First 10 Upgrades & Mods for my LD-002R
Вставка
- Опубліковано 23 лип 2024
- My Shop: www.scottyujan.com
All music by Cameron Luck: tinyurl.com/camluckyoutube
My Instagram: / scottyujan
If you decide to buy an LD002R or other products from Creality, please consider using my affiliate link to help support my channel:
Creality: bit.ly/2X1fLKR
Amazon: amzn.to/2LaODqL
♥ Support my Channel ♥
• My Shop: www.scottyujan.com
• Paypal - rotf.lol/paypalme
• Coffee - rotf.lol/coffeeme
All Amazon and eBay links below are affiliate links. It doesn't cost you extra to buy through those and I just get a tiny commission. Thank you for supporting the channel!
Resins and filaments used:
- White: amzn.to/3aP6kqh
- Black: amzn.to/3aTfy4L
- PLA+: amzn.to/3pDeE0b
Tools:
My favorite tools of 2022 breakdown - • 42 Tools That Made The...
- Drill: amzn.to/3hqxB3B
- Hot glue gun: amzn.to/3aTmS08
- Camera: amzn.to/34TW2RH
- Wire crimp and housing kit: amzn.to/3rOAboU
- Bolts set I use: amzn.to/2X1yo1z
STLs / tutorials / resources for all upgrades:
00:00 - Intro
00:28 - Printer Customization
01:16 - 1. Flexible steel build plate
- Creality: bit.ly/3pCnxHk
- Wham Bam: bit.ly/3hqs11b
02:25 - 2. Filter upgrade
- STLs: tinyurl.com/ld2rfilterup
- Carbon filter sheets: amzn.to/37YFKcd
- Carbon filter pellets: amzn.to/2KF8eiC
03:48 - 3. Fan upgrade
- STLs: tinyurl.com/ld2rfilterup
- Noctua fan: amzn.to/38J77Gs
- Carbon filter sheets: amzn.to/37YFKcd
- Carbon filter pellets: amzn.to/2KF8eiC
- Wire crimp and housing kit: amzn.to/3rOAboU
04:24 - 4. Rear fan duct
- STLs: tinyurl.com/ld2rfanduct
- Inline duct fan: amzn.to/2KMRGoD
- 4 in air duct hose: amzn.to/2KDC1s1
- Magnets: amzn.to/2L2yqn8
06:10 - 5. Vac lids
- 2-half lids: tinyurl.com/ld2r2lids
- 1 piece lid: tinyurl.com/ld2rsinglelid
06:40 - 6. Angled dripper
- STLs: tinyurl.com/ld2rdripper
06:54 - 7. Vat holder for cleaning
- NOTE: I had to print mine slightly scaled up since it appears the design was a bit too small.
- STLs: tinyurl.com/ld2rvatholder
- Funnel and filter: amzn.to/3lkHwcU
07:24 - 8. Acrylic cover handle
- NOTE: I usedthe LARGE one in the video
- STLs: tinyurl.com/ld2rhandle
- Bolts set I use: amzn.to/2X1yo1z
08:10 - 9. Angled acrylic cover holder
- STLs: tinyurl.com/ld2rholder
08:35 - 10. Filter scoop and stirrer
- STLs: tinyurl.com/ld2rscoop
09:00 - Results + Outro
#Creality #LD002R #3DPrinting - Навчання та стиль
Thanks for watching.
I'm thinking about doing a Q&A video if that's something you guys are interested in? If so, comment here on whatever questions you guys might have about me, my Ender 3, this printer, or my love life? My astrology sign? Anything... I'm very bored. Thanks!
FAQs and updates will be added below:
Q: What slicer and support settings do I use?
A: Details on this are explained in the Ender 3 Part 2 video during the Q&A section ua-cam.com/video/uBfMoOqCgPc/v-deo.html
Q: What 3D modeling software do I use?
A: Mostly Fusion360
Hi ! What's the project you're the most proud of ? Keep on making 😉
How did you discovered 3d printing? What are the things that you print mostly in the "everydays"? How can 3d printing change the world?
When will you make Ender 3 Part 2
Why does your microphone sound so corrupt. The one in the ender 3 video was way better.
One simple question lol, R U single?
this video cleared my skin, cured my depression and saved my marriage...
hahahahahaha!!!
@Landon Song Probably the resin lol
aZn
I'm buying this printer because of this video and this comment
Spongebob guy: “My eyes!!!!!!!!”
More great content, Scott! I don't think this has to be a 3D printing channel. People are drawn to your editing/production/personality. I honestly think you could cover whatever you want and find success. Happy New Year! 2021 looking bright my guy!
you're the best, man! thanks for the kind words
🎉
The editing, effects, background music and the overall content is just so damn smooth and great! This is just a joy to watch :)
This video showed me the light. I am now on the right path.
