I'm running almost the same setup windowed piston a gomax pipe with a oko carb and a reed and it's way smother and fast.It vibrated like crazy with the stock exhaust
I had a disc up front, but got sick of changing pads every month so I went back to V Brakes. I get three finger stoppies and they last forever. SO Yeah, they DO work quite well.
Nice pipe & cylinder head 👍 But I never had any luck with the stock rag joints... I even bought grade 8 stainless 🔩 for it. The rubber was pretty soft & just keeps slipping. I might have been OK with 11G spokes & harder rubber spacers. I wouldn't trust rag joint with 52mm power.
I have used ragjoints for a decade. Never had any problems at all, including on my Minarelli hybrid with a race cylinder making substantially more power. But that said, I do have a lifetime experience keeping wheels true & tight which helps a LOT.
@@ManiacRacing Not sure if it was because I was using 29in wheels with 48 spokes 14g but if it was loose. Then it wasn't gripping enough & going tighter just squished the rubber into the spokes but still not enough grip. I had the sprocket even & 🔩 all torqued even in criss cross star pattern but still no luck. I'm happy now with the hub adapter, aluminum shim & 2 part epoxy glue.
Yeah 14g spokes are sketchy. I prefer 12g minimum, and 10g even better. Never had much luck with hub adapters. Still have several in my parts pile unused. @@michaelbrinks8089
He's got the same high performance racing head that I got except mine doesn't say Olyin on it mines a version one production unmarked it's a avenger 85/phantom menace 85 head bolts pattern matching for a yd100 a phantom and a ld100
Its quite the upgrade, even over my LD100's with timing correction. FAR stronger power, especially with the pipe which has a hard midrange hit. Started slipping the clutch, so I upgraded to a stronger mainspring shaft from Don Butler. I won't be running regular chinadolls anymore now that these Avenger 85's have dropped.
@@ManiacRacing Im pumped too, But I respect The Standard China-doll, ANyway I just mocked up my Polini 21mm on The Avenger, I wouldnt mide that Mz for the Avenger or i can build with what i already have,,,, Undecided, Take us for a ride sometime, Subbed 👽👍🏻
She sounds awesome brother ride safe
I'm running almost the same setup windowed piston a gomax pipe with a oko carb and a reed and it's way smother and fast.It vibrated like crazy with the stock exhaust
Yes Man i think it’s very good engine probably needs fine tuning but big potential need to see a real road test thanks for video Man 🤘🤘🤘
I subscribe your channel too 🤘🤘🤘🤞
Sounds great bro
That’s a big motor 😅
Ya gotta take it out on the interstate to really feel it.
Nice.
Sounds good. Thanks for sharing.
You know what are great for stopping a motorbike? Rim brakes
I had a disc up front, but got sick of changing pads every month so I went back to V Brakes. I get three finger stoppies and they last forever. SO Yeah, they DO work quite well.
🤘🏻
dont forget too take off the air filter. Mine goes up to 35 with ease now.
Never used a Air Filter No problems with velocity stack only
Nice pipe & cylinder head 👍
But I never had any luck with the stock rag joints... I even bought grade 8 stainless 🔩 for it. The rubber was pretty soft & just keeps slipping. I might have been OK with 11G spokes & harder rubber spacers.
I wouldn't trust rag joint with 52mm power.
I have used ragjoints for a decade. Never had any problems at all, including on my Minarelli hybrid with a race cylinder making substantially more power. But that said, I do have a lifetime experience keeping wheels true & tight which helps a LOT.
@@ManiacRacing Not sure if it was because I was using 29in wheels with 48 spokes 14g but if it was loose. Then it wasn't gripping enough & going tighter just squished the rubber into the spokes but still not enough grip. I had the sprocket even & 🔩 all torqued even in criss cross star pattern but still no luck.
I'm happy now with the hub adapter, aluminum shim & 2 part epoxy glue.
Yeah 14g spokes are sketchy. I prefer 12g minimum, and 10g even better. Never had much luck with hub adapters. Still have several in my parts pile unused. @@michaelbrinks8089
He's got the same high performance racing head that I got except mine doesn't say Olyin on it mines a version one production unmarked it's a avenger 85/phantom menace 85 head bolts pattern matching for a yd100 a phantom and a ld100
Yeah thats the earlier prototype I think. Not sure if anyone besides Olyin has them now.
✌👀👍
Let it Eat 👽👍🏻✨🌭
Its quite the upgrade, even over my LD100's with timing correction. FAR stronger power, especially with the pipe which has a hard midrange hit. Started slipping the clutch, so I upgraded to a stronger mainspring shaft from Don Butler. I won't be running regular chinadolls anymore now that these Avenger 85's have dropped.
@@ManiacRacing Im pumped too, But
I respect The Standard China-doll, ANyway I just mocked up my Polini 21mm on The Avenger, I wouldnt mide that Mz for the Avenger or i can build with what i already have,,,, Undecided, Take us for a ride sometime, Subbed 👽👍🏻
Currently working on getting a new battery for my gopro, so hopefully some ride vids soon!@@Op1zilla
I got a bike and im going to put a 49 cc on it
Be sure to get the engine mounted nice & solid and tight.
Cool camp. Are u "homeless"???
Yes. I posted this from the library and shot it on my obamaphone.
@@ManiacRacing awesome.. I'm also on an Obama phone . 😃😃😃
@@ManiacRacing actually just got another 1 3days ago
Is it homeless or home free? 😂
little lean
Cold actually.
What CDI is that?
The one that came with the kit.
ох советский дырчик