Please hit that like and sub if you haven't! Well, if you enjoy the videos and work that goes into them! Hope this is enjoyable, whether or not buying a grinder at this price is on your radar. I tried to ensure it was educational in areas I thought warranted a tangent. Thanks for the support!
I have the Kafatek MC4. I love it but it does take a long time to grind and it's impossible to clean the inside of the machine. Also, is it possible that Kafatek grinders are "over-engineered?" I wonder how the simpler Zerno Z1 compares to this Kafatek?
You are great Lance, you are not shy of who you are, you are a great coffee nerd, and we all here are, and that what makes your videos so special, thank you and never change.
First off, thank you, Lance, for your attention to detail coupled with being so fun to listen to. Your disposition to take the coffee seriously without taking yourself too seriously. Rare and very appreciated. I wonder how you'd compare the flat max 2 to the Versalab M4. These are the two grinders I am most seriously considering, and I can't find anywhere that has thoroughly tested the M4 (let alone how it compares to the flat max 2). I hear some folks say they love the M4 because of its pre-breaker conical burr and the way the grounds land in the portafilter permit not needing WDT but then see others doing WDT and RDT with it. Then I debate over the Hedone Honne and Versalab M4 due to the burr setting mechanism differences and the bean funnel mechanisms. I can't find anyone laying out these sorts of considerations. Might be a fun video to do?
As someone who has owned two Kafatek grinders and both SSW and SLM burrs this is a good overview of what Denis produces. I completly agree about the seasoning, personally I found the process complete only after about 70lb through. Good job Lance.
I had a Eureka single dose for nearly a year and I thought it was an amazing grinder since it usually gets good reviews and is made in Italy. THEN I got an all-black MAX2 and honestly there is no comparison at all. The MAX2 does everything better. not only that but I can taste the notes for the first time. I know it's expensive but after being an espresso drinker for years I came to the conclusion that having an expensive grinder with a regular/basic espresso machine is way better than owning an expensive espresso machine but having a basic grinder.
I bought one last year,, the preorder was about 5 - 6 months. and I got it in December 2023. A few small notes from the video, The Dial indicator isn't a sticker on the Max 2 like it was in the OG max. its a CNC metal ring. Also if changes are made after the preorder, Kafitech will add these to the new grinders as long as they arnt sipped yet. Over all ive been very happy with it, have the SLM burrs , and it switches from spro to filter brew very nice.
Mentioned in your community post,, but please never change Lance.. I highly value your opinion, playful off the cuff times, and if you come across as arrogant or otherwise, it's not detrimental to the experience of your channel... in my opinion. You being you is why I choose you over Hoffman and Morgan... not that I don't watch their channels, but mostly you.
I’m happy with my AllGround Sense after years of single dosing. Especially as a med/dark drinker, no fuss and get delicious latte’s every time. But when I get back in to single dosing I’m going straight for the Kafatek MonoCon for sure. Thanks for the video!
Great video as always. Love your content and how much your recommendations have helped me improve my espresso preparation. Hope you get to try a Lagom 01 with the blind 102 burrs. That grinder with the Weber Blind Shaker have me in a very sweet spot.
Nice video. I’ve got an Kafatek MC5 that I love - probably loses out a bit on quality vs Max for light roasts, but has a great, fast, no fuss, no mess workflow for anything medium/dark.
Maybe I'm a bit jaded, but a coffee grinder of that price category needing multiple bellows, having stuck beans or large chips and not being intended to be cleaned with risk of warranty issues is crazy. I think I paid a lot for my Niche Duo and perhaps I am not deep enough into coffee that I would notice the difference in coffee between these grinders, but it does not have these same issues at all.
Very thorough. I have max2 and I can relate. I love the fact you tested the calibration to the micron. Been waiting for this review forever but you did not disappoint.
