First time I made window frames for my shed I deliberately tried to leave a 3mm gap all around to allow for expansion but it was still tight in places! The look on your face when you suggested moving the windows on your own 😂. Keep up the great work as you are on the home run and all these technical parts are the fun buts albeit mentally taxing and nerve racking. Steve's boat looks all anti-fouled and ready to go 👌🏼
Hello Michèle, carpentry construction is a rather complex operation. The result is quite successful. Good continuation Michele. See you soon 🙏♥️♥️♥️♥️♥️💋
I've built several framed windows. And I've found that applying marine grade silicone sealer to the edges not only stops water intrusion, but adds a ton of strength to the entire assembly. Nice craftsmanship!
Nice work Michele. Better than I could do. Nice to see the fur babies, and Dad again. Warms my heart seeing you and Clyde interact. As always, be safe lady.
Good job kiddo..... make sure you get lots of help transporting and installing them. I've been a building contractor for 50 years.....and your doing a good job.
The videos are amazing and informative. I enjoy all the projects with all the ups and downs presented. Your cabin is beautiful and coming along nicely.
Still enjoying each new episode and still trying to 'binge' catch up on all the past episodes! I wish I would have found your channel when you first started this endeavor. Besides your ability to do just about almost anything you put your mind to, you excel at improvising, persevering, diggin' in when needed. The windows look fine. I look forward to see your vision come to fruition. Your episodes are motivating to many of us.
I love your vids because it lets me relive some of my early adventures building shops and studios. In my last two studios, I chose not to have windows on the ground floor because of the ease of entry any window affords. You and I won't break a glass to get in because we then have to fix it, but a thief does not have that worry lol! And musical equipment is hock shop heaven. So I used a poly carbonate and put a double pane of it, one on each side of the 3" 1 by in the triangles formed by the profile of the roof since I did not put a ceiling per se in the rooms. I let the ceiling take the v shape of the roof thus forming two right triangle back to back such as you are doing. Since I was building mostly alone, there would have been no way for me to lift a double panel pre constructed window assembly 4 feet high and 8 feet wide. So I just let the triangles form when framing and lined the triangle with a 3" 1 by. I then painted it. I was able to lift the single triangle poly carbonate (chosen because it is hard to break) into the opening and using some 3/4 by 3/4 trim that I painted before I put it up (that way I did not get paint on the window. Glass is one thing to clean because you can use a razor, but poly carbonate will scratch), I trimmed in the windows on each side of the 3" 1 by. Worked like a charm (though cutting it exactly to fit was a challenge, but we did it). And then there's the animals.......... You are a special lady!
I almost went the route of polycarbonate, but because it scratches I couldn’t bring myself to do it. Then I thought single pane of glass - but I figured if this cabin was going to be more of a place I will go to in fall/winter/spring, I will appreciate the double pane thermal barrier up where I’m sleeping. I kind of figured that no matter what (framed or not), those windows will be a 2 person job, so I chose to go the beefier/‘better’ route. I think that I will be thankful for this down the road 😁🤞
@@michygoss7148 Wise to get help on that! And I struggled with the scratch decision as well, but in the end realized I pretty much had to go the lighter route. As it turns out, 20 years down the road, since the windows are well above the height of the door, they have not suffered any distress and because I needed to isolate the outside sounds, my double "glass" is 3 inches apart. But I did use a lot of care in not getting anything on them during installation or thereafter. It's amazing how well it all worked. I used sound insulation for my in the wall insulation and even right next to a busy highway, we never had any bleed from the outside sound. Good luck with the install. You are getting SOOOOOOO close! And that view!!!!!!! Hug the animals for me!!
@@BirdYoumans if it was a window I wouldn’t have access to by touch then I would absolutely have done the plexiglass route. But because I will be up in the loft and likely have condensation on the window, and have to wipe it, I figured there would be scratches pretty early on. So to clarify- you did 2 layers of plexiglass with 3” in between? I had thought to do that but would have about 5” due to the size of my beam, but I was talked out of that because of condensation being able to form on the inside of those panels. Anyway, I hope that these windows last my lifetime !! 🤞🤞
@@michygoss7148 I think you chose wisely. Our climates are quite different since I lived in GA at that time. Doesn't get quite as cold here as where you are. Never paid attention to condensation, but don't remember any issues. I'm in NC now and my little studio here I did the same thing to. I'll have to pay attention and see about the condensation. Thanks for pointing that out. and yes, two sheets 3" apart
@@BirdYoumans wow, because that’s exactly what I wanted to do. Thought that the 5” air gap would add an insulating factor but my carpenter friend mentioned the condensation potential on the inside of those panels (which you’d never be able to get rid of). That was a deciding factor for that. So yes - I do think (well, more like I do hope) that I made the right decision!
