It's alive! The FrankenBeast has awakened & you are the Dr. that did it!😊 🎉 Very nice build! I like the cuffs key & all the tools, especially that locking blade...may I suggest a small lanyard on the knife so that it easier to remove from the pouch & it won't be lost? I am looking forward to see you make a similar one but with lock picking tools...😊 Good job!
Love the way you've added a liner lock and I can't believe I haven't seen a SAK with a cuff key up until now. Now I've seen it, it seems so obvious. Did Victorinox ever include a cigar cutter/punch/piercer in any of their models, that seems like another logical addition for a gentleman's Swiss Army Knife.
Thanks! Glad you appreciated those new mods. Yes, Victorinox does have a discontinued 65mm model with the cigar punch and there is an 84mm model with the cigar cutter.
I've never owed one too small but. that thing is bad ass your a talented guy I have bears paws but you're changing my mind looking forward to the next one video 📹 that is as always and to one comment it's alive a monster of a tool
Thanks! Yes, you are correct. This was not an option here though. I could try to modify the 91mm wood saw to fit in a 58mm SAK though. That'd be interesting.
Bro i love your work and thanks for it and for all these ideas. Can you solve me an doubt? I have an swisschamp victorinox but the main blade is very old, can i buy a spartan for exemple who has the same size and replace the victorinox one with the spartan one? Or do you know wich model can i use for repalece it? I appreciate it. Thank you
Hey, about your Swisschamp. If the blade is old (if it has the crossbow tangstamp) then the newer blade will work BUT you will need to add a 0.4mm washer. All of the 91mm SAK blades are similar except for the width. The newer ones are just a bit thinner.
@FittoSurvive yes i saw it, and it's fits perfect, now my problem is I can't find the pins and the rods, I tried to sand a brass rod to fit it and it worked but its difficult to close it with the hammer like you do. Do you know if I can buy the brass rods and the pins already closed on one side like the ones you have? Thanks again 4 answering, and amazing job
Or maybe could I buy it from you?? If its possible I need the 4 brass rods and the 3 pins, and if its possible the scissor spring because mine broke... i saw your website and its awesome but i dont know if its possible to buy these parts..
Hey, unfortunately there are not any screws that are available for assembling a 5 layer Swiss Army Knife. There are some Chinese scales that come with screws and pivot barrels but maxim size is 4 layers. If you wanted to fix up his knife for it to look original, then you need brass pins not screws for reassembly. You will need 2.5mm brass rods and 2.2mm. You can find pre-peened ones on Aliexpress, but make sure to measure the size you will need before ordering. Also, some come with the brass grommets and some don't. So, if you damaged the grommets during disassembly, you will need new ones. a.aliexpress.com/_mthhzPO
Love it. looks realy neat!! :) but i hope you "copied" the cuff-k for "future use" ;) as for the tweezer-holder: have you experimented with a non-moving part, tweezers on the one side, toothpick/firefly on the other? maybe there's a way to make a 3d-print just wide enogh to make both tools fit?
Glad to hear that. I did record the process for future work with the cuff key. 😉 I have been planning a 3d printed design to hold the tweezers and pick at an angle. Now I need to find somebody interested in working with me on it. (I don't have a 3d printer... Yet.) 😁
You're a master of Sak modding. Love the special builds you do. Much much appreciate your work.
Thank you! Trying to do my best and keep you all entertained. 😋👍🏻
It's alive! The FrankenBeast has awakened & you are the Dr. that did it!😊 🎉 Very nice build! I like the cuffs key & all the tools, especially that locking blade...may I suggest a small lanyard on the knife so that it easier to remove from the pouch & it won't be lost? I am looking forward to see you make a similar one but with lock picking tools...😊 Good job!
It is alive! 😋
Yeah, the lanyard is a great idea. The guy I sent it to might add one, not sure though.
Thanks again!
@@FittoSurvive you are most welcome!
Love the way you've added a liner lock and I can't believe I haven't seen a SAK with a cuff key up until now. Now I've seen it, it seems so obvious. Did Victorinox ever include a cigar cutter/punch/piercer in any of their models, that seems like another logical addition for a gentleman's Swiss Army Knife.
Thanks! Glad you appreciated those new mods.
Yes, Victorinox does have a discontinued 65mm model with the cigar punch and there is an 84mm model with the cigar cutter.
So cool! These are all works of art.
Thanks a bunch!
