se blockage open ho jayega.

  • @parthmalhotra9957
    @parthmalhotra9957 20 днів тому +1

    Mereko ek question hai k jaise ab humne geyser srdiyo mai chalna shuru kra hai 2-3 dino se toh usmese garam pani k sath sath kala kala rng ka chunks and dust type arhi hai aise kyu h ...?

    • @ShishuTechno
      @ShishuTechno  19 днів тому

      Aapke geyser mein dirt deposit hai. Usko flush kar dijye. Flush karne ka video mere channel pe hai. Other waise 3-4 bucket pani jeyser se flow karwa dije tap ke through.

  • @michaeldaruwalla8717
    @michaeldaruwalla8717 2 роки тому

    Good clarity,and we'll presented.

  • @iambiplab9411
    @iambiplab9411 15 днів тому +1

    Service cost kitna lagta hai sir .. mere iha ek technician bol rha 450 rs ka liquid + 400 labour . Kya ye sahi hai ??

    • @ShishuTechno
      @ShishuTechno  12 днів тому +1

      Rate lagbhag sahi hai. Liquid ka thoda jyada lag raha hai. Agar jyada old geyser nahi hai to liquid service nahi karaye. 3-4 saal se jyada ho gya hai tabhi liquid service karaye.

  • @avimango46
    @avimango46 15 днів тому +2

    रष्ट रिमूवर का ब्रांड क्या है?

  • @shailabhbhatnagar89
    @shailabhbhatnagar89 Рік тому +1

    2 kw ke geyser me element change kar k 3kw ka element laga sakte hai

    • @ShishuTechno
      @ShishuTechno  Рік тому +1

      Jitne watt ka originally laga ho utne hi watt ka lagayen, element ka wattage geyser ke tank ke size ke according vary hota hai.

  • @rajeshkharyal4898
    @rajeshkharyal4898 5 місяців тому +1

    Well explained

  • @brijeshchindaliya3472
    @brijeshchindaliya3472 2 роки тому +4

    Very Very nice explanation with diagram thanks

    • @ShishuTechno
      @ShishuTechno  2 роки тому +1

      Thank you Brijesh ji. Thanks for watching.

    • @gizmo141284
      @gizmo141284 2 роки тому +1

      sahi min nas nas ki jankaari

    • @ShishuTechno
      @ShishuTechno  2 роки тому

      Thanku @@gizmo141284

  • @srikumarmukherjee5490
    @srikumarmukherjee5490 5 місяців тому +1

    Sir, my geysers power on Red light is off but heat light green is on, and heating is normal, and hot water is coming normally. Is it s problem and I have to connect with a technical support. Please help. Thanks

    • @ShishuTechno
      @ShishuTechno  5 місяців тому +1

      In this case most of the time, the indicator becomes faulty. If the geyser is in warranty, then service support may be requested. If not in warranty and if heating and thermostat operations are ok then nothing to worry about. Thanks for watching🙏

  • @rajendravhanakaware5299
    @rajendravhanakaware5299 10 місяців тому +1

    exexexcellent sir🙏🙏

  • @mdesrarulhaque8399
    @mdesrarulhaque8399 Рік тому +1

    Inlet pipe se bhi hot water nikle toh Kiya Karen?

    • @ShishuTechno
      @ShishuTechno  Рік тому +1

      Multi function safely valve kharaab hai. Change kar dijiye

  • @JoaKazing
    @JoaKazing 8 місяців тому +1

    helpful 👍

  • @satannub
    @satannub 2 роки тому +1

    Ky geyser blast hota h ager ose chalo kar k choor diya jaaye toh jada der tak

    • @ShishuTechno
      @ShishuTechno  2 роки тому +1

      Agar geyser kharaab na ho to kabhi blast nahi hoga. But agar dono thermostat kharab honge aur safety valve bhi kharaab hoga to geyser blast ho sakta hai.