I’ve had several Monoliths over the last 8 years. Currently running the Max1 with SSWs and love the espresso I’m making. It’s amazing to watch Denis improve them over the years
Nice video... I can see that finally prebreakers are the new trend... and rightly so. I use cheap grinder from automatic KRUPS machine with RPM adjustment as my prebreaker for Lagom P100 and it works perfectly. Please all flat burrs producers... start designing grinder with the prebreakers :D
Just for aesthetics,/workflow, or shot qualiy? I'm not aware of much evidence or consensus that chaff harms the shot - and would like to know if there is (i.e. I"m not criticizing, genuinely asking)
Hey Lance! Can you please shed some light on the import duties (and/or process) to Europe as you are a good example for the typical experience now. Thanks a lot!
Hello. I am not Lance, but I imported my MAX2 to Sweden. I payed like 645 USD of import fees and 180 USD for shipping. UPS sent me an email to pay the import fees and it took 7 days to receive my grinder.
Basically you pay the VAT % of your country + % of import fees, according to the categorization of the device you are willing to import. In Greece grinders fall in the category of 4-5% import fees, on total value (grinder value +shipping costs).
i like the high end grinder reviews a lot, even though i don't see myself getting one any time soon i like to see what's out there and what's going on in the top of the line
As mentioned near the start of the video in regards to what features may be included with the grinder on pre-order, I wonder what the cutoff date for new features/tech/design etc is as there is an update agreement that one agrees to when ordering a grinder that states it may receive minor to major improvements from what was pictured at the time of placing an order
I was interested in one of these because of the great build quality, but that double bellow business is insane for a grinder at this price point! That cone pre breaker is pretty sweet though.
Brilliant video. Quick question Lance if you don’t mind. Do you enjoy cleaning your equipment? Taking things apart and seeing how they operate? I do and I love taking my EG1 and LM Strada EP1 apart. Keeping it clean is part of the enjoyment of coffee.
Ever play with the Ceado 37Z HERO? Not really in love with mine. Very little in terms of reviews online. Maybe because it’s pricey. Wish I had waited for the EG-1 or this one.
Lance was getting some hate on the KafaTek forum before the video launched expecting it to be negative, but it was really fair. I have a Max SLM and reading all the comments i can see how it looks crazy to buy such an expensive grinder and need to play all these games... but then you taste the coffee and you understand...
Curious if you prefer these over the Weber EG1. I am looking to purchase something like this, but initially it will be only for filter coffee. Leaning towards EG1 with ULF burrs.
Hey Lance - that was great - and at last a reviewer has said - taste over workflow - why else would we be here. What you didn't include was - alternative for those of us who can't spend that ($5300 in Canada). Will the Lagom p64, the timemore sculptor, df78v or mazzer philos - (all great grinders at less than half the cost) produce somewhere near as good a coffee?? -he asks hopefully.
The one I really had an inkling towards was the Levercraft Ultra. Nowadays my endgame would be one of the newer Zerno grinders but since that's a long shot I'll stay pleased with my K Plus.
I’m considering the conical version to pair with my decent - I prefer comfort classic medium-dark espresso. Would love to see a review of the MC and how it compare to the flat max2
Just wondering if I might be about to bug you with a comparison question. How does the noise compare to the laughter of your child that reminds you of loved ones long passed? Is the grind more or less consistent than the waxing and waning of the moon? Does the espresso match the bittersweet tang of realising that at some point when you were a child your parent picked you up for the last time?
Very comprehensive, thank you, I made some comments in Kafatek forums. Beautiful Faema in the background! Do you have a video on that / plan to make one? I searched, didn't find...
Awesome video. Hope you'll a bit how much the auger on the Philos, negate the effect of slow-feeding. I love the results of slow-feeding, but hate the process.
I love to see the Option-O dosing cup everybody hates (because it is so cheap made) in so many videos 🤣 I have one too and use it every day 👍 Made my day 🙂
That isn't the option o dosing Cup lol. I despise the option o dosing Cup. The one in this video is the weber Workshops blind tumbler, the design option o was inspired by for their tumbler.
I have the v1 with SLM burrs and have not had it stall since the first 3 months of use where the burrs were still getting seasoned. Also cleaning is not that hard just unscrewing the top. I have never seen that double puff though 😂
Amazing video! Lance, can you recommend grind setting for your Ultimate pouriver recipe on Sculptor 078. I saw on your review the setting was 6, but isn't it too fine?
lance, love u but HELP ME :). Im 4k budget, mainly for filters, EG1 or monolithMax? I already have Timemore 070, DF64 SSPMP, NicheZero and a Decent XXL. I do not know what to do... ( Obrigado!!!! )
Thanks Lance, I have an lagom 01 on order but i am a bit worried about getting locked into just the 102MM mizen maybe it is worth going to kafatek, it is really tough at this level.
