Great video i have a svl 97-2 no codes but really bad vibration at idle plenty of power operates fine changed fuel filters just to see if it would help did not make any defrence any advice would be great thanks
What a great video. Thank you! I have a kubota 95sl 2s which has thrown error 9500 which is supposed to be associated with def sensor. Have you had Ny experiences with this?
this video is so entirely clear and concise..... so good that I'm hoping you'll point me in the right direction to deal with a 9510 code..... SVL95 2S ... running fine, I filled diesel tank with diesel. upon getting into cab 9510 code.... how could they be related? how could they not be related? Thanks for whatever help.. jk
Contact your dealer. E9510 is a code for urea injector error. There is a recall out on some of these units that make fix your issue at no charge. Worth a try. Parts are expensive. Let me know how it works out for you.
Hopefully it didn't run out of oil. These units have an over heat shut down. When the exhaust gets too hot it will shut down and not restart until it cools down. Let me know how your turns out.
So when I messaged you 3 weeks ago I was on a big job. My machine still won’t run. I changed the thermal beside the thermostat because it was leaking. I replaced the alternator and starter now I’m getting 18.6 volts. 😢
My name is Seth - wife over took my UA-cam acct. My SVL 95-2S is throwing the 9510 code which says is the DEF injector. I took it apart by watching your video and mine does not appear to be wet or damaged. Of course that doesnt mean it isnt bad, but do you know how i would test if it is actually working? Thank you
Hard to do unless you have a laptop and the software. But try calling your dealer with your serial number. Some units have a recall that part of the fix includes a def injector. You might be lucky. Those things are expensive. Keep me posted. Thanks for watching.
@shanersmechaniclife3164 thanks for the response! After I cleaned the injector port (it was a little white) and went to put it back on, I noticed the insulation on the electrical connector that plugs into it was gone and some bare wire was exposed. I'm not sure if the ECM would have seen that and threw that code, but I took some solder and heat shrink and made it right. I ran it about 5 minutes to see if the code would pop up again, but so far so good. I am going to run it a little bit more this weekend and I will let you know if it reappears. Thank you
First thing I would check are your fuel filters. Not sure how many people use you skid steer but I have seen people get def and fuel tanks mixed up. Let me know what you find. Hope you find a cheap fix.
@@shanersmechaniclife3164 Hi, I have a 95-2s, but when dirt gets packed under the oil pan, the machine has a heavy vibration at idle. Clean out the belly pan, and see if that works
Thank You, thought it might be the pump but ill look at that first, again thanks, JIM
Your welcome. Hope it works out for you. Keep me posted.
Nice video! Have you had to deal with error code 9500?
I just deleated the Turd $3500.00 including the straight pipe, stainless and I did it all myself and gained horespower.............NO DEF
Bro one question my kubota 95 active three code E:9100 E:9109 E:9509
Great video i have a svl 97-2 no codes but really bad vibration at idle plenty of power operates fine changed fuel filters just to see if it would help did not make any defrence any advice would be great thanks
Thank you for the feedback. Sorry for my delayed reply. Have you tried checking your motor mounts? Sometimes they show wear at lower RPM.
Great video.
Thanks! Glad you enjoyed it. Thanks for watching.
What a great video. Thank you! I have a kubota 95sl 2s which has thrown error 9500 which is supposed to be associated with def sensor. Have you had Ny experiences with this?
Hi sr do you how can I fix the code of e9002
this video is so entirely clear and concise..... so good that I'm hoping you'll point me in the right direction to deal with a 9510 code..... SVL95 2S ... running fine, I filled diesel tank with diesel. upon getting into cab 9510 code.... how could they be related? how could they not be related? Thanks for whatever help.. jk
Contact your dealer. E9510 is a code for urea injector error. There is a recall out on some of these units that make fix your issue at no charge. Worth a try. Parts are expensive. Let me know how it works out for you.
I got a E 9125 code HP5 system ... what the heck is a HP5 system and what does that mean?
Where is the EGT exhaust gas temperature sensor on this exact machine mine states it’s bad!!?? Anyone?
Hey my drain line on my 95-2s busted machine was working in Aux -2 overheated won’t crank
Hopefully it didn't run out of oil. These units have an over heat shut down. When the exhaust gets too hot it will shut down and not restart until it cools down. Let me know how your turns out.
So when I messaged you 3 weeks ago I was on a big job. My machine still won’t run. I changed the thermal beside the thermostat because it was leaking. I replaced the alternator and starter now I’m getting 18.6 volts. 😢
My name is Seth - wife over took my UA-cam acct. My SVL 95-2S is throwing the 9510 code which says is the DEF injector. I took it apart by watching your video and mine does not appear to be wet or damaged. Of course that doesnt mean it isnt bad, but do you know how i would test if it is actually working? Thank you
Hard to do unless you have a laptop and the software. But try calling your dealer with your serial number. Some units have a recall that part of the fix includes a def injector. You might be lucky. Those things are expensive. Keep me posted. Thanks for watching.
@shanersmechaniclife3164 thanks for the response! After I cleaned the injector port (it was a little white) and went to put it back on, I noticed the insulation on the electrical connector that plugs into it was gone and some bare wire was exposed. I'm not sure if the ECM would have seen that and threw that code, but I took some solder and heat shrink and made it right. I ran it about 5 minutes to see if the code would pop up again, but so far so good. I am going to run it a little bit more this weekend and I will let you know if it reappears. Thank you
Where is the diagnostic port for that machine..??
You had some type of diagnostic tool hooked up to it which one was it ??
My kubota 97-2 2022 has the same codes and the motor shakes bad.
First thing I would check are your fuel filters. Not sure how many people use you skid steer but I have seen people get def and fuel tanks mixed up. Let me know what you find. Hope you find a cheap fix.
@@shanersmechaniclife3164 Hi, I have a 95-2s, but when dirt gets packed under the oil pan, the machine has a heavy vibration at idle. Clean out the belly pan, and see if that works
🎉🎉🎉
💯👍
No