Shaper Origin Workstation Horizontal/Vertical Design with Free Plans
Вставка
- Опубліковано 29 гру 2020
- I designed a workstation for the Shaper Origin that converts from a Vertical Workstation to a Horizontal Workstation. You can get free plans for it here on my website: jack-bench.com/ I incorporated quite a few features into my design and I will describe those to you in this video. I have an accompanying article on my website where I describe the actual plans in more detail: tinyurl.com/Workstation-Article I also have a second article (and UA-cam Video) that has some tips on how you can build one for yourself. tinyurl.com/How-to-Build-Article I strongly encourage you to read the articles on my blog if you plan to build one for yourself. These free plans will also be available through the Shaper Hub.
Yeah! You are a champ for posting it for everyone, especially with plan and instructions... it will save everyone the massive trial and error time to duplicate the wheel... hard to beat! Thank you sir, subscribed and liked! ...read on...
Genius! This will be my first project when I get my machine.
That looks better than the official workstation.
really well thought out and built … great attention to detail you seem to have thought about extending the Shapers capabilities within a small space, kudos … I’m downloading the plans and will get to building this later in the spring, still have much to do to turn the garage into a workable shop, thank you!
I want to make something like this but have the festool vac clamp system in place to clamp down the work. Great job as always!
Great job! You overcame some of the limitations!
Brilliant
This looks great! I ordered my shaper yesterday and I look forward to building something similar! What type of plywood do your recommend for something like this?
Going to buy a shaper just so I can build this work station
This looks great and you’re providing a free is a blessing. Do you have any thoughts about modifying your plans to use micro jigs dovetail slots and clamps instead of T track and clamps?
I think shape origin stole your design, if you build this before shaper origin workstation . You really need to contact them . There is lot of similarities with their workstation! I could be wrong