Це відео не доступне.
Перепрошуємо.

ESP8266 Based Smart Energy Meter using Google Firebase

Поділитися
Вставка
  • Опубліковано 14 сер 2024
  • In this video, I will show you how I made my own DIY smart energy meter, allowing us to see the live reading of the energy meter from remote places.
    You will learn how to take readings from a conventional energy meter using ESP8266 (Node MCU) and measure voltage and current using ZMPT101b & ZHT103. Then we will use GOOGLE FIREBASE for uploading the data to a real-time database.
    Here you will get the codes and circuit diagram: github.com/cir...
    If you want the Android app contact me via my Facebook page.
    Facebook: / circuitician
    Instagram: / circuitician
    You can purchase the Items from here ------------------------
    Node MCU: amzn.to/3ylCMZS
    Voltage Sensor ZMPT101B: amzn.to/36aF8yB
    Current Sensor ZHT103: amzn.to/2Unpa1z
    Energy Meter: amzn.to/3htBncR
    Optocoupler 817: amzn.to/36fDFqA
    USB CABLE: amzn.to/2TwMHNo
    #smart_energy_meter
    #iot
    #BE_CREATIVE
    #INDIAN_TECH_CHANNEL
    #BASIC_ELECTRONICS

КОМЕНТАРІ • 74

  • @sabyasacheedasgupta7197
    @sabyasacheedasgupta7197 3 роки тому

    Darun darun hoyeche dada

  • @oisheedeb481
    @oisheedeb481 3 роки тому

    You are doing really very well and I must say your editing is really very good.keep it up dada

  • @priyanshughosh830
    @priyanshughosh830 3 роки тому +1

    This video is on someother level than your previous videos, it looks more professional and asthetic loved it 😀👍, keep up the good work dada

  • @anirbanojha1862
    @anirbanojha1862 3 роки тому

    Oshadharon 💥💥💥

  • @rajamanideep591
    @rajamanideep591 2 роки тому +1

    nice n great work , bhaai, good initiative which helps many technical students n enlightens many young minds , once again bahoot badhiyaan bhai

  • @suprativdey596
    @suprativdey596 3 роки тому +1

    Shera toh 🔥🔥

  • @RenishSiyodia
    @RenishSiyodia 3 роки тому

    puro professional lagche.. noice work bhaiya...!!

  • @suparnabasu9054
    @suparnabasu9054 3 роки тому +1

    Khub bhalo hoyeche babu

  • @shubhamghosal
    @shubhamghosal 3 роки тому +1

    Amaaazing outlook 💖💥

  • @kolboy2028
    @kolboy2028 3 роки тому +1

    Nice Project😘

    • @PsynideNeel
      @PsynideNeel 3 роки тому +2

      Sera hoeye...
      Tui r koto jaigai clutch korbi bol? 😅😅

  • @souptikdas9461
    @souptikdas9461 3 роки тому

    Well done bhai...... Keep educating the mass.....great job

  • @pho3nix732
    @pho3nix732 3 роки тому +1

    Waiting for more IoT projects dada ❤️

  • @sumantradutta8851
    @sumantradutta8851 3 роки тому

    Hi Circuitician, great work,

  • @alephnull333
    @alephnull333 3 роки тому

    Darun :))

  • @prantikdutta4800
    @prantikdutta4800 3 роки тому

    Darun dada...very nice ❤

  • @rohanmukherjee8405
    @rohanmukherjee8405 3 роки тому

    This is really interesting! Carry on.

  • @subhajitsaha2422
    @subhajitsaha2422 3 роки тому +1

    😍😍

  • @descifrador9666
    @descifrador9666 3 роки тому +1

    This is just Wow!

  • @neelaybera9921
    @neelaybera9921 3 роки тому

    superb

  • @somalisikdar4484
    @somalisikdar4484 3 роки тому +1

    Grt work ❤️❤️😊

  • @arpandutta1356
    @arpandutta1356 3 роки тому

    🔥🔥🔥🔥

  • @sumanmondal6709
    @sumanmondal6709 3 роки тому

    Darun...carry on 👍

  • @saikatkar7728
    @saikatkar7728 3 роки тому

    🔥

  • @maneeshakunta1832
    @maneeshakunta1832 2 роки тому

    Very nice project

  • @pujaroychowdhury8797
    @pujaroychowdhury8797 3 роки тому

    Great

  • @srijanchakraborty5821
    @srijanchakraborty5821 3 роки тому

    ❤️❤️

  • @rajgupta9992
    @rajgupta9992 11 місяців тому +1

    😮 great !

  • @amansingh3246
    @amansingh3246 2 роки тому +2

    Does it have really need to use analog energy meter as you already used volt and current sensors ?
    Thanks

    • @circuiTician
      @circuiTician  2 роки тому +3

      In case of AC to measure energy you need 4 items
      Energy = voltage × current × powerfactor × time
      So the process will be little bit difficult.
      If you use a energy meter instead the energy measurement will be more accurate

    • @amansingh3246
      @amansingh3246 2 роки тому

      @@circuiTician Got it, thanks for your reply. If we want to monitor only kWh then I need only energy meter, optocupler & Node MCU. No need of ads115, voltage and current sensors ?
      Thanks

    • @circuiTician
      @circuiTician  2 роки тому +1

      Yes you can do that for sure

    • @amansingh3246
      @amansingh3246 2 роки тому

      @@circuiTician would you please help me in getting the android app and other configuration. Thankyou

    • @circuiTician
      @circuiTician  2 роки тому +1

      Contact me via instagram

  • @bharathilakshmi8916
    @bharathilakshmi8916 2 роки тому

    Brother, please tell this! In one circuit diagram (5:27 )depicting the ADS1115, ZHT103 & ZMPT101B connections u shown a diagram with A.C supply to current sensor, where as in the GIT HUB schematic diagram , (1&2) terminals have that C.S has no a.c supply , why?