  • @zakiuddin3839
    @zakiuddin3839 2 роки тому +2

    Can electric current flow through water in homes if water heater is faulty

    • @ShishuTechno
      @ShishuTechno  2 роки тому

      Yes in case of a severe fault in heater, current can flow through tap and wet walls. But if the earthing connection (third pin connection) is proper up to the earthing or grounding pit then the shock will not be that severe. So keep the earthing circuit always in a healthy condition. If possible please switch off the geyser while bathing.

  • @brijeshgupta2956
    @brijeshgupta2956 18 днів тому +1

    mera geyser 2 saal purana hai, aur achha kaam kr rha hai, hmlog sirf winter me use karte hain , kya usse servicing ki jarurat hai, kya hme yearly servicing krana chahiye. 500 rs lag rhe hain servicing ke , aap guide kijiye

    • @ShishuTechno
      @ShishuTechno  18 днів тому +2

      Ek baar product ka manual refer karen. Manual mein servicing scedule mention rahta hai. Generally per yr 2 baar service karni hoti hai. only winter mein use karte hain to winter start hone ke time jaroor kara lijiye. Agar aapke area mein hard water ya impuritirs jyada hai to per year 2 baar karna padega.

    • @brijeshgupta2956
      @brijeshgupta2956 18 днів тому +1

      @ShishuTechno Dhanyawad Sir ji

  • @rajrai8073
    @rajrai8073 2 роки тому +2

    Is it safe to wet the geyser’s temperature control knob/ switch fitted outside the cover? I’m asking because you also washed the tank wetting it

    • @ShishuTechno
      @ShishuTechno  2 роки тому +1

      If not applied pressure washer, then it is safe. You may remove outer knob to dry the control quickly. You may also apply air blower for instant dry.

    • @rajrai8073
      @rajrai8073 2 роки тому +1

      @@ShishuTechno thanks for your information. It’s very useful knowledge. Please post more videos, also about how to clean other types of geysers such as square box-type ones that have everything enclosed within.

    • @ShishuTechno
      @ShishuTechno  2 роки тому +1

      ​@@rajrai8073 Thanks for your valuable comments, I will upload such videos in future,

  • @sheshagiriswamy9439
    @sheshagiriswamy9439 Рік тому +1

    How to recaganise to connection nutral & phase in three plug

    • @ShishuTechno
      @ShishuTechno  Рік тому +1

      On every three pin Top L, N, E is marked .
      Otherwise by the color of wire green is earth. Red live, black or brown neutral

  • @paramjeetsingh247
    @paramjeetsingh247 Рік тому +1

    Thanks a lot for good knowledge ❤

  • @nandiniyadav1917
    @nandiniyadav1917 9 місяців тому +1

    Thanks you 😊

  • @yashwantsinghpanwar722
    @yashwantsinghpanwar722 Рік тому +1

    Nic video.

  • @nandumeshram4656
    @nandumeshram4656 Рік тому +1

    पाणी गरम हुवा कैसे समझे
    कोणसी light off होती है गरम होणे pe

    • @ShishuTechno
      @ShishuTechno  Рік тому +3

      जिस लैंप पे heater on likha है । Normally green वाला होता है। Heater on वाला लैंप अगर हीटिंग के time ऑफ हो जाए तो समझीये की पानी गर्म हो गया। पूछने के लिए thank you.

  • @gstsolutions4474
    @gstsolutions4474 2 роки тому +1

    Sir i need to knoe how to remove inner storage tank in Crompton Arno Neo 15 Ltr geyser. Kindly explain

    • @ShishuTechno
      @ShishuTechno  2 роки тому +2

      Sorry sir, I haven't opened yet, I will try that and will upload video very soon. Meanwhile you can try from three bottom holes or from top cover. But I'm not sure.