Morning Michelle you always make my day when you post a new video, nice work on the window framing, but I have to say you're drop-dead gorgeous in this video
Ok. I’m actually going to film and post me doing the second window because I think it’s worth sharing the mistakes and re-doing some things better for the second one. 😊
So glad to see the dogs again ! The one thing your life and professional experience has told you is that recovering never is procrastinating. Maybe boring and/or annoying but never procrastinating ! You did a fine job with the windows (including the learning curve) looking forward to see them on the cabin And congratulations for the watering of the boat !
Good Sunday morning Michelle. Glad to see you're doing well - fit and fantastic...and you're making progress on your projects. Those custom windows you're building are no doubt going to fit perfectly. That being said, thanks again for a chronicle of your adventures there in your tiny cabin on a cliff. ❤❤❤❤😊😊👍👍🌻🌻😁😁
What a crafty woman. It is fun to watch her run through her thought process and application of her ideas. What a great woman. Loves dogs, stunningly beautiful and intelligent enough to work and adjust on the fly. She is amazing.
Argh. Making windows. I am now dealing with the same problem. I have no idea where to start so thanks for doing it first. LOL You learn and then I learn. Thank you
For this being your first window you did a mighty fine job, Dan Ross summed up pretty much was I was thinking as well. The next window you should be able to master it.
Happy Sunday Michelle and Steve! I really enjoyed the video. It always makes me smile seeing the pets. I am very excited about your adventures on the sea. I like how the window turned out. You learned so much and it will be great to see how the other one works out. God bless you both and prayers for safe travels!
Really nice frame. I knew you would figure it out and now it's your personal design. That's the reason you are trying to do as much as possible on your on. I'd hire you in a minute.
Mounting the glass windows with rubber blocks to cushion the glass is what a friend of mine has done ! Gaps filled with silicone to seal and protect them made a lot of sense to me ! It’s a project and looks like you are doing very well !
It was definitely too tight of a fit, which wasn’t what I was aiming for. I had wanted to put the foam stripping all the way around the window to give it that cushioning but I wasn’t able to execute it this time. For the second window I will make sure to do it a bit better 🤞
@@michygoss7148 You did very well , you are better at it then i’am ! Some years ago I installed a window in a wood frame and not long , few months and the window cracked down the middle !! Oh gawd now I have to do the second window, I just used caulk all the way around so the second glass window had some cushion and it’s fine to this day ! Structures move a little bit over years and settle differently! Kinda scary stuff working with glass !
Getting the windows to the cabin will be 'locker move' like, must be heavy! One of the things I Iove about you and your videos is your candid description of your process and thinking, including mistakes. Also, you are a framing hammer nailing beast!
You solve the puzzles nicely, I watch it admiringly. Even though you say hard to solve, it still seems like a small challenge. Thanks for all the videos, they have been the most interesting of all. Sorry if there are any typos, English is not my language.
Michelle, so nice to see you doing your window as I may be facing my first window as well. My Mom puttied all of the windows in the house I grew up in and became the expert in that category of work. I'm glad you showed Clyde because I sort of miss him. He's such a character. If I pass from this earth and come back reincarnated I want to come back as Clyde so I can have the arms of a beautiful woman like you around my neck. You've got me motivated to get back to my construction project! Great job! Thanks for Sharing!
Always good watching your work and becoming aware about how it is always a manner of what/how/researching/learning about a procedure to achieve a needed result and working on it...for every thing....determination is also. Must🧐💫
Very nicely done, Michelle! I like the way you take on projects, not even knowing how you're going to accomplish the task. And you persist until you make it work. The windows turned out great! Have a nice Sunday!
Great video Michelle! That was a daunting task building those frames. At least in my mind haha. Glass and I have never gotten along all that well. Sounds like you'll be really off-grid for a bit while you and Steve sail your new boat home. I hope you get a chance to document some of your trip. That will be a true odyssey. One that should be memorialized for later years. You guys have such a wonderful life. But I have to be honest, of everything in the video, and I mean it, it was a great video, watching you love on your dog and how he buried his head in your chest for more loving was the real heart melter. So much unconditional love dogs offer us. That they do not live long enough is the most devastating tragedy. But I try to not think about that stuff, just the other parts. I'm not going to say just good parts, because when my boy is naughty it's still adorable to me. All in all, you did a wonderful job on this episode. In case you do not post again before you leave, God's speed on your trip home. Hope to hear from you soon. =)
The day after Clyde was so snuggly and sticking around home, he took off for a whole day. (11 hours). No GPS collar on because it’s been months that he’s stuck around. I did spent a few hours trying to find him, and resigned to the fact that he’d probably spend the night out and I would spend the next day looking for him. BUT - just before 8pm he came strolling through the yard and I was SO relieved. He now gets to wear his GPS collar every day, every time he goes outside 😬
hello Steve and Michelle. my that boat looks mighty nice. making window frames is an art. yours are ok by me. thanks for giving the doggies lots of love. i hope that you recover soon. please enjoy your holiday.