    • @circuiTician
      @circuiTician  2 роки тому

      Basically there is no terminal in the CT sensor.... You have to loop the wire from the middle of the CT sensor (zht 103)

  • @bablumridula6672
    @bablumridula6672 Рік тому

    Vari nice

  • @suchismitabasuroy3964
    @suchismitabasuroy3964 3 роки тому

    Great ❤️

  • @suchismitabasuroy3964
    @suchismitabasuroy3964 3 роки тому

    Wow ❤️❤️❤️❤️

  • @amankwaawilliam1723
    @amankwaawilliam1723 2 роки тому

    Hello, sir, I used a cloud meter and the consumotis very high so I want to ask if you have any solution for it

  • @rajamanideep591
    @rajamanideep591 2 роки тому

    What is pullup and cool down arrangement?

    • @circuiTician
      @circuiTician  2 роки тому

      you can see my video on arduino for pull up and pulldown arrangement

  • @THARUNKSECE-B
    @THARUNKSECE-B 6 місяців тому

    Sir where is kodular video link ? And how to get bill sir

    • @circuiTician
      @circuiTician  6 місяців тому

      This is a project not an product so you can't get bill. It will show only in app.
      And the app is not open source

  • @bablumridula6672
    @bablumridula6672 2 роки тому

    Varigood

  • @bharathilakshmi8916
    @bharathilakshmi8916 2 роки тому

    Also at first u shown the , CURRENT SENSOR, at the while plotting them on the board, i see there is no circuit board , except coil ? Why ,

    • @circuiTician
      @circuiTician  2 роки тому

      There was a problem with the circuit so I placed the coil only....
      You an check the circuit diagram for reference

  • @jisooooyaaaaaaaaa
    @jisooooyaaaaaaaaa 9 місяців тому +1

    sir is it posible to connect the blynk iot app to firebase?

  • @harisali1166
    @harisali1166 Рік тому +1

    Bro how can we make prepaid energy meter iot based

  • @umerazam8311
    @umerazam8311 Рік тому

    Hy Sir! how to get the same readings of Voltage, current and poer on our mobile app invertor using google firebase rather then buying the meter from market( which is too costly). kindly make a video or please guide in a reply. Thanks

    • @circuiTician
      @circuiTician  Рік тому

      For sensing anything you need a sensor. So for measuring voltage current and power you will need some sensors.
      And it is the cheapest way of measuring all these.
      If you are from India then the meter will cost 200 rs.

    • @umerazam8311
      @umerazam8311 Рік тому

      @@circuiTician Hy sir! i have bought ZMPT101 voltage sensor, hall effect current sensor and all i want to interface these sensor with esp-32 mcu and get the values of power, voltage and current used by each home automated device on the mobile app via google firebase. I hope you would explain this whole in detail. Will be very thankful to you

    • @circuiTician
      @circuiTician  Рік тому

      There are different videos on each topic on my channel... So you have to watch them all and merge the codes and circuit according to your need.

  • @nandakrishna4203
    @nandakrishna4203 2 роки тому

    You used single phase A.C supply, right(phase n neutral) ? But u said 230V D.C ?

    • @circuiTician
      @circuiTician  2 роки тому

      No it's 230 volt AC ... May be I mistakenly said D.C

    • @nandakrishna4203
      @nandakrishna4203 2 роки тому

      @@circuiTician until how much voltage this zmpt can withstand, bro

    • @circuiTician
      @circuiTician  2 роки тому

      I would not recommend to use more than 250 volt... And it is always good to check the data sheet

  • @nandakrishna4203
    @nandakrishna4203 2 роки тому

    How u given power supply to those elctronics in pcb ? Underneath? Do this ZHT 103 works or calculates based on hall effect? Also WHY U GIVEN DIRECT A.C SUPPLY TO THOSE ELECTRONICS INSTEAD D.C ? SOFTWARE USED FOR CODE EXECUTION N COMPILING , DUMPING ? BRO

    • @circuiTician
      @circuiTician  2 роки тому +1

      Watch the full video again carefully.
      ZHT is a CT sensor
      I am powering the pcb using a usb cable through Node MCU.
      Coding ide and other things all is shown into the video

  • @rajamanideep591
    @rajamanideep591 2 роки тому

    Dada, would u please respond on any social media interface, please , i am doing a project on this

  • @maneeshakunta1832
    @maneeshakunta1832 2 роки тому

    How much cost this total project prize

    • @circuiTician
      @circuiTician  2 роки тому +1

      If you want to make by your own then you can check the description for components.
      Or if you want to buy the whole set up then DM me in instagram or facebook

  • @rajamanideep591
    @rajamanideep591 2 роки тому

    Please