rc car upgrades and repair, never seen on YT scy16101, qc130, sg116
Вставка
- Опубліковано 16 вер 2024
- here i show the things i have made to my rc car so far. Hope you enjoy.
I apologise for some language errors, has english its not my native language and i am a bit rusty 😀
Here i leave you a comprehensive list of what i buy for my rc car, if its somethng you need and its not here, please leave me the request in the comment section, i reply ASAP, i appreciate the support.
Type the codes at check on aliexpress to get this exclusive discount for my viewers.
Code the text below and get exclusive discount!
$2 OFF For orders over $20
Code: 【IFP9FXS】
$5 OFF For orders over $50
Code: 【IFPHMRP】
$25 OFF For orders over $200
Code: 【IFPPQ3O】
$50 OFF For orders over $400
Code: 【IFP7VV5】
Codes expire at 30 september
Go register on the site AliExpress if you re not already and grab this amazing prices and discount codes: www.aliexpress...
sg116max rc truggy:(THIS RC IS A MUST HAVE)
Link to buy sg116max rc truggy:
s.click.aliexp...
Link for the hood pin retainers:
a.aliexpress.c...
battery velcro straps:
s.click.aliexp...
Steering link kit:
s.click.aliexp...
HEX screws for rc cars:
s.click.aliexp...
Shocks shown in the video:
s.click.aliexp...
shock oil i use in my shock tunning:(for sg116max go for 350-400 csp)
s.click.aliexp...
95mm tires i use the most in my sg116max:
s.click.aliexp...
heat sink and fan for 2847 size motor:
s.click.aliexp...
must have aluminium body post:
s.click.aliexp...
Wire adpater to divide the signal from ESC and connect various fans:
a.aliexpress.c...
Lights i use in all my rc cars:
s.click.aliexp...
Electric connector for rc lights:
s.click.aliexp...
Full Metal make over KIT i installed:
link for the aluminium kit:
s.click.aliexp...
4 in hex screwdriver:
s.click.aliexp...
Affiliate Links for the batteries i use:
www.ampow.com/... (fits the original battery tray)
www.ampow.com/...
www.ampow.com/...
www.ampow.com/...
www.ampow.com/...
www.ampow.com/...
If you want to support me more please use these affiliate links and like my videos, that is a HUGE help... thanks for watching and, DONT BE A STRANGER!
of you need anything please ask me in the comments.
thanks for watching
Please please make a clear tutorial about the steeing link fix, I have a brand new pro brushed version and the link is dislocated very easily on both sides. It is very annoying and I think this is an issue in this car. Thanks
Ok o will do that my friend, i will reply with the link when i have the video done, thanks for watching
@rickybeau thanks, I am subscribing and liking this video to keep watching your videos in the future. I appreciate your help .
hello, only today i found the time to do the video, there you go my friend, any question, you kniow where to find me :)
ua-cam.com/video/q9fo8ibaW-Y/v-deo.html
Thank u for ingenuity. I just bought one and they r great little cars. I will b following u for more tips & tricks. Australia 🇦🇺
Thanks aussie, you re very welcome i already have new upgrades to share soon my friend. Thanks for the feedback i much appreciate it.. its this small things that keep me going with the channel.
Thanks for the tip on those hood pins! Getting so tired of losing them haha!!
Happy to help! Thanks for the feedback
This is the most solid and strong cheap 1:16 car I've ever owned and most parts from Wltoys cars fits
Yes everything on this cars and parts you can use Wltoys and Rapid Beast SG116 Max and 3 different types of The Mjx Hyper Go 🙏 Amazing cars Soo nice to drive 😊
By the way, the shocks in the video are 80mm long, oem ones are 70mm, can use 70, 74 or 80, this ones i tried and work. I prefer the 80mm ones seems to keep the ride a bit higher and has more tension.
great video but the longer shocks in my case stop the steering from returning properly.Used 1/14 wltoys shocks but removed them after my experience.Also the driveshafts are in too much of an angle and seems to strain the suspension.Think shorter shocks for me is the way to go
@@kuganreddy6921 i dont have any issue like that.
In my case when the car is performing the ride height stays just a tad higher, but in the front a shorter one like 0.5cm shorter would works the best, i say 74mm-80mm rear, 74-70mm front, but its preference, works with all three at least in my case, i have metal steering links, not sure if that makes a diference.
Thanks for your comment, so wich one did you put in yours?
Thanks for watching.
@@kuganreddy6921 you can also shorten the shocks but puting like a clear tubing used in gardening, you open the shock and insert the tubing(the length of the tubing will determine the lenght of the sock shaft) in the shaft from the inside so it limits the travel of the shoxk , and test it till the height is at your liking, this way you can still use this shock you already have its very simple to do, did you got how its done?
I hope this helps if you have any doubt answer back i will explain it better or make a video about this.
I have the same car it's Amazing fast and New Oile shocks.Its soo much fun to drive thanks for nice video 😊
Thanks for the compliment my friend, see you soon.
i broke my shock in half and i ordered new shocks from ali express...i also run it with 3s 25c ,no problem so far
Hello my friend thanks for sharing your experience it might help some viewer who reads it, i appreciate that very much.