@@michygoss7148 sending your good european vibes and a glass of your favorite wine to expedite your recovery. please take care. as i related before, my project nearly killed me too. it's a grind, but don't let it grind you. those puppies need their afternoon paw massages 😛
Great job, good on you for tackling it. Everything turns to dust in the end so to you so say, You are another step closer to your little cabin in the woods. I worked on mine this weekend as well, like you it’s not perfect but it’s mine, and I built it. Cheers
Well I think you did an awesome job on the window frame little bit of mistake who cares it's a one-of-a-kind and Clyde is so darn cute Steve's boat is looking really good I think you're going to enjoy that at your home but as always another good video I liked it thank you very much for all your hard work at putting the videos together I think the windows is going to look beautiful in the cabin I will see you on the next one😂😂😅😅😮😮😢😢😊😊😊😊❤❤😍
Another great video… Good choice with the windows, they look great. I love your just do it and getter done attitude. Can’t wait for the next video.. Wally
Great illustration of what you may have wanted and how to work with what you have. I think that the end result looks great. I will be happy to see them installed. -- cheers
Great work Michelle. Framing those windows would have been tricky…even for carpenters. I think you did great. I have used Mulco caulking on several cabins and our house. If you can buy that locally, I would highly recommend using it. It is easy to apply and remains elastic for decades. All of the contractors building cottages here use that as well. Keep up the videos!
Michy, one thing to remember about caulk is it is meant to keep vapor and water from intruding. Example, the critical caulk on a shower door is on the inside not the outside; it keeps water and vapor from intruding on the non-shower area of the bathroom. You want to keep the water from escaping the shower. Most of the time when people caulk on the exterior of the door it is to cover…er…not ideal workmanship. If you caulk outside only eventually the water will find a weak spot and get out. Caulk both sides and you risk trapping water in between (mold). Same with the windows and doors. The critical caulk is on the exterior and the interior does not need caulk unless for appearance (hide gaps etc.).
Ok, so my plan is to caulk the outside only (yes, to cover up my less and ideal gap). So what I think you’re saying is to only do the outside and nothing from the inside. ? These windows will have pretty decent protection from the overhang, so hopefully they won’t get soaked often.
@@michygoss7148 It doesn't matter if the rain can reach them the air is moist enough to cause damage on windows. Thats why it's important to apply it outside.
@@michygoss7148 Just a note regarding Silicone caulking I had my shower door silicone caulked on both sides of the glass for 21 years and it never leaked but it did show signs of mildew under the caulk so maybe it's good to do just one side?
“Off on A Boondoggle” is correct about the caulking. You also need to have a way for any moisture that gets under the window frame to be able to drip out. Ask your carpenter buddy about this. Caulking ALWAYS fails over time. A drip rail or drip cap, even on the slope of the triangular window would be good I think. You are doing a great job. Cedar is a great wood for window frames. Cheers from Tokyo
It’s simple - most important area to caulk is where the water hits - inside the shower, outside the windows. The rest can be cosmetically finished off.
Hi Michelle. On the same theme as the title...you have huge balls making your own windows. I love how you just take on jobs that you've never done before a make the best of it. Get er' done! I guess the next big adventure will be getting the windows to the cabin. You are to be admired.....goddess! Toodles!
I love your heart and tenacity on this window frame out. Can't imagine getting it down that hill next and then installed. That will be a challenge all on it's own. Just a fellow "Crazy Canuck". Well done
Great job on the windows Michelle! You always work things out in the end.. Caulk outside and just butt the inside trim up to the window with maybe a rubber gasket inside to deflect any condensation away from the window inside eg. To stop it running down into the Frame where it meets the glass. But the frames you built look great! Well done! And the boat at the end is looking pretty special i bet thats going to be something else when you get out there and see it in person! Have a great week 👍🏴🇬🇧
Awesome video can’t wait to see when you get these windows in cabin I’m getting kinda like you be glad when you get done so you can get on the mill to cut wood for next project 😊😊😊 I love watching mill videos you take care God bless Michy
Nice job Mich. Don't be scared to paint onto the glass as well to fill up the potential void between the quad and glass, this will also help protect from the elements getting in. You could tape off and leave a 1/8 of an inch (Couple of mm) between the glass and the quad. When the paint dries, run a Sharp blade around and next to the glass and quad, then use a sharp scraper to get the rest of the paint off the glass. Will look like a bought one!
