I have just found your Channel while looking for Homemade lathes and table saws. I am very impressed with your builds. I have Subscribed to your channel as I would like to build quite a few of your projects as they are just what I am looking for. Thank you for uploading and sharing your talents.... Be safe out there. 😀👍😀👍
Very original design. I find the side without the drill to be very long. What is benefits of the micro adjustment being that long? Just trying to reduce the size for easier storage.
Very nice, But I did not notice any air vent holes in the headstock cover so the drill does not get overheated. I the drill gets overheated and the smoke gets out you will need new drill windings!
Although some components are sufficiently robust, many of them cannot withstand excessive loads, i.e. the sliding part that moves the tailstock is dramatically weak, (and why are the vertical walls inclined? Your resistance to bending will worsen! It's the lever principle!!! make them vertical and add additional ribs!) as well as boards of modest thickness perforated with a diameter very close to their thickness. This weakness could cause the part being worked to detach and cause serious personal injury, but only if the device does not catch fire first: you are using a hand drill, designed for intermittent use in a ventilated environment, in a tiny closed environment and in continuous service . The tailstock adjustment has excessive play, which can cause the workpiece to be unbalanced.... and the centrifugal force will take care of the rest... Do you have any idea that lathes almost always throw detached pieces into your face? I hope no one emulates the construction of the tool as you conceived it: it's dangerous! I'm sorry, but I came across your video by chance, and I can't allow the disclosure of dangerous objects just to earn a few bucks on the platform. People's health is more important. In Italy we have a brain-dead 10-year-old girl in a deep coma after attempting an infamous choking challenge seen on another platform (t*k-t*k). It's time we all take an active part in stopping and countering the dissemination of potentially harmful material.
Interesting built. My only concerns are your fingers. Don't wear gloves on rotating machines!!! This is so dangerous. Once a tooth from Sawblade or a Drillbit catches a part of the Gloves, they will pull your fingers or hand inside of the Tools. But what I like is the Design and easy build.
사장님은 너무나도 대단하십니다
악! 대단하십니다
사장님은 노벨상 대상입니다.
안전!제일! 이지요
더운날씨에 건강하세요!
과찬이십니다
더 열심히노력할께요
감사합니다
This is the first DIY wooden lathe video I've seen with a live center on the tailstock. Nice to see. Great video.
Thank you very much
그의 작업과 아이디어는 매우 훌륭하고 계획, 조각 및 조치를 두지 않아서 다른 지역에서 온 사람들, 특히 제 3 세계에서 왔고 기계를 살 돈이없는 사람들이 그것을 복제 할 수 있습니다.
Uno de los mejores Videos correspondientes a , "Como fabricar un Torno para Madera " , felicitaciones , Luis desde Venezuela . gracias . !!!!!!!!
하도 잘만들었어 또한번 보았습니다
건강 안전제일이지요!
감사합니다 더 열심히 할께요^^
정말 만들어보고싶은것중 하나인 목선반...멋있습니다 ㅎㅎ
감사합니다
Nice work, curious why you wouldn’t go variable speed?
Gerçekten güzel projelerin var. Tebrikler. Teşekkürler
손재주 정말 좋다
고마워 ^^
재미있게 잘 봤습니다. 엄청난 내공이 느껴지네요 👍
감사합니다 김팀장님 영상도 빠짐없이 보고있습니다^^
Хх
Х
I have just found your Channel while looking for Homemade lathes and table saws. I am very impressed with your builds. I have Subscribed to your channel as I would like to build quite a few of your projects as they are just what I am looking for. Thank you for uploading and sharing your talents.... Be safe out there. 😀👍😀👍
Thank you very much 😊 ☺ 🙏
@@Yoo-mt2qq You're very welcome my friend. 👍😀👍 I am actually watching your build video on the coffee box. Looks Amazing. :👍😀👍
Good to watch your simple and wonder creative ideas, thanks
Thank you very much 😊
기계기술이 대단하십니다
"Allah " sana güzel yetenekler vermiş. Çok güzel de kullanmışsın. Yaptıkları harika ve anlaşılır.
많은 영상 보았지만
최고의 작품이라 전합니다
감사합니다
Very nice project. What about the dimensions in order to built it?
SUPER! Thank you for sharing. Are there any blueprints Available?
Que bién que quedó, perfecto!!!!!
Thank you very much
A very fine project you Made!
Thank you very much
Very original design. I find the side without the drill to be very long. What is benefits of the micro adjustment being that long? Just trying to reduce the size for easier storage.
absolutely the best diy lathe machine i have ever watched . waiting for diy drill press !
Thank you very much
Nice job. Congrats from Brazil.