I've never owed one too small but. that thing is bad ass your a talented guy I have bears paws but you're changing my mind looking forward to the next one video 📹 that is as always and to one comment it's alive a monster of a tool
Thanks a bunch. I really appreciate it. 😁👍🏻👍🏻
That thing is so fckn cool. I LOVE that the liners are metal.
Thank you! 👍🏻👍🏻😁
Awesome!
Typically, saw blades have a thicker teeth side and a thinner spine side.
Thanks!
Yes, you are correct. This was not an option here though. I could try to modify the 91mm wood saw to fit in a 58mm SAK though. That'd be interesting.
Wow 🤯, It's an awesome job!!!
Glad you like it!
This is insain! ❤❤❤❤❤❤ I absolutely love this! 😍
Yes ma'am it is. 😅 Thanks!
Bro i love your work and thanks for it and for all these ideas. Can you solve me an doubt? I have an swisschamp victorinox but the main blade is very old, can i buy a spartan for exemple who has the same size and replace the victorinox one with the spartan one? Or do you know wich model can i use for repalece it? I appreciate it. Thank you
Hey, about your Swisschamp. If the blade is old (if it has the crossbow tangstamp) then the newer blade will work BUT you will need to add a 0.4mm washer.
All of the 91mm SAK blades are similar except for the width. The newer ones are just a bit thinner.
@FittoSurvive yes i saw it, and it's fits perfect, now my problem is I can't find the pins and the rods, I tried to sand a brass rod to fit it and it worked but its difficult to close it with the hammer like you do. Do you know if I can buy the brass rods and the pins already closed on one side like the ones you have? Thanks again 4 answering, and amazing job
Or maybe could I buy it from you?? If its possible I need the 4 brass rods and the 3 pins, and if its possible the scissor spring because mine broke... i saw your website and its awesome but i dont know if its possible to buy these parts..
@@SebastianoStark Send me an email: f2scustoms@gmail.com
@@FittoSurvive Done! ❤️
Very cool and interesting!!!
Thank you!!
Cody anytime you need anything just text (working on the usual)!!! Your stuff should be in the Louvre!
Thanks! I appreciate it.
Correct me if I'm wrong, but is the parcel hook really useful if it's not hinged in the middle?
You can't "fist grip" it like you could on the 91mm, but it still has use for hooking and pulling things (like tightening shoe laces and so on).
What size are the
pins that hold all the blades in 84mm?
Now I want one with scale tools. I carry the XLT so this is cool af to me.
Could be done. 🙃 It'd be a bit thicker with the scales that have accessory slots.
can you help me? i am trying to fix my old man swiss knife, it have 5 layers, what kind of screws ( model an size ) i should buy?
Hey, unfortunately there are not any screws that are available for assembling a 5 layer Swiss Army Knife. There are some Chinese scales that come with screws and pivot barrels but maxim size is 4 layers.
If you wanted to fix up his knife for it to look original, then you need brass pins not screws for reassembly.
You will need 2.5mm brass rods and 2.2mm.
You can find pre-peened ones on Aliexpress, but make sure to measure the size you will need before ordering. Also, some come with the brass grommets and some don't. So, if you damaged the grommets during disassembly, you will need new ones.
a.aliexpress.com/_mthhzPO
Can you replicate models that you have done before. That's one of 4 I need built.
I can replicate most of my builds. The exceptions are the limited edition scales or blades. Some of them can not be sourced again.
How many tools in 1 is it ???
Where I can find this one in Salt Lake City Utah ??
I make these to custom order. Check out my website for information on how to order one. www.f2scustoms.com
Love it. looks realy neat!! :) but i hope you "copied" the cuff-k for "future use" ;)
as for the tweezer-holder: have you experimented with a non-moving part, tweezers on the one side, toothpick/firefly on the other? maybe there's a way to make a 3d-print just wide enogh to make both tools fit?
Glad to hear that.
I did record the process for future work with the cuff key. 😉
I have been planning a 3d printed design to hold the tweezers and pick at an angle. Now I need to find somebody interested in working with me on it. (I don't have a 3d printer... Yet.) 😁
Very very very good custom , iam from Indonesia
Thank you 😊
Very nice
How much would you charge for something like this?😮
A build like this would cost around $1,000.
@@FittoSurvive 🙂↕️
👍👍👌👌
Thanks for watching
😮👍😍
👍🏻👍🏻😎
neat
Thanks!
La necesito ❤❤❤❤❤❤❤
👍🏻👍🏻👍🏻 It's definitely super unique.
@@FittoSurvive totally agree, unique
Too many blades 😅
There really are a ton of blades. 😅
I like how many items but it is still not to big to carry.
Thanks.