dunno if anyone gives a damn but if you are stoned like me atm you can watch pretty much all the latest movies and series on instaflixxer. Have been binge watching with my girlfriend for the last few days xD
it doesn't have dedicated SMG mag inserts, but my buddy runs P90 mags in the 5.56 inserts just fine. they are tight enough that you'd probably be ok unless you're like, regularly jumping off small drops and rolling around on the ground. I just picked this rig up, and my Tec9 mags fit nice and snug in the 5.56 inserts as well. I imagine pretty much any similar SMG mag would be fine as long as it's roughly as thick as an M4 mag stack, which im pretty sure just about every mag is. I don't think i've seen any MP5 or similar style mags that are any thinner. you could potentially fit two straight UMP45 style mags in a single 5.56 pouch, but it might be pushing it.
I see this video is 4 years old. Is this still great rig for range training? I've heard stitching is not great but I don't care because I'm just using for outdoor range training with some prone ground work. I was just curious if there's a better rig out there for same price.
@jrossnjax7 it is absolutely great for range training!! I've never had any issues with the stitching. If I had to buy it again I would! I've been out of the gear game for a while but I know there is a new version of this chest rig
Im stealing the floation device you have around your waste. I never thought about carrying a full on 40" tire intertube around the waistline but you never know when you might need to go marine and float across a lake in the middle of a firefight. Good idea.
I've recently ordered one of these but I forgot to check are the magazines secure in the pouches I'm just worried my magazines are going to fall out? Awesome review mate earned a sub from me!
@jamieball213 they shouldn't, but I took out the original mag holders and replaced it with the polymer mag inserts from Haley Strategic Partners (HSP) wrapped with double sided velcro. I think I have a video explaining this mod. The polymer mag insert mod is way. I feel like the original inserts are harder to reinsert mags. Thanks for the sub! Cheers!
Nice, mine will be here tomorrow. But i was thinking about ways i will be training with it and possible uses. everything up front is a beaut. Just wondered if the back has real estate possibilities
They are pretty much identical. Which means if you want run pistol mags, you'd have to buy the insert separately. Or you can buy the twinfalcons mk3 version that can be found here Teamairsoftdreams.com Just be aware that shipping will take a while(ask me how I know) if you just want to save money and shorter shipping time buy the emersongear mk3 version on Amazon. If you are going to buy pistol mag insert separately you can get the legit one from Spiritus (if they even have it in stock) for about $20. You can also get twinfalcons branded pistol mag insert from the website I mentioned before
@@carlosvasquez1646 yes about a $10 difference aliexpress=$69.95 ebay=$79.95 I checked the Ebay listings and the are sold and from the US. so you are better with Ebay or if you have amazon prime you can the emersongear version with shorter shipping time
Nice review. Just the right amount of detail.
thank you! cheers!
that's a really slick workbench setup my guy. I'm jealous.
Thanks! I got it from harbor freight
@@UncleBearTBO SWEET BENCH ! ODD WITH ALL THAT DOPE GEAR..YOU NEVER HAD A HILL PEOPLE KIT BAG !
Great review. Really helped me out with making my decision. Subscribed sir.
Thank you! Cheers!
dunno if anyone gives a damn but if you are stoned like me atm you can watch pretty much all the latest movies and series on instaflixxer. Have been binge watching with my girlfriend for the last few days xD
@Byron Ellis Yea, I've been watching on instaflixxer for months myself :)
does it have smg inserts?
no. you have to get that separately
it doesn't have dedicated SMG mag inserts, but my buddy runs P90 mags in the 5.56 inserts just fine. they are tight enough that you'd probably be ok unless you're like, regularly jumping off small drops and rolling around on the ground. I just picked this rig up, and my Tec9 mags fit nice and snug in the 5.56 inserts as well. I imagine pretty much any similar SMG mag would be fine as long as it's roughly as thick as an M4 mag stack, which im pretty sure just about every mag is. I don't think i've seen any MP5 or similar style mags that are any thinner. you could potentially fit two straight UMP45 style mags in a single 5.56 pouch, but it might be pushing it.
You can use the larger Shotgun shell looking loops to hold pistol mags. You just put the insert on the inside of the Chassis.
True but I got the pistol inserts anyway
I see this video is 4 years old. Is this still great rig for range training? I've heard stitching is not great but I don't care because I'm just using for outdoor range training with some prone ground work. I was just curious if there's a better rig out there for same price.
