Nice car I am looking into getting one myself. What are your model recommendations? Also is your car stock height w body kit, or did you lower it a bit?
If you care about performance get the 2.0 and tune immediately. Intake downpipe and stage 3 tune. Then work on the small parts like intercooler and turbo
Where did you jack it up cause I’ve never seen a jack point where it was in the video? Just the jack stand points and the one behind the engine along with in the rear near the trunk?
@@JDUB2580UA-cam yeah I’ve been using the exposed pinch weld right next to the jack stand point but was unsure of overstressing the thin metal there🤷♂️ just felt like I was the only one and doing it wrong
Thanks for sharing. Do you have a video of the install for the black front lip @8:49 you installed? Also, how is the overall fitment and quality so far? TIA
@@JDUB2580UA-cam just bought the car a month ago..but from what i remember the whole headlight assembly (low beam and high beam )goes lit up whenever its on "auto" and "on"
@@JDUB2580UA-cam just downloaded the owners manual..the car didn't come with it..just noticed that last week. Yes..i need to pull the lever for 30 seconds or so to turn it on, will try that later.
@stevemarty6229 if anything it add width yo the base so in theory it handles a little bit better. But not noticeable if you want better handling get better tires, wider wheels, coil-overs, then alignment arms like camber and toe
@@JDUB2580UA-cam exactly how I thought about the situation. Thank you for the help. I haven’t talked to anyone with them. I wasn’t sure if it was more of a look thing rather than handling. I got the 1.5t base with like 17 x 7.5 so it’s shot. Soo i definitely need bigger wheels. But I wanted to try it first since it looked sick. U think 9” wheels will fit without rubbing ?
@@JDUB2580UA-cam i heard do alignment after you add them, i did lowering springs and got alignment done so im just gunna run the spacers and wish for the best😂
@@JDUB2580UA-camwait so ur telling me that this didn’t increase performance when taking turns?? I literally just as going to buy becuz it “helps” with handling,,, i was told
I may go with this route once I buy my D2 springs on my 2.0T. Cheap alternative for now
Exactly. Looks good for cheap
Nice car I am looking into getting one myself. What are your model recommendations? Also is your car stock height w body kit, or did you lower it a bit?
If you care about performance get the 2.0 and tune immediately. Intake downpipe and stage 3 tune. Then work on the small parts like intercooler and turbo
@JDUB2580UA-cam what's cost of downpipe and tune? No issues passing smog right
Where did you jack it up cause I’ve never seen a jack point where it was in the video? Just the jack stand points and the one behind the engine along with in the rear near the trunk?
Honestly not sure I use the points where the pinch weld is exposed
@@JDUB2580UA-cam yeah I’ve been using the exposed pinch weld right next to the jack stand point but was unsure of overstressing the thin metal there🤷♂️ just felt like I was the only one and doing it wrong
6 months passed after installation. Do you have any problems in nowadays with wheel spacers ?
No nothing yet still the same as when I put them on!!
I know I’m late to this video. But how did the spacers hold up? No problems to be looking out for?
Much better!!
Thanks for sharing. Do you have a video of the install for the black front lip @8:49 you installed? Also, how is the overall fitment and quality so far? TIA
Unfortunately no I threw it on really quick
Did you take off the hub ring?
Hey brother..could you show your headlights operation..please.
I did a video on high beams if that helps
@@JDUB2580UA-cam just bought the car a month ago..but from what i remember the whole headlight assembly (low beam and high beam )goes lit up whenever its on "auto" and "on"
If you see a little symbol with a “A” in the light your auto high beams are on you pull the stock towards you to turn it on and off
@@JDUB2580UA-cam just downloaded the owners manual..the car didn't come with it..just noticed that last week. Yes..i need to pull the lever for 30 seconds or so to turn it on, will try that later.
This may be a dumb question but adding spacers doesn't mess up the alignment right?
No but it wouldn't hurt to get one if you notice anything
@@JDUB2580UA-cam aight thanks
Does it drive different?
No not in my opinion
@@JDUB2580UA-cam handling is no different? Not any better?
@stevemarty6229 if anything it add width yo the base so in theory it handles a little bit better. But not noticeable if you want better handling get better tires, wider wheels, coil-overs, then alignment arms like camber and toe
@@JDUB2580UA-cam exactly how I thought about the situation. Thank you for the help. I haven’t talked to anyone with them. I wasn’t sure if it was more of a look thing rather than handling. I got the 1.5t base with like 17 x 7.5 so it’s shot. Soo i definitely need bigger wheels. But I wanted to try it first since it looked sick. U think 9” wheels will fit without rubbing ?
Wont the tires hit your arc now when going over a pot hole?
I never rubbed and I also don’t hit potholes intentionally
Need alignment after putting spacers on?
Probably but I never did
@@JDUB2580UA-cam i heard do alignment after you add them, i did lowering springs and got alignment done so im just gunna run the spacers and wish for the best😂
It comes with set of four or each one is 200 $ ‘ ?
Set of 4
did you have to cut the lug nut shorter because i saw that some people have to cut it shorter if the lug nut is too long
If you go shorter than 50MM you will have too that’s why I went with these
@@JDUB2580UA-camI think you meant to say 25mm
You notice any difference in mpg with this particular mod?
None feel and drives the same just looks a whole lot better
@@JDUB2580UA-camwait so ur telling me that this didn’t increase performance when taking turns?? I literally just as going to buy becuz it “helps” with handling,,, i was told
love it
What size tires were you running here?
245/40/19
@@JDUB2580UA-cam do the tires look like they're wearing in evenly?
Just put some washers
What size wheel spacer did you get 20mm or 25mm spacers?
@seamandemon19 25mm
@@JDUB2580UA-cam did you keep the regular lugs with the wheel locks or did you have to change?
Kept the OEM lugs
How much did the set of 4 cost?
~ $250
Do they make any noise ???
No
Does it fit for 2022 accord 2.0 t bro.?
10th gen for sure possibly 11th
What size did you get?
1 inch
What size are those
25mm /1''
Was this stock suspension?
Yes
What size spacers ?
25mm ~ 1 inch
Shoot the link for the spacers fam
www.ebay.com/itm/313617446478
@@JDUB2580UA-cam good looking 🫡
will this fit with my accord 2022?
Yes it will all tenth generations with sport wheels at least