I believe the 98mm burr carrier will cost $300-400 for the Lagom 01, which is honestly not bad. So I wouldn't worry. Also, SSP are working on a 102mm burr!
Great video Lance and fellow coffee nerds. I'm lucky to have an EK43 with pre 2015 burrs. What's the issue with pre 2015 burrs thats briefly mentioned? Can anyone point me towards more info? Cheers.
Videos such as this remind me of the golfing gadgets, each of which will add 5 yds to your drive, or fuel gadgets that give you extra MPG. There is a law of diminishing returns, which for me is to use none of it, be it golf, gas, or coffee.
Lance, maybe you could go into more burr details/tasting and brewing optimization with the various Shuriken burrs on your Unfiltered channel? I now have two Max2 grinders one with LM and one with CR. My favorite filter burr previously was the original 98mm SSP Brewing but I believe I prefer the Shuriken CR over it for the most part. I just received the Max2 with CR and it seems notably cleaner than what I remember my Max1 CR being. I'm curious how you feel this impacts optimal extraction parameters, TDS targets, etc? Also, how do you prefer to approach LM burrs? I find that they over extract (to my preferences) with something like a Sworks High Flow but shine with slower flowing baskets? Your thoughts? I enjoyed watching the review very much even though I have been a lover of Kafatek for quite some time.
...also you are right about the seasoning. I have found that Shuriken burrs have the largest improvement in flavor with sufficient seasoning. It seems like closer to 20 pounds is needed in my experience.
Hey Lance! Thanks for the video. I just got a DF83v and I am loving it. One interesting point you made is regarding when going from large grind size to smaller grind size. Would that apply to DF83v as well? Thanks!
Hey Lance, been excited for this one to come out! Thank you. You said the SLM are similar to the Core in the 80mm size. Are there any in the 64mm size that are also seem similar for you?
Why does the version you purchase look like a prototype compared to the original? The textured lines give it a 3D print vibe, I prefer the matt over glossy, and that yellow sticker I assume can be removed?
Great video, I learned some interesting things. It's a beautiful piece of machinery, but I'm not sure I'd be spending my money on one as I'm quite staunchly against the extreme-closed-source policies. I mean, especially the big sticker about not disassembling it, leaves a bad taste in my mouth :/ I get not wanting to have to cover mistakes your customers make, but to me, a truly great tool should be built not only to be consumed but also to be maintained and improved. Otherwise, do I really even own the damn thing or am I just paying for the privilege of renting it from the company that makes it? Anyway, now I'm waxing philosophical. Thanks for your videos, Lance!
Please hit that like and sub if you haven't! Well, if you enjoy the videos and work that goes into them! Hope this is enjoyable, whether or not buying a grinder at this price is on your radar. I tried to ensure it was educational in areas I thought warranted a tangent. Thanks for the support!
Thoughts on the 01?
I have the Kafatek MC4. I love it but it does take a long time to grind and it's impossible to clean the inside of the machine. Also, is it possible that Kafatek grinders are "over-engineered?" I wonder how the simpler Zerno Z1 compares to this Kafatek?
Ceado Hero review anytime soon?
Pretty sure kafatek does not make their burrs, they just design them ;)
Stupid idea …Make for the 3 holes in the burrs 3 screws that are going with the shape of the burr !😊
After Hoffman's video on a grinder yesterday the price point whiplash in coffee is hittin hard.
Hope someone puts them head to head and does a blind taste test with home coffee drinkers who aren't experts.
Seriously from one extreme to the other
I love that lance releases this video the same week Daddy Hoff releases a video on a $33 grinder
Will I buy one? Never. Am I glad it exists? Absolutely.
You are great Lance, you are not shy of who you are, you are a great coffee nerd, and we all here are, and that what makes your videos so special, thank you and never change.