Hello is there for SG116 MAX a metal spare part nr 6018 for the steering? It broke and now lam trying to fix it with glue.
Great video an tips! Well done! 👍
Glad you liked my friend thanks for passing by.
Hello,
Really nice, well detailed and informative vid you posted,
Congrats and thank you.
I have bought myself the same exact care with most of the upgrade parts.
Only issue that I have is connecting the heat sink fan to some power.
The fan has 2 pin plug and the extension you provided is with 3.
Can you provide a small vid or picture of the part you ordered for the heat sink fan in order to connect it, an url for the part?
Thank you in advance!
Hello my fellow subscriber you simply connect the fan to one side of the plug leaving on hole free, dont worry it wont happen nothing if you connect it wrong.
Hope i was clear enough if you still have doubt dont hesitate to message me again.
Thanks for the support and dont be a stranger.
@@Fast_Lane_RCAppreciate for your fast reply, Yeah was a noob question from me, tried both ways but didn’t taught to invert the pins.
Works now, ty!
@@cristi-valentinnedelcu9937 you re welcome 👊
Is there a way to swap out the front, center, back drive shafts, spur gears, drive pinions, differentials for something maybe more universal and easier to replace?
Hello my fellow subscriber, there is nothing universal the pitch amd or mod has to be the same between gears, in sg116max its used mod 0.6 on spur and pinion the other gears should be the same.
Its not hard to find .6 mod gears for cheap you dont have to buy feom the rc car sellers, just have to buy the same mod and teeth count.
To change for other pinion you have to adjust the motor mount and this rc doesnt have a changeable motor mount, lots of rc dont.
Hipe i help you and answered your question.
Thanks for watching and dont be a stranger.
You've been a lot of help. Well, I'm having some horrible cogging issues on the scy 16101. I put new differentials, a new motor and the thing still cogs. Idk what the hell is up with this crap. I'm not sure if it could be the ESC? Fruatrating! Lmao 😅🤣 any idea what it could be? @@Fast_Lane_RC
@@Fast_Lane_RC hmmmm, I'm thinking it may be the ESC but you're input is appreciated. Will upgrade the ESC and get a new receiver and transmitter 🤘🏼
I have a question. For protection on certain spots like the top and down of the underside car. Is it good to use tin from cans? It is good to fold. And should l use glue or screws to fix it on the bottum?
Hello my felloew subscriber thanks for the question, the tin seems a good ideia, but you can also use some kind of thick plastic, and yes you have to put screws to hold it in place glue i suppose it ends to degrade fast.
Hope i could help, thanks for watching.
My car's tires are turning but they are not moving forward or backward.
@@mustafacirakk none of the wheels has power neather front nor rear?
I have a small question they Promote it with a Range of 300m. Does it reach this range?
Hello and thank for chiming in.
Where did you read that? They say 120m if i remember conrrectly, but its not that much maybe close to 100m, but i can say its enough because the rc is not that big.
I soon will do a mod to upgrage this range, stay tuned to my channel if thats something you're interested in.
Hope this helps, thanks for watching.
Ricardo
@@Fast_Lane_RCOk, thanks a lot for the reply.
@@Thyx_ you re welcome if you havy any doubt just put here in the comments i will try and help you.
hi, please, could yo send me the oil shock link?
Thanks
Hello Filipe and thanks for the support, there you go my friend:
s.click.aliexpress.com/e/_EwTBt03
If you need anything else feel free to ask.
Thanks for watching
@cadpires Filipe can i ask where are you from?
Brazil 🇧🇷
@@cadpires curioso tens o mesmo nome de familia que eu, tb sou Pires da parte do meu Pai, só por curiosidade, abraço amigo e obrigado pelo comentário. P.S: Eu Sou Português
Que grande coincidência!
Abraços fraternos aqui do Brasil 🇧🇷
Can you send links please 🥰🥹
I want to change my shocks Maybe later tyres to
Hello@@rahmankeskin4024 welcome to my channel there you have the link for the shocks:
a.aliexpress.com/_EyWMYrf
Anything else i can help you with?
Hello is there for SG116 MAX a metal spare part nr 6018 for the steering? It broke and now lam trying to fix it with glue.
@bennolindeboom8117 Helllo my friend, so your problem is on the steering, the solution is to buy metal links, but until it arrives i have a solution for you.
I have explain in it in a video already, but basically you use the link that is connected to the servo arm, you cut it in half, put a screw through one part and then you cut the screw head so you can thread o the other half. The steering link you glue it like you normally do cause in the servo it doesnt break cause it uses less force.
Do you understand the process?
Link for the metal links i use:
s.click.aliexpress.com/e/_EJSgxzD
The important part is when you install them try to make em the same size has the original put em side by side.
This os the video explaining it, at 6:30 aproximately i talk about that repair, go check it out, ua-cam.com/video/rWOAinO-zfo/v-deo.htmlsi=vNg7ZMTeXDAM9tbV
Thank you for your answer. You helped me alot
@@bennolindeboom8117 glad to know i helped thats the all point, peace my friend.