This is the way
I have NEVER seen an AC vent like that and it looks absolutely stellar. My duct hose is just going to a window that's always cracked open in my house...
I saw it quite often. But unless it is already built-in by default and mobile AC is expected to be used, you have to (or find someone) to drill hole through the wall with that insert.
And I am if the plug for it is of any insulating type - winters here can be quite unpleasant.
yeah the AC port looks uuusefull
This is the best Creality LD2R content I have seen thus far! Thank you so much for going through the trouble of testing all these mods, some of them are really essential! Please keep these videos up and coming.
I usually don't comment or subscribe to UA-camrs, but you're doing just too damn good of a job on 3D printing for beginners and experienced printers, but ALSO RESIN!? Best 3D printer UA-camr.
This video showed me the beauty of dance. I have decided to drop my career and dance again.
Brilliant designs, top notch editing as always
Your style of editing is probably my all-time favorite, keeps my eyes glued to the screen! Keep it up man, you're doing amazing.
Thank you so much for putting this video together. I just purchased a LD-002H which is my first resin based 3D printer.
You are very clear and to the point in your videos. I will definitely look forward to your other videos.
Dude your ingenuity with everything you do on upgrades and creative is beyond words!
The editing quality of your videos is just so good, I can't get enough
I spent near a month upgrading my Ender 3 Pro thanks to your video and now that I'm switching to resin I suspect you, sir, will make me spend another month. Thanks for all the good ideas and for your excellent videos!
Holy cow, this is mad inspiring. Really cool stuff man!
Every single little detail is incredibly well thought & then well designed.
This channel is a must for lovers of design and 3D printing, a real mental ASMR. Thanks
It's literally everything I was having issues with! That handle! Hell yes.
Thank you for this video, amazing quality and mods! I just picked up an LD-002R from Microcenter a couple weeks ago. I'm so hooked, that I bought a CR-30 today.
Thanks for pointing out the VOCs, more people need to know about this. Resin fumes are no joke.
And the resin itself is toxic
Your videos are awesome, always excited when I see one pop up! Very clever designs and prints. Also the editing is a work of art.
scott i love your channel i have been really stressed because of my ender 3 pro but your videos gave me the inspiration to finally finish it thank you so much
Extraordinary upgrades. Cool designs.
You are not only good looking and smart, but more importantly, what an ingeniously brilliant designer and executer
! You Rock
Excellent video. I just bought the Creality Halot One (Basically the same machine) and have done almost all upgrades you recommended. It really does improve ease of use. Thanks.
You make so good videos!!!!! Thanks for all the tips! Keep the good work!
This is awesome. So many great ideas!
Your videos are absolutely amazing. I am amazed by your editing skills as well as your simple creativity when coming up with solutions. I wish more people would watch your videos
Hey Dude, great videos! I like all the mods you're making to your toys. Especially how you personalize the gear to your taste. A+
Great work Scott. Cant wait to see what you have in store for the CR-30
Yes finally a new video! Been waiting for ages, I love your content man keep going! You inspired me to purchase and modify my Ender 3, watched that video over 10 times now and I keep upgrading it. It prints SO good! I really want to get into the Resin printers but I have no found a purpose for them yet (in my business).
Just wanted to say you saved my Ender 3 with your upgrade video and I got mine running smooth now thanks man
I was actually feeling the dance and the beat its definitely your signature now 🙌🏾👏🏾
Pretty cool, I like your style, and your every idea is so great.
You are on another level, great job!!!
Wow! All these upgrades are genious! Also the video is really well done and fun to watch, thanks!
I like your videos a lot. They're fun and packed with information. Hope you do really good on UA-cam.
Amazing tweeks! Super tidy. Also video straight in to the point. Keep going in that way!! Thanks for the insights.
Thanks for the sharing. You insprired me for upgrading my Longer Orange10 !
Genius. Love the two tone white and black as well. Very classy!
you take your modding seriously and i lover it, keep making vids like these👌
bro I keep rewatching these vids cause the edits are just so cleeeaann
5:46 i like the fact that your support jus comes right off
Thanks for your time
I need part 3 of ender 3 upgrades even though part 2 doesn't come out yet! What a satisfying video. I'm literally feel refreshing while watching your videos!
Great content as always! Happy New Year
Well done dude! Definitely going to do some of these.
Totally Subscribed. Keep the 3d print videos coming. All the prints that you have designed were awesome and has really got me wanting to work on my own design more. Cant wait to see your video on the 3DPrintMill and your Ender 3 update. Keep it up man great video.
Back at it again!!
Hi Scott, you can use mixture of zeolite beads with active carbon to adsorb the VOC. It works and is a well known method for adsorbing organic vapors ;)
WOW that edit at 1:54 was really smooth! Had to go back to double check it!