  • @sinless5315
    @sinless5315 Рік тому

    Sir my bajaj majesty 25 litre is leaking ...maiaany gaskit change kar k market se 2 new gasket purcahse kar k ek ek gaskit se test kiya par uski baad bhe water on kartay he uska nuto se paani aanay lagta hai....what is the problem kya mere tank kahi se likage.hai....kya. tank repair yaani welding etc. ho jaati hai..
    Ya phir naya tank he lena parta hai...
    or naya kitnay tak aajayega...
    Model is bajaj majesty WH 25 gmv
    Type : closed
    2.0 kwatt
    Plz guide

    • @ShishuTechno
      @ShishuTechno  Рік тому

      Agar high rise apartment mein rahte hai to, shayad tank puncture hone ke chances jyada hain. Tank ki normally 5 yr ki warranty rehti hai. Aap ek baar warranty check kar lijiye. Agar gasket change ke baad bhi leak hai to tank ka hi doubt hai. Tank gas welding se thik ho jaati hai.

  • @DeepakSharma-mf1hl
    @DeepakSharma-mf1hl 2 роки тому +1

    good information

  • @aniruddh369
    @aniruddh369 Рік тому

    Very Good explanation. But Mera ek problem hain Green light nahi jal rhi hain , red jal rha hain aur garam bhi ho rha hain . Kabhi kabhi halka halka karke green jalta hain .. Multimeter se check Kiya toh live aur neutral ke beech 28ohms aa rha hain( 2000watt) . Problem kya ho sakta hain ?? Green light kharap ta aur kuch ??

    • @ShishuTechno
      @ShishuTechno  Рік тому +1

      Geyser mein indicator ke liye normally neon lamp use karte hain, indicator ke andar ek resistance bhi laga rahta hai. Neon lamp aur resistance ke connection mein corrosion aa gya hoga. Indicator ki circuit and connection ko check kar lijiye.

  • @CoolBoyy_907
    @CoolBoyy_907 4 місяці тому +2

    गीजर में पानी का कैप्सूल lose है, टाइट कैसे करें जिससे वो नीचे ना गिरे

    • @ShishuTechno
      @ShishuTechno  4 місяці тому +2

      अगर बाहर वाला casing सही है तो अंदर वाला टैंक नहीं गिरेगा। अगर अंदर वाला टैंक लूज़ है तो मतलब बीच का insulation मिसिंग या खराब हो गया है। अगर insulation मिसिंग है तो glasswool भरना पड़ता है। Glasswool को स्किन के संपर्क में न आने दें। बाहरी केस को अच्छे से टाइट करें।

  • @sandhyabillore5660
    @sandhyabillore5660 2 роки тому +1

    Element karab kaise ho jata hai, wo to pura metal ka hai na?

    • @ShishuTechno
      @ShishuTechno  2 роки тому +1

      नहीं
      एलेमेंट एक कॉपर की पाइप होती है जिसके अंदर एक फिलामेंट होता है. और पूरे एलिमेंट के ऊपर निकल की कोटिंग चढ़ी रहती है.

  • @vilasgadhe4802
    @vilasgadhe4802 Рік тому +1

    Mere gyser ka green indicator nahi jal raha hai ye kya hua hoha. Jaise hi gyser on karta hu to red light hi jalata hai green light nahi jalata. Please suggest what to do?

    • @ShishuTechno
      @ShishuTechno  Рік тому +1

      Geyser full heat hone ke baad red wali light 🔴 off hoti hai ya nahi?

  • @Arshar
    @Arshar Рік тому +1

    agar thermostat aur element ke beech ka wire baar baar jaal raha hai to kya kaaran ho sakta hai ?

    • @ShishuTechno
      @ShishuTechno  Рік тому +1

      Corrosion in wire and thimble, wire quality, wire nut loose or rusted. Ye sub Thermosta aur element dono side check kar lijiye

  • @shubhamdubey7757
    @shubhamdubey7757 2 роки тому +1

    Sir gyeser button on rkh k shower le skte hai ki ni jisse continuous hot water milte rhe? Ki phele on krk garam hone k bad switch off krk kre.......muje continuous hot shower lena acha lgta h pls reply de?

