Great video. I just had someone ram into the front of my Jeep in the parking lot while I was working so I gotta replace my whole bumper. Glad to know it’s an easy fix and doesn’t take that long. Wish I could do it myself but I wouldn’t even tempt it. Hoping it doesn’t cost too much to get done.
Hello and sorry to hear that. Typical labor cost is 40-90 an hour depending on t he shop. Your time is valuable and this will probably be billed at 1-2 hours. Thank you for watching!
Hello and we're not 100% sure. The model range for the grille stops at 2016. I would double-check the Jeep forums to verify but the fenders and hood range from 2011 to 2021. That is a good sign that you might be able to.
Hello Rosy and thank you for watching! You can purchase the bumper from our website here; bit.ly/Jeep_Cherokee_bumper . Please check us out on Instagram, FB, or TikTok as well. If you have any questions, you can chat on our website with our reps. Take care!
Hello. There will always be at least 1 bolt/screw that secures the bumper to the fender, and you can always find it on the corner of the bumper that meets the fender. Make sure that is removed, there might be a couple more screws that hold the fender liner to the bumper, remove those. The bumper itself is clipped into a bracket, so as long as those screws/bolts are removed, you should be able to pull the bumper off. That is all there is to it, once it's off the corners it will remove easily. Please let us know if you have more questions!
This one didn’t have it but there is a clip that connects the harness together. Press down on the tab near the bottom of the clip. That will disconnect the harness from each other
Thank you for watching our video! For purchase below...
Where to buy: bit.ly/Jeep_Cherokee_bumper
Visit us at: www.revemoto.com
Great video. I just had someone ram into the front of my Jeep in the parking lot while I was working so I gotta replace my whole bumper. Glad to know it’s an easy fix and doesn’t take that long. Wish I could do it myself but I wouldn’t even tempt it. Hoping it doesn’t cost too much to get done.
Hello and sorry to hear that. Typical labor cost is 40-90 an hour depending on t he shop. Your time is valuable and this will probably be billed at 1-2 hours. Thank you for watching!
Thank you, Thank you!
The other videos skip the pulling the corners by the 10 mm screw hole. Helps alot.
That's great to hear. Glad it helped! How long did the job take you?
Great video
Helped us out a lot.
Good video for a drinking game too.
Sip every time he says “also”
Glad you enjoyed it, and we think we'd get lit pretty quick. 😂
Very clear to me thank you Bro
We need a video where you disassemble the bumper cover from the grill.
Simple! Thanks!
You are very welcome Ron! Thank you for watching! If you need parts for your car in the future please visit www.ReveMoto.com
❤good job ❤Merry Christmas 🎉
Appreciate it. Have a Happy New Year!
Thaaaaank you for the video
You are very welcome! Glad video helped. If you need parts for your Jeep go to www.ReveMoto.com
Excellent video
Thank you very much!
Show how to change headlights for a 2018 Cherokee
Great video.. Thank you.. Love the Monopoly Plaques :)
We're glad we could be of help! Please sub, it helps us out a lot. 🤘
Thank you!
You're welcome! Please subscribe, it helps us a ton! ✌
Where would I be able to buy the rivets once I cut them off?
The best place is from Jeep. They should be a few dollars each but you can also buy them from Autozone/O'Rielly or online.
You can take a screwdriver in the center and push really hard then you can pull it out it’s a clip not a rivet
Hi there, can I replace my14 overland front lower grille with 2017? My14 has the front radar.
Thank you.
Hello and we're not 100% sure. The model range for the grille stops at 2016. I would double-check the Jeep forums to verify but the fenders and hood range from 2011 to 2021. That is a good sign that you might be able to.
@@ReveMoto Thank you.
Donde se puede comprar la pompa completo....
Where can I buy a front bumper
Hello Rosy and thank you for watching! You can purchase the bumper from our website here; bit.ly/Jeep_Cherokee_bumper . Please check us out on Instagram, FB, or TikTok as well. If you have any questions, you can chat on our website with our reps. Take care!
Esos seguros que cortaste cómo son o con qué seguros los remplazaste ?
Sorry google translated something about insurance, but if you are referring to anything that was damaged. Yes we did replace them.
I have a 2017 Jeep Grand Cherokee summit and the bumper will not pull off the wheel well. Can anyone help me
Hello. There will always be at least 1 bolt/screw that secures the bumper to the fender, and you can always find it on the corner of the bumper that meets the fender. Make sure that is removed, there might be a couple more screws that hold the fender liner to the bumper, remove those. The bumper itself is clipped into a bracket, so as long as those screws/bolts are removed, you should be able to pull the bumper off. That is all there is to it, once it's off the corners it will remove easily. Please let us know if you have more questions!
Thank you
How to remove parking sensors?
This one didn’t have it but there is a clip that connects the harness together. Press down on the tab near the bottom of the clip. That will disconnect the harness from each other
Jeep Cherokee latitude lux 2021
Yeah we can get that for you. Go to www.Revemoto.com
@@ReveMotothanks, please can you help to get for front bumper cover for Jeep Cherokee latitude 2021 3200
@@ReveMotothanks, please can you help to get for front bumper cover for Jeep Cherokee latitude 2021 3200
Front bumper cover