The custom filter was epic!
I don’t even have that printer and came when you posted the ender 3 video, im just here to relax and watch. Your way of editing and making videos is very unique, I enjoyed watching again :) enjoy your day!
Scott Yu-jan 2020 : 27k subs
Scott Yu jan 2023: 1mil subs
Keep up the good work
lets hope that happens
Excellent upgrades dude😳
Great content! Really like your whole video style, keep up the great work! Happy New Year.
The use of magnets and screws box is really cool! I think I'll need to get a set of those to work with
YES new video from
Scott Yu-Jan, this guy is sooo good. keep up the good job 😀👍
Love the content man, keep up the great work!
you are the best i waited sooo long for this
you are great, i learn so much from you everyday
This actually helps me with my creality now I need to make those upgrades.
Beyond impressed!
As always Scott, super solid vid
Ok, I did the same thing for my Form3 just this past week (75CFM, inline fan + 3" flex duct). I designed a hood that sits on top of the enclosure (yes it is bulky, but space was available). Reason being I didn't want to have dust partickes get sucked into enclosure. But, good job, as an engineer specializing in particles filteration I approve your method and ingenuity (for whatever it is worth).
Genius as always! I admire how you model parts as you need them for a situation (which is many times). Plus your video flow is super smooth. Keep up the good work! Looking fwd to more :)
These mods are amazing!
This edit is insane, can't wait for more. Especially as I have an Ender 3 Pro and backed the belt printer too. Also considering getting a resin printer, not sure which one yet, but you make a good case for the LD-002R haha.
I was already using a few of these but some of later ones are really nice too. I love the cover holder. Im going to print that one tonight and you have inspired me to upgrade my air filtering. I just put the cover one and close the closet door but I can do better than that.
I just got a printer myself and I’ll be trying these upgrades! Thank you!
Amazing job!
Scott I have to say that I LOVE your content! :3
Excellent video. Greetings from Peru and have a successful 2021...!!!
Was looking at upgrades for ender 3 and then saw a store local selling one of these. Stayed away because I figured resin would be a pain in the ass to get and use but this has made it very appealing. Just need to get a bigger workspace inside the house
happy new year!
Smooth Scott love the content keep it coming.
Wow, smart and clean : good design
Amazing video, really great job.
I was thinking about getting a resin printer for a little while, this video helped me settle it. I bought it. Getting some upgrades from this video as well.
I got inspired and ordered the cure and wash station as well and I'm currently designing a box where I can put both in that also has a ventilation system for airflow
Your videos are awesome!! Glad you are staying safe. I was worried about your health with printing and sleeping in such a small confined space. Maybe you could 3D print a home. Can’t wait to see what you do with the next printer.
That reversable lid holder blew my mind. Very cool design.
Amazing video Scott ! Love the way you edit/shoot these, very quick and cadenced, it's a real pleasure to watch
Also i bought a 3D printer because of your ender 3 pro video xD
thank you for the kind words man. these take a while to edit so i'm glad someone appreciates that haha. cheers
These are awesome!
Love your channel and your edits. Please keep making videos!
Great video! Definitely going to try some of these on my printer.
Amazing Vid, great mods!.
keep up the insane video quality
awesome videos man! Subbed!
Love these vids!
dude honestly I don't watch your videos super regularly but whenever I do I find them to be super high quality and overall nice to watch, have been subbed for a while now just because of that
thanks for the content
Awesome video bro......I also live in an apt and the air duct is great!!!! Thank You and keep those great videos coming!
Tiny Machines 3D makes a flexible plate, too. First thing I bought when I got my LD002R. Didn't have to wet sand to get good adhesion.
Found this video right when I got my LD-002R and thought it was super well produced but not all the mods were super necessary. I think I've come back to this video at least half a dozen times when I realize I need something I remember from the video. At this point I think I've added every mod except the cover handle and holder! Only extra mods I might recommend are a cover, only about $10 on amazon and block more light, blocking all the air intakes except for the bottom so less resin fumes leak out, making a gasket for the cover so that seals better, and for the really intense, buying a LD-002H mono screen from amazon for around $50, best upgrade so far.
if you have problems with resin sticking to the inside of the orange glass cover, maybe try using some automotive ceramic coating on the inside. it's resistent to the organics in the resin and should make the glass "non stick". could work pretty well actually!
keep it up man, love your videos!
Just great ideas. Thx!
100 K soon. You put a lot of effort, thoughts, heart into your videos.
thank you, akash. that’s so kind. i appreciate it :)
@@ScottYuJan They should have given you the newer LD-002 H
@@ScottYuJan Hey scott is it possible to get the actual file for the VENT. I want to modify it for different size of magnets. Thank You.
the quality of life king
Great setup good job, thank you.
Awesome video!