i have like to see a subwoofer for small cars like mini cooper or wv .I would like to see if you can make it sound great and save space... That is my challenge for you Mark! Great JOB!! CAF the best !!
Can you do a video on box design, such as port length and diameter, etc. and how it affects the tuning? I'm trying to build a custom box for my truck, and a video on Lessons Learned would be awesome.
@CarAudioFabrication could you send comment a link to those ball and socket fasteners, or would you suggest neodymium magnets instead to secure a false wall to the enclosure?
Awesome build Mark! Is it possible to apply the same carpeting technique when your port is on the side of the box? wouldn't it interfere the rabbets on the side to tuck the carpet in?
I would like for you if you have a moment to set up plans for a 35hz tuned single 10 " dual voice coil 600 wat pioneer would very much appreciate it's for a 03 suburban
hey there my name Sean and I'm from Oahu,Hawaii and I would like to see you build a custom slot ported box for a pair of RE 12" subs but it has to fit just right in a 2011 Nissan altima that's what I'm trying to figure out and about to get busy with making it
The Design of the FaceBrace Part (No 4 in the Desription) looks amazing, but it is not as efficient as the orginal cross shaped. Those 45 corners are quite useless, too, if you build everythig precise and use good quality glue and maybe some screws (drill hole first in MDF or it will split the board) But overall a really good looking Box that needs lots of tools unfortunately.
Have you seen the death Box it's supposed to be a Box inside of a Box that you can adjust the woofer And you need to use a free air woofer for maximum performance See if that's up to the challenge for you Thank you and I hope to see the video
Id like to watch this as well I'm in the process of building mine for a 2014 Chevy Crew. Im shooting for two sealed 10s facing upward with an amp rack in the center
If you could, somehow, build a box for a 12" or 10" shallow mount sub for a truck, that would be spiffy! Maybe even get creative in how/where it is placed. I have a 12" non-shallow mount in my truck and its a standard ported box and I lose a whole seat because it is in there. I haven't found a good solution around this, yet.
I had a blast building this box! Hope you guys enjoyed the added custom baffle.
that's a really nice box especially the attention to all the details nice job
Dude, you are a design god 😁
the plans are unavailable?
What is the name of the little snap things retaining the front panel and where to buy?.
Wow, very nice! I love the lines on the baffle and the color contrast. IMO this is the nicest looking box you've built so far.
Mark as always awesome glad to see that you always use your safety tools when cutting your wood
Good Job..
excelente amigos . Que trabajo mas limpio y prolijo...
excelent friends . That job is very clean and perfect.. Thanks
I would love to see a single 15" subwoofer box built for a Sound Qubed HDC3. Great work and excellent attention to detail!
Calculations, tips? For the begginers watching this
Its more valuable info that letting them see the assembly. But I get it
That looks great, I have a 2012 acura TL I would like to add 2 10" but neatly so it won't take up space and won't look horrible .
awesome... I'm from Indonesia, n now work in Malaysia... thx for videos...
i have like to see a subwoofer for small cars like mini cooper or wv .I would like to see if you can make it sound great and save space... That is my challenge for you Mark! Great JOB!! CAF the best !!
id like to see you build a box for 1 or 2 JL W7 12's ... cool video, you build some very nice boxes Mark.
Truly inspiring design and execution. Well done.
I would like to see a tuned dual 10" kicker compR slot port box. With the side lit led plexiglass.
Can you do a video on box design, such as port length and diameter, etc. and how it affects the tuning? I'm trying to build a custom box for my truck, and a video on Lessons Learned would be awesome.
Any videos on or about building a sub box for a single cab pick up tuck
Wow amazing super design
dam he did a great job ... very detail
That was awesome,,,,,,beautiful finish,,,,,
amazing I have started developing interest on a wood working .Please the name of tools you are using thanks for sharing
Very nice! I love how clean it looks Mark!!! Here's an amateur question... Wouldn't screws make the joints stronger?
@CarAudioFabrication could you send comment a link to those ball and socket fasteners, or would you suggest neodymium magnets instead to secure a false wall to the enclosure?
Looks very nice
You sir, are an artist. Where did you learn to use all these tools?
good one. what is the box measurement.... ?
Beautiful
I love your skill
Awesome build Mark! Is it possible to apply the same carpeting technique when your port is on the side of the box? wouldn't it interfere the rabbets on the side to tuck the carpet in?
You can add a round over and intentionally go a little deep. This will leave a lip, still to the rabbet on the other 3 edges of the side.
I would like to see u build a nice box for a solo baric l5 15 kicker square subwoofer
greetings from mexico good video ..