Thank you very much 😊
Genial, congratulações
Gracias
So great , amazing 👍👍
Thank you very much
Thank you for the information
Bonjour un travail extraordinaire, franchement bravooooooooooooo Par contre vous n'avez pas les plans SVP Cdlt
Parabéns ótimo trabalho 👏👏👏👏 ganhou mais um inscrito
Bravissimo 👍🏿 👏 👏 👏
이렇게도 만들수가 있군요. 오랜 경험에서 나온 실력과 아이디어의 결합인듯 합니다.
감탄스럽네요. 양쪽 핀의 높이와 중심을 서로 정확히 맞추는 방법이 궁금한데 알려주실수 있는지요? 영상에서는 잘 안보여서요
시청해주셔서 감사합니다
센터를 맞추기위해서 여러번 조립분해를 했습니다
조금씩 조금씩 깍아서 맞췄습니다
가장중요한부분이기도 합니다^^
Super clean machines tools !
Thank you very much
EXCELENTE. Como exhibición está muy bien, pero si tuviera las medidas estaría GENIAL!!!
yo también quiero las medidas excelente video
Bravo. Mi iscrivo
very goooooooood work👍👍👍👍👍👍
Thank you very much
Do you have PDF plans for your project?
Great job 👽👍
Thank you very much
와우! 솜씨가 대단하시네요 나중에 낚시장비좀 만들어 주세요 ㅎ~
낚시를 좋아하시나봐요
전 초보라서..
어떤장비가 좋을까요^^
👌
Cool Beans !
very nice!
Thank you very much
Do you have the drawings, of your proyect?
Hola saludos dede MEXICO
형님 ~ 정교함이 멋집니다..^^👍👍👍👍
замечательный токарный, только надолго ли хватит дрели
Если дрель киловаттник - выдержит.
캬..정말 천재시군요!!!
감사합니다
Замечательный станок! Чертежи на него есть?
Thank you very much
nice job
If you can add plans for your projects, that's great.
Very nice, But I did not notice any air vent holes in the headstock cover so the drill does not get overheated. I the drill gets overheated and the smoke gets out you will need new drill windings!
согласен ,и это сделать очень просто ,просверлить отверстия
چرا اندازه قطعه ها را نگفتی؟
Nice👍🏼👍🏼
Thank you very much
very detail
Thank you very much
very good
Thank you very much
Süper
Nice and clean work😊
Me at the beginning: What is this overcomplicated looking thing? Me halfway trough: 😮😮😮😮😮😮
tl;dr amazing work :D
bagus.....
👍👍👍👍👍👍👍👍
Thank you very much
, 👏👏👏
It's perfect job.
I loved it.
Thanks a lot for sharing us that.
If you can add plans for your projects, that's great.
👌👍👍
Thank you very much
Although some components are sufficiently robust, many of them cannot withstand excessive loads, i.e. the sliding part that moves the tailstock is dramatically weak, (and why are the vertical walls inclined? Your resistance to bending will worsen! It's the lever principle!!! make them vertical and add additional ribs!) as well as boards of modest thickness perforated with a diameter very close to their thickness. This weakness could cause the part being worked to detach and cause serious personal injury, but only if the device does not catch fire first: you are using a hand drill, designed for intermittent use in a ventilated environment, in a tiny closed environment and in continuous service .
The tailstock adjustment has excessive play, which can cause the workpiece to be unbalanced.... and the centrifugal force will take care of the rest... Do you have any idea that lathes almost always throw detached pieces into your face?
I hope no one emulates the construction of the tool as you conceived it: it's dangerous!
I'm sorry, but I came across your video by chance, and I can't allow the disclosure of dangerous objects just to earn a few bucks on the platform. People's health is more important. In Italy we have a brain-dead 10-year-old girl in a deep coma after attempting an infamous choking challenge seen on another platform (t*k-t*k). It's time we all take an active part in stopping and countering the dissemination of potentially harmful material.
goot goot.....
👍🙋♂️
Thank you very much
how to makeing cast
Bery good design, not perfect certanly. Good wood lathe design.
Thank you 😊
Interesting built. My only concerns are your fingers. Don't wear gloves on rotating machines!!! This is so dangerous. Once a tooth from Sawblade or a Drillbit catches a part of the Gloves, they will pull your fingers or hand inside of the Tools. But what I like is the Design and easy build.
Thank you for advice
창수 굿 로꾸로~~
diy wooden
Absolutely no reason to angle the tailstock.
Ещё б из туалетной бумаги слепил (с использованной).
بسیار بد.چون هیچ اندازه ای از قطعه ها نگفتی!!!!!!!😢😢😢😢