@Michygoss OKAY, I need to down load it first. And I am about to jump into the shower. I made A raised bed today in the yard 18'x35'' Made of 2x6 wood I got from the home depot I like the way you do it from trees around your home. Chat soon . Thank You ❤❤❤
Hi Michele. Your hounds sure have it good with your love. Michy Honey I do woodworking and am impressed with your window frames! Great job!!! Great video watching you figure out how to frame them. As always you are absolutely gorgous. Stay safe and warm. G
Dogs need their peeps, all of them. At least it's their belief, yet they realize we fail so they assume an indulgent attitude. As you say, it seems to work out in the end. In this case, it's partly true. The rule is to leave a 1/4" gap between the frame and glass, so 1/8th all around. Then use window putty to separate the glass from the wood. If you let it set and then paint, the putty doesn't fully dry out. All of this creates what you want: a soft
For someone who has never made window frames you did a pretty damn good job of it. They are looking good...!! Now getting them down the cliff..... The boat is looking good. It's going to be quite an adventure. What a lucky guy old Clyde is. He gets lots of snuggles from Michycrowtalker.
Nice job on the window. That's a very good first time effort on a complex window. When you bring the windows to the cabin, I'd carry one at a time. As for your dog barking on the mountain, he obviously smelled something.
the thing that keeps me watching you is that you have the same spirit that I have which go forward, if you don't know something figure it out as you go. So many people are set in their ways and limitations and never push it. Way too many........ You are pushing your knowledge and abilities with every episode. I am the same way building some structures that friends are going what? My sawmill shed is under construction 16' by 56' at the roof. My workshop is 18' by 48' which is waiting on the sawmill shed to be finished so that lumber can goes towards it. Then come the mega garage again waiting on the sawmill shed. Trying to accomplish within IBC but at the same time, as an Engineer allowed to sign off on local conditions. I realize your not trying to hit the IBC requirements, but its so much fun watching you figure things out none the less. The window issue is great and makes me rethink somethings on several issues with the work shop and garage. So plus to you making the engineer rethink things. AND love the fur babies.
Precious moment with Bear wanting some “love.” Dogs are the best. Thank you for showing us.
you are doing fine, caring for yourself and your family, KNOWING there are folks that love and support you. you are doing fine.
You have the fight of a carpenter. Good job you killed it .
First time I made window frames for my shed I deliberately tried to leave a 3mm gap all around to allow for expansion but it was still tight in places! The look on your face when you suggested moving the windows on your own 😂. Keep up the great work as you are on the home run and all these technical parts are the fun buts albeit mentally taxing and nerve racking. Steve's boat looks all anti-fouled and ready to go 👌🏼
What could anyone ever say in the comment that would justify these moments you share. You are a good egg.
Hello Michèle, carpentry construction is a rather complex operation. The result is quite successful. Good continuation Michele. See you soon 🙏♥️♥️♥️♥️♥️💋
Great shot of Steve cutting between the Black dog and Clive
Don’t forget to take us along on your adventures at sea. Love the boat. ❤
Its always hard to say goodbye to the ones we love the most. Learned this from experience. Cabin is looking so great! love those new windows!
I've built several framed windows. And I've found that applying marine grade silicone sealer to the edges not only stops water intrusion, but adds a ton of strength to the entire assembly. Nice craftsmanship!
Nice work Michele. Better than I could do. Nice to see the fur babies, and Dad again. Warms my heart seeing you and Clyde interact. As always, be safe lady.
Good job kiddo..... make sure you get lots of help transporting and installing them. I've been a building contractor for 50 years.....and your doing a good job.
Wish I could find a lady that loves nature like you do.. and the passion of building off grid and liking there as well ❤
I think the windows turned out fine. As I used to say, “good enough for government work.” Looks great little lady, keep going. James
The videos are amazing and informative. I enjoy all the projects with all the ups and downs presented. Your cabin is beautiful and coming along nicely.
The wonderful world of obtuse angles...good job.
Ya - angles I’ve never thought about since grade 10 😂
Still enjoying each new episode and still trying to 'binge' catch up on all the past episodes! I wish I would have found your channel when you first started this endeavor. Besides your ability to do just about almost anything you put your mind to, you excel at improvising, persevering, diggin' in when needed. The windows look fine. I look forward to see your vision come to fruition. Your episodes are motivating to many of us.
Clyde is liking him some lovins 👍. Nice video michy. Look forward to Sundays to watch ya every week !!!
Duck is looking good. More if that coming soon enough I'm looking forward to it.