First off, thank you, Lance, for your attention to detail coupled with being so fun to listen to. Your disposition to take the coffee seriously without taking yourself too seriously. Rare and very appreciated. I wonder how you'd compare the flat max 2 to the Versalab M4. These are the two grinders I am most seriously considering, and I can't find anywhere that has thoroughly tested the M4 (let alone how it compares to the flat max 2). I hear some folks say they love the M4 because of its pre-breaker conical burr and the way the grounds land in the portafilter permit not needing WDT but then see others doing WDT and RDT with it. Then I debate over the Hedone Honne and Versalab M4 due to the burr setting mechanism differences and the bean funnel mechanisms. I can't find anyone laying out these sorts of considerations. Might be a fun video to do?
it's oddly comforting to know that this $3600 grinder has more of an annoying retention workflow than my offerup $200 Eureka silenzio lol
As someone who has owned two Kafatek grinders and both SSW and SLM burrs this is a good overview of what Denis produces. I completly agree about the seasoning, personally I found the process complete only after about 70lb through. Good job Lance.
Can’t wait for the hance ledrick cut
This is it
Spread out the love on that face.
I thought about this every time he said how much he loves grinding.
Yeah I’m hoping to see him brew something under extracted
@@EeeTeePwnHome or astringent!
Man, that mustache is bodacious.
This is the only comment I need.
🤣😂🤣
I had a Eureka single dose for nearly a year and I thought it was an amazing grinder since it usually gets good reviews and is made in Italy. THEN I got an all-black MAX2 and honestly there is no comparison at all. The MAX2 does everything better. not only that but I can taste the notes for the first time. I know it's expensive but after being an espresso drinker for years I came to the conclusion that having an expensive grinder with a regular/basic espresso machine is way better than owning an expensive espresso machine but having a basic grinder.
I bought one last year,, the preorder was about 5 - 6 months. and I got it in December 2023. A few small notes from the video, The Dial indicator isn't a sticker on the Max 2 like it was in the OG max. its a CNC metal ring. Also if changes are made after the preorder, Kafitech will add these to the new grinders as long as they arnt sipped yet.
Over all ive been very happy with it, have the SLM burrs , and it switches from spro to filter brew very nice.
You wasted your money and should be taxed at a far higher rate.
Please do the Monolith Conical MC6 next!
Would love to see how the MC6 compares to the Flat MAX series :)
Just an absolutely beautiful tool. I'll stay with my Fellow Ode Gen2. Thank you very much Lance.
Mentioned in your community post,, but please never change Lance.. I highly value your opinion, playful off the cuff times, and if you come across as arrogant or otherwise, it's not detrimental to the experience of your channel... in my opinion. You being you is why I choose you over Hoffman and Morgan... not that I don't watch their channels, but mostly you.
Me personally I come for the tech talk and opinions not singing, just saying. 🤔
@@warrenstanford7240 Aww, I like the singing.. it's at least very rare.
Same, but theres a forward button for that reason. Still this channel provides the most value imo when it comes to coffee info@warrenstanford7240
Agreed
Love the singing and humor
I’m happy with my AllGround Sense after years of single dosing. Especially as a med/dark drinker, no fuss and get delicious latte’s every time. But when I get back in to single dosing I’m going straight for the Kafatek MonoCon for sure.
Thanks for the video!
This was great! I am a Flat Max 2 owner for about a year and I have been super happy with it!.
Have had my Monolith for 6 months. It’s amazing!
Thank you Lance! I have the EG-1 and original Niche but I found this video to be very useful. I love the detail of your content.
I just wanted to say that my new Kafatek MAX2 literally arrived at my door the second this video went live.
Love life's little coincidences. That's cool!
Great video as always. Love your content and how much your recommendations have helped me improve my espresso preparation. Hope you get to try a Lagom 01 with the blind 102 burrs. That grinder with the Weber Blind Shaker have me in a very sweet spot.
Nice video. I’ve got an Kafatek MC5 that I love - probably loses out a bit on quality vs Max for light roasts, but has a great, fast, no fuss, no mess workflow for anything medium/dark.
Pre-breaker seems like such a good all around idea for pretty much every grinder - it has to make the job just that much easier on the actual burrs.
