Installing the Hayward OmniLogic Panel - Episode 1

In this episode, I show how I did the initial install of the Hayward OmniLogic pool automation subpanel and associated electrical connections.
Hayward OmniLogic Automation Panel: amzn.to/3S6popg
If you want to support the channel, please consider using our affiliate links when you do your shopping:
* Amazon: www.amazon.com...
* eBay: ebay.us/h2onK0

[@michaelabelaj1581]

Extremely helpful. Im building my pool and researching a ton about wiring this up, videos are not useful. Wondering if you can do an in-depth video of how everything is exactly wired in the OmniLogic. Thanks!

[@Ciband]

I definitely will when I get there. Thanks for watching.

[@latroncheffin1916]

those knockouts are 1/2 and 3/4

[@hascet]

I probably would have put the controller inside a Hammond 1414PHJ6 and connected that back to the panel with 1/2" conduit and bring another 1/2" conduit in for the ethernet. Then your ethernet connection will be protected from the elements as well. With that ethernet port exposed it seems like they intended for it to be installed indoors or a protected area?

[@Ciband]

Thank you for the idea. It’s a good one.
The controllers certainly advertised as outdoor rated. The cover has a good gasket on it. I agree about the exposed Ethernet. We will see how it fairs.
Another video is in the works showing that piece. I tried to protect it as best I can.
If it ends up going to crap, I’ll show that too.
Thanks for watching.