Leaking Water Pump: Replacing the Water Pump on 1990 Cadillac DeVille
Вставка
- Опубліковано 25 лип 2024
- Hello, everyone! Explore the process of replacing the water pump on your 1985-1993 Cadillac DeVille. Don't forget to show your support by liking, sharing, and subscribing! Your engagement truly matters. Thanks for watching!
⏱Timecodes:
0:00 - Intro
1:01 - Raise The Vehicle
1:46 - Drain Coolant
2:18 - AC Accumulator Removal
2:50 - Water Pump Pulley
⏳REPAIR TIME: 3 Hours
⚙️PARTS:
1. Water Pump amzn.to/3ou2Wd2
2. Lower Radiator Hose amzn.to/3UO6UJA
3. Upper Radiator Hose amzn.to/3GTxoDS
4. Serpentine Belt amzn.to/3opNe2T
5. Disposable Gloves amzn.to/41pDvIk
🔧SERVICE TOOLS:
1. Socket Set amzn.to/3GYvVMu
2. Floor Jack amzn.to/3zEMyJ4
3. Jack Stands amzn.to/3MoAMu2
4. Extension Adapters amzn.to/3AaMocH
5. Electric Ratchet amzn.to/3AfBN0h
6. Drain Container amzn.to/3MXQqNo
7. 1/2-Inch Drive Ratchet amzn.to/3KI4YOk
Please note that the links are affiliate links, As an Amazon Associate, I earn a small commission if you make a purchase through those links. This commission helps support the maintenance and growth of this channel. Thank you for your support
SOCIALS:
📸Instagram: @xj.jessse
📨Business Email: jessejalvarezxj@gmail.com
🎶MUSIC:
Uppbeat: uppbeat.io/?referral=jesse-2j58r
#Cadillac #DeVille #WaterPump
DISCLAIMER:
This video aims to assist fellow Cadillac DeVille owners based on my expertise. The information shared is provided as is, without any guarantee. My insights are primarily derived from hands-on car experience and should not be a substitute for professional guidance or a shop manual. I cannot accept any responsibility for property damage or injury resulting from the use of the information in this video. Please use this guidance at your own discretion and risk. - Авто та транспорт
Thank you bro!!
Helpful video! Here's an important tip tho: there's an ACCESS PANEL behind the pass side wheel that makes it easier 2get2 the lower bolts (i have a '93 4.9; the 4.5 shld be similar). Remove the pulley bolts by jamming a screwdriver (etc) thru it to keep it from turning, then let it hang there. It will come off later when you unbolt the pump. This SHOULD eliminate the need to raise the engine but the 4.5 may be slightly different. Dont forget to transfer the pulley to the new pump BEFORE u rebolt that to the engine. The torx screws are no biggie; they're not on tight. Be careful with those 13 little screws (10mm) he mentions; they are ez to drop! Btw: after ur done, refill the coolant thru the thermostat housing, NOT the radiator cap; this prevents air binding. Good luck. Thx again guy for the video😊
The "Chris Fix" reference was funny as 😂 hell. You gotta give it to XJ Jesse in reference to his quality jobs. He takes his time and does it right so he doesn't have to do it again. 😊
4:14 i feel your pain brother this one’s a biddy
About to do this on my kids mothers extra car. Ima mechanic but was looking to find what tools to pack with me.
Video helped me alot to know what I needed. Took me 23 min to total to change about 45 with double checks an finishing buttoning up to test start.
I was in the woods behind her house with no tools around but what I brought from home.
So if your not a mechanic an still like to try to learn an diy then this is a project you can handle. For anyone that mechanically inclined.
I would say give yourself 2 hr of working time if your not a mechanic. That should be enough for the average person to give it a go. But if your decent with tools and fixing stuff then I would say you could get the water pump shaped in a hour an be buttoning stuff up at the hour mark .
But yeah don't be afraid this is a good job to learn alot an shot how stuff can be in awkward places to work on but it's str8 forward to do with a mix of tools an small problem solving
Bruh u the only one on UA-cam thank u bruh
Take your time and be patient. This job can be frustrating and by the way, I did end up using fel-pro gasket and some RTV silicone. I did this job twice. 🥲
Appreciate the video homie. Doing the same job now on my 90 Seville. Luckily there’s quite a bit of room compared to the deville so all I had to remove was the battery and coolant res, and had quite a bit of space to work with. Only bummer is 3 broken 10mm bolts I’ve gotta extract… it’s never that easy 😭
Awesome video bro, I felt you when you were praying it wouldn’t leak after installing new pump 😂
"HEY GUYS! ChrisFix here with directions on how to replace your 4.5 liter Caddy water pump"
XJJesse: "F*** I needed this a month ago!!"
great video Jesse thanks god bless you
Awesome man just got a 91 coupe deville and starting to work on it now, it runs but still want to replace everything basically. Will be my first time tearing a car down lets see how it goes I dont know much lol
Each time a part needs to be replaced, you hear "another one", in a DJ Khaled voice in your head :) Have a great day!
I'm working on my 92 with the 4.9L. How the hell did you get the bottom torx bolt, and the bolt on the bottom under the pully out. I've spent an hour and a half on just those 2, and still don't have them out. I'm about ready to push this thing off a cliff.
4.5 was a good engine
Hi Man, can you please advise me regarding a 1992 Cadillac? How many liters of oil does the Cadillac gearbox hold?
7qts, dexron 3