Maybe I'm a bit jaded, but a coffee grinder of that price category needing multiple bellows, having stuck beans or large chips and not being intended to be cleaned with risk of warranty issues is crazy.
I think I paid a lot for my Niche Duo and perhaps I am not deep enough into coffee that I would notice the difference in coffee between these grinders, but it does not have these same issues at all.
Very thorough. I have max2 and I can relate. I love the fact you tested the calibration to the micron. Been waiting for this review forever but you did not disappoint.
I’ve had several Monoliths over the last 8 years. Currently running the Max1 with SSWs and love the espresso I’m making. It’s amazing to watch Denis improve them over the years
Please make a comparison vs the Lagom 01 with the 102mm burrs :)
Nice video... I can see that finally prebreakers are the new trend... and rightly so. I use cheap grinder from automatic KRUPS machine with RPM adjustment as my prebreaker for Lagom P100 and it works perfectly. Please all flat burrs producers... start designing grinder with the prebreakers :D
Always enjoy the content. I hope you enjoy making it.
Thank you for your in depth videos!! Always learn something new.
Really nice detailed look at a great grinder! Thanks!
What we have been looking for! Pressing the like button even without watching.
The acceleration in rpm described is manual input right? There isn’t some function to program 6:24
15:39 Please find a way to add a vacuum to remove chaff between the pre-breaking and final cutting burrs, manufacturers of multi burr grinders.
There's a couple out there, the TREE FIELD Kirimai and the I'M NOT A BARISTA Momentem.
Neither one seems to have achieved much popularity though.
Just for aesthetics,/workflow, or shot qualiy? I'm not aware of much evidence or consensus that chaff harms the shot - and would like to know if there is (i.e. I"m not criticizing, genuinely asking)
Hey Lance! Can you please shed some light on the import duties (and/or process) to Europe as you are a good example for the typical experience now. Thanks a lot!
Hello. I am not Lance, but I imported my MAX2 to Sweden. I payed like 645 USD of import fees and 180 USD for shipping. UPS sent me an email to pay the import fees and it took 7 days to receive my grinder.
That depends exclusively on your own country's practices. In Portugal they tend to be cutthroat, in Ireland more lenient. Dunno about others.
Basically you pay the VAT % of your country + % of import fees, according to the categorization of the device you are willing to import. In Greece grinders fall in the category of 4-5% import fees, on total value (grinder value +shipping costs).
i like the high end grinder reviews a lot, even though i don't see myself getting one any time soon i like to see what's out there and what's going on in the top of the line
I'm rocking the Max V2 with a Flair 58. Wondering if I should upgrade to the Strietman C2? Hint, hint Lance?
Lance, I enjoy watching your videos. Do you have plans to review the Mahlkonig e65GBW grinder ?
Amagad so excited for this vid!
Anyone know what the little shelf that the weber shaker sits on is?
You’re spilling the beans!!
As mentioned near the start of the video in regards to what features may be included with the grinder on pre-order, I wonder what the cutoff date for new features/tech/design etc is as there is an update agreement that one agrees to when ordering a grinder that states it may receive minor to major improvements from what was pictured at the time of placing an order
Awesome video! Its fun to see these kind of grinders, even if I'll never own one
Could you please tell me where you got that add-on shelf that you're sitting the Weber shaker on?
I was interested in one of these because of the great build quality, but that double bellow business is insane for a grinder at this price point! That cone pre breaker is pretty sweet though.
Brilliant video. Quick question Lance if you don’t mind. Do you enjoy cleaning your equipment? Taking things apart and seeing how they operate? I do and I love taking my EG1 and LM Strada EP1 apart. Keeping it clean is part of the enjoyment of coffee.
Ever play with the Ceado 37Z HERO? Not really in love with mine. Very little in terms of reviews online. Maybe because it’s pricey. Wish I had waited for the EG-1 or this one.
And here I am extremely happy with my encore esp :D
@lancehedrick how are the 98mm LS burrs ?
Lance was getting some hate on the KafaTek forum before the video launched expecting it to be negative, but it was really fair. I have a Max SLM and reading all the comments i can see how it looks crazy to buy such an expensive grinder and need to play all these games... but then you taste the coffee and you understand...