    • @ShishuTechno
      @ShishuTechno  2 роки тому

      Safety ke lihaj se geyser ko off krke hi shower lena thik hai. Agar fault hua to shower se current aa sakta hai.

    • @shubhamdubey7757
      @shubhamdubey7757 2 роки тому +1

      @@ShishuTechno continuous hot water aay isk liye fir konsa gyeser lga skte h?

    • @shubhamdubey7757
      @shubhamdubey7757 2 роки тому +1

      Band kr do to fir shower se thanda pani aane lgta h

    • @ShishuTechno
      @ShishuTechno  2 роки тому +2

      Thoda jyada capacity ka geyser lagaaye 25 litre size ka, tab bill v jyada hoga. Waise bucket se nahaana jyada safe hai., aur water v save hota hai.

    • @shubhamdubey7757
      @shubhamdubey7757 2 роки тому +1

      @@ShishuTechno thanku sir

  • @राकेशसिंह-स1व
    @राकेशसिंह-स1व 2 роки тому +1

    Geyser devta aap kaha the...Itne ache se to koi ni samjhata ....Aur ye Geyser konsi company ka hai ?

    • @ShishuTechno
      @ShishuTechno  2 роки тому +1

      Thank you 😊
      Crompton Arno Neo 15L.

  • @prashantshalya
    @prashantshalya Рік тому +1

    Sir mere geyser me power wali light to glow kr rhi h pr heating wali glow nhi kr rhi kya problem ho dhakti h

    • @ShishuTechno
      @ShishuTechno  Рік тому

      aapka geyser heat ho raha hai ki nahi .
      agar heat ho raha hai to indicator fuse ho sakta hai.
      agar heat nahi ho raha hai to overheat wali thermostat trip ho gayi hogi. oosko reset kar ke dekh lijiyega.

    • @aniruddh369
      @aniruddh369 Рік тому

      @@ShishuTechno same problem, Red light is glowing, green is not otherwise geyser is working fine. What could be the problem ? Is the Green light is faulty ? Sometimes green light blinks but not fully .. My geyser resistence between two plug terminal is 28 ohms ( having 2000 watts )

    • @aniruddh369
      @aniruddh369 Рік тому

      Apko solution Mila kuch ?

    • @ShishuTechno
      @ShishuTechno  Рік тому +1

      @@aniruddh369 corrosion or loose contact ho sakta hai indicator wali circuit, fir bhi thik na ho to neon lamp ko change kar ke dekh sakte hain.

    • @aniruddh369
      @aniruddh369 Рік тому +1

      @@ShishuTechno thank you very much

  • @RohanKumar-dw1jn
    @RohanKumar-dw1jn 2 роки тому +1

    Hindware k geyser se outlet me se hot water bohot dhire aara h ...kya kiya jaa skta h ??

    • @ShishuTechno
      @ShishuTechno  2 роки тому +1

      इसमें आपको inlet water ka pressuer and flow चेक करना चाहिए। Multi function valve चोक होने से भी फ्लो कम हो जाता है। आपके outlet tap चोक hone से भी फ्लो कम हो जाता है।

  • @shindvs
    @shindvs Рік тому +1

    Ye kitna liter aur kilowatt gyser hai?
    Konsa brand

    • @ShishuTechno
      @ShishuTechno  Рік тому +2

      Crompton Arno 15L

    • @shindvs
      @shindvs Рік тому

      @@ShishuTechno kitne watt ki heating element hai iski

    • @ShishuTechno
      @ShishuTechno  Рік тому +1

      @@shindvs 2000 watt ki hai

    • @shindvs
      @shindvs Рік тому +1

      @@ShishuTechno thank you

  • @naveenDEAS
    @naveenDEAS 11 місяців тому

    Sir Mere paas same geyser hai 25L ka!! Lekin iske side mai se and top mai se pani nikal raha hai. Maine security valve bhi new change kar diya and pura khol kar salt and rust bhi clean bhi kar diya. Jab geyser full hone lagta hai tab side se aur top par ke water overflow ho kar nikal raha hai.