I hope u let Steve help u get them down and in place but great job . I look forward to your videos every week😊
I love your vids because it lets me relive some of my early adventures building shops and studios. In my last two studios, I chose not to have windows on the ground floor because of the ease of entry any window affords. You and I won't break a glass to get in because we then have to fix it, but a thief does not have that worry lol! And musical equipment is hock shop heaven. So I used a poly carbonate and put a double pane of it, one on each side of the 3" 1 by in the triangles formed by the profile of the roof since I did not put a ceiling per se in the rooms. I let the ceiling take the v shape of the roof thus forming two right triangle back to back such as you are doing. Since I was building mostly alone, there would have been no way for me to lift a double panel pre constructed window assembly 4 feet high and 8 feet wide. So I just let the triangles form when framing and lined the triangle with a 3" 1 by. I then painted it. I was able to lift the single triangle poly carbonate (chosen because it is hard to break) into the opening and using some 3/4 by 3/4 trim that I painted before I put it up (that way I did not get paint on the window. Glass is one thing to clean because you can use a razor, but poly carbonate will scratch), I trimmed in the windows on each side of the 3" 1 by. Worked like a charm (though cutting it exactly to fit was a challenge, but we did it). And then there's the animals.......... You are a special lady!
I almost went the route of polycarbonate, but because it scratches I couldn’t bring myself to do it. Then I thought single pane of glass - but I figured if this cabin was going to be more of a place I will go to in fall/winter/spring, I will appreciate the double pane thermal barrier up where I’m sleeping.
I kind of figured that no matter what (framed or not), those windows will be a 2 person job, so I chose to go the beefier/‘better’ route. I think that I will be thankful for this down the road 😁🤞
@@michygoss7148 Wise to get help on that! And I struggled with the scratch decision as well, but in the end realized I pretty much had to go the lighter route. As it turns out, 20 years down the road, since the windows are well above the height of the door, they have not suffered any distress and because I needed to isolate the outside sounds, my double "glass" is 3 inches apart. But I did use a lot of care in not getting anything on them during installation or thereafter. It's amazing how well it all worked. I used sound insulation for my in the wall insulation and even right next to a busy highway, we never had any bleed from the outside sound. Good luck with the install. You are getting SOOOOOOO close! And that view!!!!!!! Hug the animals for me!!
@@BirdYoumans if it was a window I wouldn’t have access to by touch then I would absolutely have done the plexiglass route. But because I will be up in the loft and likely have condensation on the window, and have to wipe it, I figured there would be scratches pretty early on.
So to clarify- you did 2 layers of plexiglass with 3” in between? I had thought to do that but would have about 5” due to the size of my beam, but I was talked out of that because of condensation being able to form on the inside of those panels.
Anyway, I hope that these windows last my lifetime !! 🤞🤞
@@michygoss7148 I think you chose wisely. Our climates are quite different since I lived in GA at that time. Doesn't get quite as cold here as where you are. Never paid attention to condensation, but don't remember any issues. I'm in NC now and my little studio here I did the same thing to. I'll have to pay attention and see about the condensation. Thanks for pointing that out. and yes, two sheets 3" apart
@@BirdYoumans wow, because that’s exactly what I wanted to do. Thought that the 5” air gap would add an insulating factor but my carpenter friend mentioned the condensation potential on the inside of those panels (which you’d never be able to get rid of). That was a deciding factor for that.
So yes - I do think (well, more like I do hope) that I made the right decision!
Doing great lady!!! those will out last us all. your puppies are more than pets. They are family no matter what anyone else may say.
Morning Michelle you always make my day when you post a new video, nice work on the window framing, but I have to say you're drop-dead gorgeous in this video
Well you just taught THIS old dog a new trick! Planning on framing my own windows coming up..
Ok. I’m actually going to film and post me doing the second window because I think it’s worth sharing the mistakes and re-doing some things better for the second one. 😊
"There's something about Mary" 🤣🤣🤣
You're hilarious, and that window looks fantastic! 👍😁
That dog is the star of the show for sure! :) Love em!!!
Please be careful and safe in your travels, love y’all ❤😊
So glad to see the dogs again !
The one thing your life and professional experience has told you is that recovering never is procrastinating. Maybe boring and/or annoying but never procrastinating !
You did a fine job with the windows (including the learning curve) looking forward to see them on the cabin
And congratulations for the watering of the boat !
Good Sunday morning Michelle. Glad to see you're doing well - fit and fantastic...and you're making progress on your projects. Those custom windows you're building are no doubt going to fit perfectly. That being said, thanks again for a chronicle of your adventures there in your tiny cabin on a cliff. ❤❤❤❤😊😊👍👍🌻🌻😁😁
What a crafty woman. It is fun to watch her run through her thought process and application of her ideas. What a great woman. Loves dogs, stunningly beautiful and intelligent enough to work and adjust on the fly. She is amazing.