Since you mentioned it how do you like pk100 burrs and maybe a few words on the grider?
I just bought one with MD burrs (Medium Dark)
Curious if you prefer these over the Weber EG1. I am looking to purchase something like this, but initially it will be only for filter coffee. Leaning towards EG1 with ULF burrs.
Why the "old" version looks matt and the new Max 2 glossy? The black matt finish look more uniform. Very nice
Very well done review. I also find the air puffer necessary with my MC6. I use the VSGO Air-move Air Blower
Hey Lance - that was great - and at last a reviewer has said - taste over workflow - why else would we be here. What you didn't include was - alternative for those of us who can't spend that ($5300 in Canada). Will the Lagom p64, the timemore sculptor, df78v or mazzer philos - (all great grinders at less than half the cost) produce somewhere near as good a coffee?? -he asks hopefully.
All that was left for you to do Lance was to throw those Shuriken burrs like the coffee ninja you are.
Is it better than Weber EG-1?
The one I really had an inkling towards was the Levercraft Ultra. Nowadays my endgame would be one of the newer Zerno grinders but since that's a long shot I'll stay pleased with my K Plus.
I’m considering the conical version to pair with my decent - I prefer comfort classic medium-dark espresso. Would love to see a review of the MC and how it compare to the flat max2
Just wondering if I might be about to bug you with a comparison question. How does the noise compare to the laughter of your child that reminds you of loved ones long passed? Is the grind more or less consistent than the waxing and waning of the moon? Does the espresso match the bittersweet tang of realising that at some point when you were a child your parent picked you up for the last time?
Why would I want a bittersweet tang? What does that even mean? Pls explain so I can't respond appropriately.
When you named 98hu, you were showing 98ulf on screen. Whats your view on 98ulf?
@crashandrise that's an editing mistake, then. Hugo doesn't know the burrs like i do ha! I dislike ulf.
Very comprehensive, thank you, I made some comments in Kafatek forums. Beautiful Faema in the background! Do you have a video on that / plan to make one? I searched, didn't find...
Awesome video.
Hope you'll a bit how much the auger on the Philos, negate the effect of slow-feeding.
I love the results of slow-feeding, but hate the process.
Lance, can you do some home roaster reviews and guides? I think it’d be a great series.
I love to see the Option-O dosing cup everybody hates (because it is so cheap made) in so many videos 🤣 I have one too and use it every day 👍 Made my day 🙂
That isn't the option o dosing Cup lol. I despise the option o dosing Cup. The one in this video is the weber Workshops blind tumbler, the design option o was inspired by for their tumbler.
@@LanceHedrick no, I don't mean the tumbler / blind shaker. I mean the small tin cup at 14:46 👍
for light - medium roast espresso, do you have a preference between eg1 core burrs vs. SLM burrs?
Hey lance, where would you spend my money for an espresso first setup? Eg1 or max 2?
I have the v1 with SLM burrs and have not had it stall since the first 3 months of use where the burrs were still getting seasoned.
Also cleaning is not that hard just unscrewing the top.
I have never seen that double puff though 😂
Nice!
Had my Monolith Max for about two months and I’m still working through all the variables but, it’s transformed my shots beyond all recognition.
Transformed in a good way?
@@davidtester863 into Optimus Prime, as it happens.
out of curiosity, what grinder did you have before? i'm also thinking of upgrading to the monolith max
@@nisgt A Niche Zero which was teamed with an Olympia Express Cremina, Denis tells me that’s what he has!
Beyond all recognition? It's not coffee anymore?
Nice! Looking forward to this one!
Another banger Lance. Will you be doing a review vid of the Aries soon?
How’s that acceptable to have such a poor workflow and high retention for that price?
The double bellow,magic 🙏🏼 love it Lance
Amazing video! Lance, can you recommend grind setting for your Ultimate pouriver recipe on Sculptor 078. I saw on your review the setting was 6, but isn't it too fine?
