I want to see this behemoth grease the bottom king pins and drive shaft. I bet you my paycheck he won't fit under a Volvo without any help. not even if he greases himself up
I am astonished at how much grease you got everywhere. You don't need to purge the grease for 5 seconds. I hate getting services after sloppy techs like this. Way to much in the hood latch too, have fun smearing that all over your chest.
+Awesomeman1987 God forbid a mechanic working on a heavy truck should get a little bit of grease on their coveralls. Go work at the parts sales counter if you don't like getting dirty. Or be an engineer instead of a mechanic.
+Daves NoottHeereMaan it's not that I don't like grease (which I do, and if you say you like grease, you haven't dealt with it or you are lying), it's that I get irritated with people doing dumb, unnecessary shit that makes the life of other mechanics more difficult, not to mention it looks particularly unprofessional in my trade. I'm going to assume you are a truck driver...
+Awesomeman1987 First of all, I saw the vid too and I think it's hilarious that you think that was overgreasing. Secondly, consider the fact that it was perhaps done for illustrative purposes. I'm a truck mechanic and I do alot of grease jobs, and although it doesn't show him doing so in the vid I always make sure to wipe or clean away excess grease with a rag or brakleen or both - even so, it seems like there's still always someone who will bitch and complain about something they think wasn't done right. Reminds me of one mechanic in particular I worked with who complained nonstop about everything; about guys are using too much or not enough of something; about a job taking someone too long or they did it too quick and sloppy; or someone who's in the way because they're using "your" workspace or else they screwed off somewhere and have been gone for too long. Lastly, I'd like to point out that if you're working at any decent shop, it's not as if you're the one who has to pay the laundromat bill for your coveralls to get washed or for the hand cleaner/soap&water the shop uses.
+DavesNotHereMan ok, you're right, I'm bitching about a tiny thing. this is true. and it is also true that we were told in school to grease until fresh grease is purged. I just simply don't agree with that and I don't believe the life of the component is significantly extended by doing this.
Red Lithium Grease #2 - 120 LB. Drum (Sale PRICE: $199.00) Here you go ➞ ➞ www.walmart.com/ip/Red-Multipurpose-Lithium-Grease-2-120-LB-16-Gallon-Keg/837899538
Dude sure wasted a LOT of grease. That's a lot of this country's problem! Workers don't give a SHIT and are waster's! Somebody needs to teach that guy how to lube the plate!
Where can I see the entire video.
Can you please do this on more depth and long video
you should have it at normal speed upon that first point of application on each spot
You should only give the port 3 -5 shots of grease. Pumping until it bursts the seals only…bursts the seals. Other than that, good video.
I want to see this behemoth grease the bottom king pins and drive shaft. I bet you my paycheck he won't fit under a Volvo without any help. not even if he greases himself up
believe it or not. if you drop the air ride. the diffs rise 9 inches. so even the big guys can fit under the truck if they want to
Where can I get one of those grease guns? And what kind of Greece is needed for the suspension?
Got mine at Autozone
How often should you Greece a semi truck
Depends on the service the truck is preforming/ On highway over the road grease every 5000 miles, Off highway in the dirt weekly!
I am astonished at how much grease you got everywhere. You don't need to purge the grease for 5 seconds. I hate getting services after sloppy techs like this. Way to much in the hood latch too, have fun smearing that all over your chest.
+Awesomeman1987 God forbid a mechanic working on a heavy truck should get a little bit of grease on their coveralls. Go work at the parts sales counter if you don't like getting dirty. Or be an engineer instead of a mechanic.
+Daves NoottHeereMaan it's not that I don't like grease (which I do, and if you say you like grease, you haven't dealt with it or you are lying), it's that I get irritated with people doing dumb, unnecessary shit that makes the life of other mechanics more difficult, not to mention it looks particularly unprofessional in my trade.
I'm going to assume you are a truck driver...
+Awesomeman1987 First of all, I saw the vid too and I think it's hilarious that you think that was overgreasing. Secondly, consider the fact that it was perhaps done for illustrative purposes. I'm a truck mechanic and I do alot of grease jobs, and although it doesn't show him doing so in the vid I always make sure to wipe or clean away excess grease with a rag or brakleen or both - even so, it seems like there's still always someone who will bitch and complain about something they think wasn't done right. Reminds me of one mechanic in particular I worked with who complained nonstop about everything; about guys are using too much or not enough of something; about a job taking someone too long or they did it too quick and sloppy; or someone who's in the way because they're using "your" workspace or else they screwed off somewhere and have been gone for too long. Lastly, I'd like to point out that if you're working at any decent shop, it's not as if you're the one who has to pay the laundromat bill for your coveralls to get washed or for the hand cleaner/soap&water the shop uses.
+DavesNotHereMan ok, you're right, I'm bitching about a tiny thing. this is true. and it is also true that we were told in school to grease until fresh grease is purged. I just simply don't agree with that and I don't believe the life of the component is significantly extended by doing this.
Red Lithium Grease #2 - 120 LB. Drum (Sale PRICE: $199.00)
Here you go ➞ ➞ www.walmart.com/ip/Red-Multipurpose-Lithium-Grease-2-120-LB-16-Gallon-Keg/837899538
forgot to grease the drive train components
It's too fast
Slow the video down
Dude sure wasted a LOT of grease. That's a lot of this country's problem! Workers don't give a SHIT and are waster's! Somebody needs to teach that guy how to lube the plate!
Gg