Argh. Making windows. I am now dealing with the same problem. I have no idea where to start so thanks for doing it first. LOL You learn and then I learn. Thank you
Good job! And a good example to us all of making do with what you have to hand and adaptation.
For this being your first window you did a mighty fine job, Dan Ross summed up pretty much was I was thinking as well. The next window you should be able to master it.
Happy Sunday Michelle and Steve! I really enjoyed the video. It always makes me smile seeing the pets. I am very excited about your adventures on the sea. I like how the window turned out. You learned so much and it will be great to see how the other one works out. God bless you both and prayers for safe travels!
brilliant job on the window , you are doing really well .
One simple and essential woodworking tool to make things easier next time ... a sliding T-Bevel. ♦
I did not know that installing a window is such a complicated process. Thank you for showing
Windows look awesome. Should be a nice look for the cabin
Really nice frame. I knew you would figure it out and now it's your personal design. That's the reason you are trying to do as much as possible on your on. I'd hire you in a minute.
Hey Michelle you worked hard and those pyramid windows look Awesome!!!!!!
I love this … more and more progress. Impressed Mich.
Nice job on the windows, perfect for your cabin. Your teal colored jacket goes very well with those beautiful eyes.
Mounting the glass windows with rubber blocks to cushion the glass is what a friend of mine has done !
Gaps filled with silicone to seal and protect them made a lot of sense to me !
It’s a project and looks like you are doing very well !
It was definitely too tight of a fit, which wasn’t what I was aiming for. I had wanted to put the foam stripping all the way around the window to give it that cushioning but I wasn’t able to execute it this time. For the second window I will make sure to do it a bit better 🤞
@@michygoss7148 You did very well , you are better at it then i’am !
Some years ago I installed a window in a wood frame and not long , few months and the window cracked down the middle !! Oh gawd now I have to do the second window, I just used caulk all the way around so the second glass window had some cushion and it’s fine to this day !
Structures move a little bit over years and settle differently!
Kinda scary stuff working with glass !
I loooove that Helmsman clear-coat!
You impress the heck outa me. I can picture myself trying that, getting frustrated and end up with broken glass. You do fine work.
great job on the window(s) Michy, those are really quite big, I'm gonna hold my breath as you send them down the zip line. whew!
I know!!! 🫣
Getting the windows to the cabin will be 'locker move' like, must be heavy! One of the things I Iove about you and your videos is your candid description of your process and thinking, including mistakes. Also, you are a framing hammer nailing beast!
Starrett makes a great angle finder. Makes life way easier.
You solve the puzzles nicely, I watch it admiringly. Even though you say hard to solve, it still seems like a small challenge. Thanks for all the videos, they have been the most interesting of all. Sorry if there are any typos, English is not my language.
Michelle, so nice to see you doing your window as I may be facing my first window as well. My Mom puttied all of the windows in the house I grew up in and became the expert in that category of work. I'm glad you showed Clyde because I sort of miss him. He's such a character. If I pass from this earth and come back reincarnated I want to come back as Clyde so I can have the arms of a beautiful woman like you around my neck. You've got me motivated to get back to my construction project! Great job! Thanks for Sharing!
Always good watching your work and becoming aware about how it is always a manner of what/how/researching/learning about a procedure to achieve a needed result and working on it...for every thing....determination is also. Must🧐💫
Very nicely done, Michelle! I like the way you take on projects, not even knowing how you're going to accomplish the task. And you persist until you make it work. The windows turned out great! Have a nice Sunday!
Great video Michelle! That was a daunting task building those frames. At least in my mind haha. Glass and I have never gotten along all that well. Sounds like you'll be really off-grid for a bit while you and Steve sail your new boat home. I hope you get a chance to document some of your trip. That will be a true odyssey. One that should be memorialized for later years. You guys have such a wonderful life. But I have to be honest, of everything in the video, and I mean it, it was a great video, watching you love on your dog and how he buried his head in your chest for more loving was the real heart melter. So much unconditional love dogs offer us. That they do not live long enough is the most devastating tragedy. But I try to not think about that stuff, just the other parts. I'm not going to say just good parts, because when my boy is naughty it's still adorable to me. All in all, you did a wonderful job on this episode. In case you do not post again before you leave, God's speed on your trip home. Hope to hear from you soon. =)
The day after Clyde was so snuggly and sticking around home, he took off for a whole day. (11 hours). No GPS collar on because it’s been months that he’s stuck around. I did spent a few hours trying to find him, and resigned to the fact that he’d probably spend the night out and I would spend the next day looking for him. BUT - just before 8pm he came strolling through the yard and I was SO relieved. He now gets to wear his GPS collar every day, every time he goes outside 😬
hello Steve and Michelle. my that boat looks mighty nice. making window frames is an art. yours are ok by me. thanks for giving the doggies lots of love. i hope that you recover soon. please enjoy your holiday.