Dang my kidney not even worth $3600 😝 love the informative content always keep it up lance thanks 🙏
lance, love u but HELP ME :). Im 4k budget, mainly for filters, EG1 or monolithMax? I already have Timemore 070, DF64 SSPMP, NicheZero and a Decent XXL. I do not know what to do... ( Obrigado!!!! )
Don’t they also have a large conical? Will you be doing a review on that as well?
My gen 1 with LM burrs has never stalled.
And what is the current "out of the box" grinder for filter "ace brews"?
Thanks Lance, I have an lagom 01 on order but i am a bit worried about getting locked into just the 102MM mizen maybe it is worth going to kafatek, it is really tough at this level.
I believe the 98mm burr carrier will cost $300-400 for the Lagom 01, which is honestly not bad. So I wouldn't worry. Also, SSP are working on a 102mm burr!
@@vebjrnsteinvik1421200$ i think
1 of 12!!! Thanks for making the video! Loved it!
Great video Lance and fellow coffee nerds. I'm lucky to have an EK43 with pre 2015 burrs. What's the issue with pre 2015 burrs thats briefly mentioned? Can anyone point me towards more info? Cheers.
I can't wait for Hance Ledrick's video on this one. It's a freaking gem with all the huffing and puffing and double prodding.
What’s that nice white ceramic vessel you use to spritz your beans before dropping them into the grinder in all these videos?
What is the vacuum I see in the beginning
Videos such as this remind me of the golfing gadgets, each of which will add 5 yds to your drive, or fuel gadgets that give you extra MPG.
There is a law of diminishing returns, which for me is to use none of it, be it golf, gas, or coffee.
Have you tried the sweet lab burrs that SSP makes for the eg-1?
Yes
@@LanceHedrick How are they compared to ULF and Core? Different enough to be worth trying?
Lance, maybe you could go into more burr details/tasting and brewing optimization with the various Shuriken burrs on your Unfiltered channel? I now have two Max2 grinders one with LM and one with CR. My favorite filter burr previously was the original 98mm SSP Brewing but I believe I prefer the Shuriken CR over it for the most part. I just received the Max2 with CR and it seems notably cleaner than what I remember my Max1 CR being. I'm curious how you feel this impacts optimal extraction parameters, TDS targets, etc? Also, how do you prefer to approach LM burrs? I find that they over extract (to my preferences) with something like a Sworks High Flow but shine with slower flowing baskets? Your thoughts? I enjoyed watching the review very much even though I have been a lover of Kafatek for quite some time.
...also you are right about the seasoning. I have found that Shuriken burrs have the largest improvement in flavor with sufficient seasoning. It seems like closer to 20 pounds is needed in my experience.
Anyone know where I can find info about the p100 mod he talks about to reverse spin?
When is the Strietman CT2 review coming?!
Lance, were there shims in place when you took it apart? If so, can you simply reassemble suing the same shim and shim layout?
$3600, and it has to be shimmed? You’ve gotta be kidding
Hey Lance! Thanks for the video. I just got a DF83v and I am loving it. One interesting point you made is regarding when going from large grind size to smaller grind size. Would that apply to DF83v as well? Thanks!
Hey Lance, been excited for this one to come out! Thank you. You said the SLM are similar to the Core in the 80mm size. Are there any in the 64mm size that are also seem similar for you?
How's the taste vs the eg-1?
Why does the version you purchase look like a prototype compared to the original? The textured lines give it a 3D print vibe, I prefer the matt over glossy, and that yellow sticker I assume can be removed?
Lance i have $1500 to upgrade with on a new espresso machine, What would you buy? Thank you
Appears to be using a servo motor, like in robotics and direct drive wheels in sim racing etc.
Great video, I learned some interesting things. It's a beautiful piece of machinery, but I'm not sure I'd be spending my money on one as I'm quite staunchly against the extreme-closed-source policies. I mean, especially the big sticker about not disassembling it, leaves a bad taste in my mouth :/ I get not wanting to have to cover mistakes your customers make, but to me, a truly great tool should be built not only to be consumed but also to be maintained and improved. Otherwise, do I really even own the damn thing or am I just paying for the privilege of renting it from the company that makes it?
Anyway, now I'm waxing philosophical. Thanks for your videos, Lance!
That chrome machine in the background keeps drawing my eye. It feels compositionally unsettling.