@jrossnjax7 it is absolutely great for range training!! I've never had any issues with the stitching. If I had to buy it again I would!
I've been out of the gear game for a while but I know there is a new version of this chest rig
Thx for replying @@UncleBearTBO
@@UncleBearTBO Do you know if Emerson is better than Krydex version?
Can the rig be adjusted to go a little lower?
I'm sure it can but it's supposed sit above tge abdomen. When I have time, I'll make a video on how to properly setup and adjust the rig
Im stealing the floation device you have around your waste. I never thought about carrying a full on 40" tire intertube around the waistline but you never know when you might need to go marine and float across a lake in the middle of a firefight. Good idea.
Can you get AK mags in that thing with the 556 inserts?
Just saw the part about the 762 inserts. Lol.
@@basedhardhands yea lol its a great chest rig very modular! cheers!
Can you fit esstac kydex mag inserts in this thing?
yes. someone made a product that makes the kydex inserts fit the chest rig
thinking about buying one of these soon thanks for the vid
I've recently ordered one of these but I forgot to check are the magazines secure in the pouches I'm just worried my magazines are going to fall out? Awesome review mate earned a sub from me!
@jamieball213 they shouldn't, but I took out the original mag holders and replaced it with the polymer mag inserts from Haley Strategic Partners (HSP) wrapped with double sided velcro. I think I have a video explaining this mod.
The polymer mag insert mod is way. I feel like the original inserts are harder to reinsert mags.
Thanks for the sub! Cheers!
@UncleBearTBO brilliant, I'll give the video a watch. Thank you!
@jamieball213 if you can't find the video lmk. Cheers!
How is the retention of the 5.56 mags, I seen other reviews that say its hard to take in and out. I wanted to know how your experience with it. Thanks
it's pretty solid. stays in place and wont come out unless you want it to. you just need to break it in for the couple of weeks.
@@UncleBearTBO Thanks man, keep up the good videos.
Can you connect an assault pack to that?
if you mean like a HSP Flat pack then yes
Nice, mine will be here tomorrow. But i was thinking about ways i will be training with it and possible uses. everything up front is a beaut. Just wondered if the back has real estate possibilities
Great video, not alot if info on emerson products. Nice work space! Keep up the great work.
Appreciate it! Thank you!
Great content I subscribed!
Awesome, thank you! more videos coming!
Thanks. I'll purchase. Your workstation table looks neat. Where can i get it
harbor freight. the bench vise was purchased separately
@@UncleBearTBO any specific name for table like that?
@@faridsoad2801 nope just a 48 In. Workbench With Light
www.harborfreight.com/48-in-workbench-with-light-60723.html
"smells real nice."
perfect lol. just the sort of details I need
lol
I’m looking to get the krydex mk3 they look very similar
They are pretty much identical. Which means if you want run pistol mags, you'd have to buy the insert separately. Or you can buy the twinfalcons mk3 version that can be found here
Teamairsoftdreams.com
Just be aware that shipping will take a while(ask me how I know) if you just want to save money and shorter shipping time buy the emersongear mk3 version on Amazon.
If you are going to buy pistol mag insert separately you can get the legit one from Spiritus (if they even have it in stock) for about $20. You can also get twinfalcons branded pistol mag insert from the website I mentioned before
Also krydex has an official store on aliexpress but again keep in mind shipping times will be long
UNCLE BEAR I was looking to order off eBay. Is there a price difference from aliexpress?
@@carlosvasquez1646 yes about a $10 difference
aliexpress=$69.95
ebay=$79.95
I checked the Ebay listings and the are sold and from the US. so you are better with Ebay or if you have amazon prime you can the emersongear version with shorter shipping time
UNCLE BEAR thanks for your help and your review
Great review. Thank you
Thank you! I have more videos coming stay tuned!!
UNCLE BEAR there’s a new tactical equipment company called Bigfoot. You should look into them
@@derrickclinton4436 I definitely will! thank you!
do you have a link for the company?
UNCLE BEAR I can’t find the link but they are on AliExpress. Just search BF GTPC 2.0 and their new plate Carrier will come up.
So you swapped out a HSP D3CRM for that?
no. every product that i reviewed i still own
The cheap knockoff buckles don't seem to work
You can modify the male buckle to make it work. I have a video explaining this mod. Cheers!
@@UncleBearTBO think I'll buy something that works but thanks good vid
@@remingtonsiefkas2458 thank you! cheers!
🤦