Each day I’m getting better, thank you!
@@michygoss7148 sending your good european vibes and a glass of your favorite wine to expedite your recovery. please take care. as i related before, my project nearly killed me too. it's a grind, but don't let it grind you. those puppies need their afternoon paw massages 😛
Great job, good on you for tackling it. Everything turns to dust in the end so to you so say, You are another step closer to your little cabin in the woods. I worked on mine this weekend as well, like you it’s not perfect but it’s mine, and I built it. Cheers
What a Lady! Amazing…Love watching your videos!
Well I think you did an awesome job on the window frame little bit of mistake who cares it's a one-of-a-kind and Clyde is so darn cute Steve's boat is looking really good I think you're going to enjoy that at your home but as always another good video I liked it thank you very much for all your hard work at putting the videos together I think the windows is going to look beautiful in the cabin I will see you on the next one😂😂😅😅😮😮😢😢😊😊😊😊❤❤😍
So beautiful and creative as always..good work!!
Another great video… Good choice with the windows, they look great. I love your just do it and getter done attitude. Can’t wait for the next video.. Wally
Great illustration of what you may have wanted and how to work with what you have. I think that the end result looks great. I will be happy to see them installed. -- cheers
You have a gift hen it comes to woodworking project problem solving. Another great video!
I love that chop saw, I have the same one. The action of that saw is so smooth. Great job on ur videos
I can see that the window is a good reflection of your emerging angling skills😁
Thanks again Michelle for sharing the adventure. You nailed it with the window
Great work Michelle. Framing those windows would have been tricky…even for carpenters. I think you did great. I have used Mulco caulking on several cabins and our house. If you can buy that locally, I would highly recommend using it. It is easy to apply and remains elastic for decades. All of the contractors building cottages here use that as well. Keep up the videos!
Oh, the joy of the Happy Pups! "Bark! Bark!!"
Michy, one thing to remember about caulk is it is meant to keep vapor and water from intruding. Example, the critical caulk on a shower door is on the inside not the outside; it keeps water and vapor from intruding on the non-shower area of the bathroom. You want to keep the water from escaping the shower. Most of the time when people caulk on the exterior of the door it is to cover…er…not ideal workmanship. If you caulk outside only eventually the water will find a weak spot and get out. Caulk both sides and you risk trapping water in between (mold). Same with the windows and doors. The critical caulk is on the exterior and the interior does not need caulk unless for appearance (hide gaps etc.).
Ok, so my plan is to caulk the outside only (yes, to cover up my less and ideal gap). So what I think you’re saying is to only do the outside and nothing from the inside. ? These windows will have pretty decent protection from the overhang, so hopefully they won’t get soaked often.
@@michygoss7148 It doesn't matter if the rain can reach them the air is moist enough to cause damage on windows. Thats why it's important to apply it outside.
@@michygoss7148 Just a note regarding Silicone caulking I had my shower door silicone caulked on both sides of the glass for 21 years and it never leaked but it did show signs of mildew under the caulk so maybe it's good to do just one side?
“Off on A Boondoggle” is correct about the caulking.
You also need to have a way for any moisture that gets under the window frame to be able to drip out.
Ask your carpenter buddy about this.
Caulking ALWAYS fails over time.
A drip rail or drip cap, even on the slope of the triangular window would be good I think.
You are doing a great job.
Cedar is a great wood for window frames.
Cheers from Tokyo
It’s simple - most important area to caulk is where the water hits - inside the shower, outside the windows. The rest can be cosmetically finished off.
Congratulations on a job well done! I love that you ‘make’ the time to interface with the pets!
I spend a lot of my days petting the pets! ❤
I think the window came out great. Good job! Nice boat by the way. You guys should have a lot of fun on your ocean voyage.
Hi Michelle. On the same theme as the title...you have huge balls making your own windows. I love how you just take on jobs that you've never done before a make the best of it. Get er' done! I guess the next big adventure will be getting the windows to the cabin. You are to be admired.....goddess! Toodles!
I know - that is definitely gonna be a 2 person job!!!
Love those Clydester hugs! What a cool doggie. Window looks awesome! So does the boat, wow!
Great job on the window, figuring those angles out always stumps me too. God bless you and Steve and family!
Your a step above my window talents pointing and glazing is as far as I've ever gotten😬✌
"There's something about Mary"...classic!!! 😂😂😂Great video! You're truly an amazing woman!