    • @ShishuTechno
      @ShishuTechno  11 місяців тому

      Shayad internal tank puncture bhi ho sakta hai. Uske liye poora insulation nikal kar tank check karna padega.

  • @adarshgupta8500
    @adarshgupta8500 Рік тому +1

    Agr thermostat khrb hua toh heating severe hoga na

    • @ShishuTechno
      @ShishuTechno  Рік тому +1

      Thermostat kharab hua to overheat hoga. Ek thermostat kharaab hone pe doosra thermostat protection deta hai. Dono thermostat kharaab ho gaye to danger wali situation ho jayegi, blast 💥 bhi ho sakta hai.

    • @adarshgupta8500
      @adarshgupta8500 Рік тому

      @@ShishuTechno aap ka video bhot accha detailing tha mera geyser heat bilkul na k brabar kr rha h koi bhi electric shock ni h toh khali rod ka problem h na??

    • @ShishuTechno
      @ShishuTechno  Рік тому +1

      Thank you adarsh ji, rod ka v problem ho sakta hai aur thermostat ka bhi. iske liye pahle overload wale thermostat ko reset kar ke dekhiye jaisa kimaine video mein dikhaya v hai, otherwise rod aur dono thermostats ki continuity ya voltage check kar ke dekhna padega. Agar aapko electricity ka experience ho to hi khud se karen .

  • @snsarangi2050
    @snsarangi2050 10 місяців тому

    Why water is continuously flowing through pressure release valve when water inlet is opening?

    • @ShishuTechno
      @ShishuTechno  10 місяців тому +1

      In this video valve has been removed along with inlet hose.

  • @anushreechakraborty1455
    @anushreechakraborty1455 Рік тому

    Can we connect the the wire directly If both the indicator light is damaged??

    • @ShishuTechno
      @ShishuTechno  Рік тому +1

      If both indicators are faulty/damaged then first confirm that there is no shorting in indicator wires. Before connection to supply, ensure there is no shorting in 3 pin Top.

  • @lemedico
    @lemedico 10 місяців тому

    Are you sure we can use harsh chemicals to clean the element? Won't it strip the coating?

    • @ShishuTechno
      @ShishuTechno  10 місяців тому

      Not to use harsh chemicals, only some moderate or diluted chemicals. Though deposits are also hard and protective coatings have already been gone with deposits and due to ageing too, yet concentrated harsh chemicals are not safe.

  • @cmpatel3484
    @cmpatel3484 2 роки тому +2

    Gyesar me salt jama huaa vo kaise pata kare bin khole hue

    • @ShishuTechno
      @ShishuTechno  2 роки тому +2

      Agar heating ke time pe cracking ya unusual sound aane lage to samajh lijiye ki salt deposit ho gye hain. Agar aap kaafi salo se oosi geyser ko use kar rhe hain to aap unusual sound ko easily identify kar lenge. Agar water flow kum ho jaye to v ye salt deposit ka indication ho sakta.

    • @cmpatel3484
      @cmpatel3484 2 роки тому +1

      @@ShishuTechno water flow ok 1 year se use kartahu

    • @cmpatel3484
      @cmpatel3484 2 роки тому

      Gyger band hogaya hai

    • @cmpatel3484
      @cmpatel3484 2 роки тому

      Crompton 25 litter ka hai

  • @PraveenPandya-o3i
    @PraveenPandya-o3i 6 місяців тому +1

    Super thanks

    • @ShishuTechno
      @ShishuTechno  6 місяців тому +1

      Thank you for your compliments.

  • @vijaysharma-ww3ij
    @vijaysharma-ww3ij 2 роки тому +1

    Very grateful

  • @ramasiva4182
    @ramasiva4182 Рік тому +1

    Good