What do you use to clean your spray gun after you use the spray adhesive?
love it... great job and clean
Do you have a link for the fasteners used on the outer baffle? Great job as usual
please PLEASE build a dual 12" box for the Sundown ZV.3 12's PLEASE!!!!
I would like for you if you have a moment to set up plans for a 35hz tuned single 10 " dual voice coil 600 wat pioneer would very much appreciate it's for a 03 suburban
Love your videos!!!
Can u do two 12 inch soundqubed subwoofer box ported
Sick work man
Good!!! Well done Job!!!)))
very nice!
hey there my name Sean and I'm from Oahu,Hawaii and I would like to see you build a custom slot ported box for a pair of RE 12" subs but it has to fit just right in a 2011 Nissan altima that's what I'm trying to figure out and about to get busy with making it
Very good
can you build a horn loaded subwoofer box I made one and man it hits hard I'm making a scoop next
what are the gums that you use to join the baffles?? please
id like so see one for a 2001 mustang convertible. cant find anything worth a damn for it. 12 inch
Hey mark if you don't have a router table how could I make a perfect copy of my wood
Give this video a thumbs up and share if you want to see more videos like it!
A ported box for 2 Rockford Fosgate 12's?
sick bro
have you build a box for 2013 camaro I have sundown x 10s
nice box!
can u build a 4th order 2:1 ratio for 15s or 12s for a blow though
How bout a ported box thru the hatrack 😀 ?
this is awesome!
The Design of the FaceBrace Part (No 4 in the Desription) looks amazing, but it is not as efficient as the orginal cross shaped.
Those 45 corners are quite useless, too, if you build everythig precise and use good quality glue and maybe some screws (drill hole first in MDF or it will split the board)
But overall a really good looking Box that needs lots of tools unfortunately.
sorry, where can i find that kind of ball socket fastener? or that is it its name? sorry for my bad english
exelente trabajo!!!
Do you have the same build except with the Tropo V2 subs?
Super brother
clean
I would like to see a 4th order box
very nice job!
Great!!
My OCD is kicking in, I'm not a fan of the 3 lines and the 2 subs not being equally distributed lol.. But it's nice design
build a box for 4 skar ddx d2 12" subs.. would love to see that.. and tune around 32hz.. thx
Would this work for skar sdr 10 inch?
how about a box for 2 10" going under rear seat of a 2002-2006 dodge ram
Amazing sir,,,,,
Have you seen the death Box it's supposed to be a Box inside of a Box that you can adjust the woofer And you need to use a free air woofer for maximum performance See if that's up to the challenge for you Thank you and I hope to see the video
Build an enclosure for two meso 6.5 subs. Ported please, thank
you.
Perfect
Where did you guys get the vynl?
*sir, please make bandpass passive radiator downfiring box*
awesome job .... thank a lot
Muito bem feita essa caixa.
a ported box like That one for 2 15 inch db drives wdx2k
good job
Mega cab box for one 12 t-2?
Para melhor super BASS!!!
I was wondering if you could build a subwoofer box for under the seats in an extended cab truck?
Id like to watch this as well I'm in the process of building mine for a 2014 Chevy Crew. Im shooting for two sealed 10s facing upward with an amp rack in the center
Don't forget to subscribe to our channel!
Hi, ct sound 8inch subwoofer price
Hermoso!!!
I'd like to see a box with 3 meso 8's
What is the name of front pannel winding material
Purchase here:
www.amazon.com/CT-Sounds-Bio-1-0-10/dp/B01M05N98A/
Massive summo 124 doula box
impresionante
2 12 inch pioneer TS-W3003D4 custom box
I noticed you dont use clamps when gluing
No need when using the nail air gun.
skar audio zvx 8 inch tline for single cab truck
build a subwoofer box for a single12" p3,rockford fosgate,with a labyrinth port
What CT Sounds subwoofer do you want to see a design for next?
How about a truck box build for two ported 8s or 1 ported 10 behind the seat please and thank you
id like a ported box for a pair of Sundown E8
+CT Sounds Nice build video, great box, I like a ported box with CT logo light up with LED Lights
How about a sub box for and 04-08 f150 for 2 12in full type r's
+CT Sounds How about how to build a ported fiberglass custom box (any vehicle)
one for my car
If you could, somehow, build a box for a 12" or 10" shallow mount sub for a truck, that would be spiffy! Maybe even get creative in how/where it is placed. I have a 12" non-shallow mount in my truck and its a standard ported box and I lose a whole seat because it is in there. I haven't found a good solution around this, yet.
How many hours to make this box?
super
can i get this design? plz,
I have never been able to cut a piece of mdf board completely straight
Car audio t line box build
The link doesnt work anymore