I love your heart and tenacity on this window frame out. Can't imagine getting it down that hill next and then installed. That will be a challenge all on it's own. Just a fellow "Crazy Canuck". Well done
I know. Framed or not, those windows are gonna be a 2 person job. Which just might have to wait until we are home. 😊
I think it came out quite nice, especially for a first try with no prior experience or instruction. Good Job.👍
The window is fabulous, great job on the framing.
Very talented individual....love the dogs 🦴
I must say I think you do a much better job building then most men. Take Care
Looking great Have a wonderful day everyone ❤📹👍😉
Great job on the windows Michelle!
You always work things out in the end..
Caulk outside and just butt the inside trim up to the window with maybe a rubber gasket inside to deflect any condensation away from the window inside eg. To stop it running down into the Frame where it meets the glass. But the frames you built look great! Well done!
And the boat at the end is looking pretty special i bet thats going to be something else when you get out there and see it in person!
Have a great week 👍🏴🇬🇧
Awesome video can’t wait to see when you get these windows in cabin I’m getting kinda like you be glad when you get done so you can get on the mill to cut wood for next project 😊😊😊 I love watching mill videos you take care God bless Michy
Nice job Mich. Don't be scared to paint onto the glass as well to fill up the potential void between the quad and glass, this will also help protect from the elements getting in. You could tape off and leave a 1/8 of an inch (Couple of mm) between the glass and the quad. When the paint dries, run a Sharp blade around and next to the glass and quad, then use a sharp scraper to get the rest of the paint off the glass. Will look like a bought one!
Just be very careful not to scratch the glass.
In my section of the southeastern US 'can't' and 'paint' rhyme. There's an expression, "Caulking and paint fix what the carpenter can't." 😊
Nice Work . ! You'r getting there . !
That window looks heavy. Hope everything goes fine getting them down to the cabin!
🤩🤩 Stop Beating Yourself Up, Your doing everything great.
WOW! You did a Great job on the window frame . You are amazing . you'r so beautuful and I love your eyes!🙂
@Michygoss OKAY, I need to down load it first. And I am about to jump into the shower. I made A raised bed today in the yard 18'x35'' Made of 2x6 wood I got from the home depot I like the way you do it from trees around your home. Chat soon . Thank You ❤❤❤
You are doing a Awesome job. 😀😀😀
Hi Michele. Your hounds sure have it good with your love. Michy Honey I do woodworking and am impressed with your window frames! Great job!!! Great video watching you figure out how to frame them. As always you are absolutely gorgous. Stay safe and warm. G
Dogs need their peeps, all of them. At least it's their belief, yet they realize we fail so they assume an indulgent attitude.
As you say, it seems to work out in the end. In this case, it's partly true. The rule is to leave a 1/4" gap between the frame and glass, so 1/8th all around. Then use window putty to separate the glass from the wood. If you let it set and then paint, the putty doesn't fully dry out. All of this creates what you want: a soft
For someone who has never made window frames you did a pretty damn good job of it. They are looking good...!! Now getting them down the cliff..... The boat is looking good. It's going to be quite an adventure. What a lucky guy old Clyde is. He gets lots of snuggles from Michycrowtalker.
A TON! 🤭
My history of compound angle cuts is strewn with oddly cut firewood planks 😂. Hi from Cheryl and Lawrence down here in Georgia 👋.
And I'm already nervous about you getting those windows down to the cabin. I'll be relieved when they're installed.
That makes 2 of us.
Thanks again Michelle for another great video.
Your cabin is looking awesome! Very nice windows! Your innuendo video titles crack me up! 😂
😜🤭
Great job!! I love watching your videos. Also beautiful eyes u must add. Keep it the great job.
Nice job on the window. That's a very good first time effort on a complex window. When you bring the windows to the cabin, I'd carry one at a time. As for your dog barking on the mountain, he obviously smelled something.
Clyde has a thing for ‘scenting’ Riley, the black dog. So he follows Riley’s tracks barking away. It’s the cutest thing.
the thing that keeps me watching you is that you have the same spirit that I have which go forward, if you don't know something figure it out as you go. So many people are set in their ways and limitations and never push it. Way too many........ You are pushing your knowledge and abilities with every episode. I am the same way building some structures that friends are going what? My sawmill shed is under construction 16' by 56' at the roof. My workshop is 18' by 48' which is waiting on the sawmill shed to be finished so that lumber can goes towards it. Then come the mega garage again waiting on the sawmill shed. Trying to accomplish within IBC but at the same time, as an Engineer allowed to sign off on local conditions. I realize your not trying to hit the IBC requirements, but its so much fun watching you figure things out none the less. The window issue is great and makes me rethink somethings on several issues with the work shop and garage. So plus to you making the engineer rethink things. AND love the fur babies.
Awesome! You made a frame for that window!