A bit trickier with the bottom drawers there. I made some triggered lights in my paj Titan drawers, also with the fridge slide. Not so easy on the fridge slide. Need to find a better solution for the wires that coil behind the slide, as I mounted strips on the underside of the fridge slide brackets. He made it look easy, as the trigger has plenty of room on that top drawer he has.
hey mate did you work this out? I’ve just run into the same issue. No where to route the LED wiring due to the fridge slide brackets blocking the way. Cheers
@@meerkat731 Sorry it's been a while. I can't remember what I ended up doing. I do recall that I had a coiled cord for power to a set of the LED strips in the back that ended up breaking or getting shredded. I recall running a small positive wire along a channel, and in hindsight shouldn't have simply super glued it in a rush which I think caused the cable plastic to go brittle. I also recall putting LEDs on the middle brace bar too for more light but the drawers come out further. Rushed job.
Anyone know how to replace the draw latches without removing drawers from vehicle? My tongue dropped out but I got shelves on top of drawers that bolt to my canopy roof, PITA to remove drawers its a whole day job.
That's so quick it's really easy also and keep it up with the stuff mate
Would be cool if it just came standard with the draw. As well as a locking mechanism to keep it from closing on itself.
Hi its nice idea. Could you please help about the switch wiring. I bought same switch. Where +ve and -ve will go. Thanks
A bit trickier with the bottom drawers there. I made some triggered lights in my paj Titan drawers, also with the fridge slide. Not so easy on the fridge slide. Need to find a better solution for the wires that coil behind the slide, as I mounted strips on the underside of the fridge slide brackets.
He made it look easy, as the trigger has plenty of room on that top drawer he has.
hey mate did you work this out? I’ve just run into the same issue. No where to route the LED wiring due to the fridge slide brackets blocking the way. Cheers
@@meerkat731 Sorry it's been a while. I can't remember what I ended up doing. I do recall that I had a coiled cord for power to a set of the LED strips in the back that ended up breaking or getting shredded. I recall running a small positive wire along a channel, and in hindsight shouldn't have simply super glued it in a rush which I think caused the cable plastic to go brittle.
I also recall putting LEDs on the middle brace bar too for more light but the drawers come out further. Rushed job.
Anyone know how to replace the draw latches without removing drawers from vehicle? My tongue dropped out but I got shelves on top of drawers that bolt to my canopy roof, PITA to remove drawers its a whole day job.
What glue do you recommend? Been trying to glue your strip light to my awning but nothing seams to stick.
Steven Christian can a small zip tie do it?
i use silicon, tape it up until the silicon dries
good bit of info, thanks
Glad it was helpful!
Cheers, Chad
THANK YOU FOR DETAIL VIDEO
You bet!
Cheers, Chad
First! Awesome idea!
First reply!
4WD Supacentre can I recommend doing a video on a 12v board in a wagon?
@@Spudsoffroad Absolutely, it's on the list! Hopefully get to it soon!
Cheers,
Cahn
Man that was a fuck around ey. lol
Where can we buy the switches??
Jaycar
Alex Pav I have tried and they do not have it
@@mozzieridd3074 super cheap auto
I used reed switches, much easier...