Magic Chef Maintenance for Washer

Поділитися
Вставка
  • Опубліковано 31 січ 2025

КОМЕНТАРІ • 48

  • @constane7785
    @constane7785 2 роки тому +6

    Hello. Thank you so much for the editorial I was having a problem with my Magic Chef draining and I would freak out and wonder what was going on and I would move the the the drainage up and down till it drained but luckily I found you solve the problem was and I had a quarter and a penny in the drainage also a little bit of drain a little bit of lint and I've had it two years so as I said again thank you thank you thank you so much😊👌

    • @MagicChefUSA
      @MagicChefUSA  2 роки тому

      Happy to hear the video was of great help. :) If you ever have any questions, call our customer support line, 888-775-0202.

  • @TeeCee31
    @TeeCee31 5 місяців тому

    Omg your soo amazing I was having problems with draining and spinning and this video helped out a lot. I was so stressed that I would have to get another washer. I have had this washer for 3 years and I love it. There was 2 pennies and a hair pin with some lint. I never knew about this but it's now drained. Thank you soo much. I love youtube University. 😊

  • @brendamarie558
    @brendamarie558 Рік тому +5

    The rubber ring on the drain filter on the back bottom has cracked and water leaks on the floor. Can that be replaced? I'm on the 3rd floor. I do not want issues with my neighbors downstairs.

    • @MagicChefUSA
      @MagicChefUSA  Рік тому +1

      Please contact our office at 888-775-0202.
      Thank you

    • @Pressity1
      @Pressity1 Рік тому +5

      Mine is intact, but is leaking for me as well, and I see other comments on here that are saying the exact same thing! I’ve been googling for months, every possible wording to try to find the replacement for the gasket were all having leaking on our floors, but I haven’t been able to find ANYTHING! For this being such a common problem, this part needs to be easily found and ordered online FOR CHEAP TOO!

  • @ritarosado4673
    @ritarosado4673 Рік тому +1

    Where can i get the top rubber that goes to the filter. It's old and its leaking water from the bottom.

  • @lverduzco7923
    @lverduzco7923 Рік тому +1

    do you have a video showing h9w to tighten ths drum on the portable washer?

  • @garciast3
    @garciast3 2 роки тому +2

    My lid is on but E2 error comes and sometimes it’ll start and complete a wash but then it’ll start and stop ; how do I repair this ?
    Magic chef 0.9 Cu. Ft. Portable Washer

    • @constane7785
      @constane7785 2 роки тому +1

      Hello. I think I can help you. Sometimes mines do that and it could be the Lent so you pull the washer out and check that. If not then mines do that when it's uneven so try to put it on a flat more flat surface cuz you may think it's even but it's probably uneven somewhere

  • @mitchellman77
    @mitchellman77 Рік тому +2

    0:32 The audio for this video has disappeared with the marking of the split between the first two segments

    • @MagicChefUSA
      @MagicChefUSA  Рік тому

      Thank you for the comment, not sure why that is happening. Just reviewed the video at the time stamp you mentioned and seems the audio is fine.

  • @TakiyahRobinson-h4i
    @TakiyahRobinson-h4i 7 днів тому

    Hello my washer is working but it’s not filling with water. I can hear the machine trying to fill but no water coming out. I checked the water supply and unscrewed it and don’t see any build up. Any advice ?

    • @MagicChefUSA
      @MagicChefUSA  7 днів тому

      There may be an issue with an inlet valve. What is the model and age of your washer?

    • @TakiyahRobinson-h4i
      @TakiyahRobinson-h4i День тому +1

      @@MagicChefUSA Thank you so much for that! i found out later that night after my water hose exploded that the pipes were just frozen hahaha but i will keep that in mind for the future thanks so much!

  • @maggiemorel4994
    @maggiemorel4994 Рік тому

    When i lifted up my lid today it made a weird noise a plastic part flew out onto the floor. Would having the portable washing on a dolly with part of the front on both sides hanging off the dolly cause this? It really shakes so much sometimes tht the washing machine .moves away from orgional postion. I bought the portable dolly so i could move it to the sink easly. Could the machine shaking so much cause the part that open the lid break off ..i noticed their was a much bigger gap on the right side.

  • @angelicagoldhaber624
    @angelicagoldhaber624 4 місяці тому

    Hi I have this portable washer but it’s not turning on anymore any suggestions? It was working fine yesterday but today won’t turn on

  • @Celeste-x9p
    @Celeste-x9p Рік тому +1

    I am need a new filter/plug - not sure where or how to order it for washer/dryer combo magic chef mcscwd27w5 --- can someone assist

  • @makmelaf
    @makmelaf 2 роки тому +1

    What good are front leveling feet if it's out of level at the rear?

    • @grant.bloomquist
      @grant.bloomquist Рік тому

      Chunk of cardboard worked for me ;)

    • @Pressity1
      @Pressity1 Рік тому

      Right?! My floor is sloping back and I have to tip the washer even FURTHER in order to have it stable because only the front feet adjust!

  • @qkcam45
    @qkcam45 2 роки тому +1

    How do I level it from front to back since the lid is it not a flat surface?

    • @MagicChefUSA
      @MagicChefUSA  2 роки тому +1

      Hello. There are special levelers that will allow you to level the unit by attaching the leveler to the front panel and also the back panel. I recommend using a leveler that has a built in magnet to make it easier.

    • @qkcam45
      @qkcam45 2 роки тому +1

      Thanks for quick reply! Do those levelers work also to level front to back? What is the name of this type of leveler? Thanks again!!

    • @MagicChefUSA
      @MagicChefUSA  2 роки тому +1

      @@qkcam45 there is no specific name to it. Just called a leveler but it will state if it has a built in magnet and will have more than 1 way to check leveling. You can purchase it at your local hardware store.

  • @absolutelyballer
    @absolutelyballer 5 місяців тому

    What direction does the screw come out of the wash basket?

  • @khatybrabraxton7606
    @khatybrabraxton7606 Рік тому +1

    My machine is really loud on the spin cycle even after leveling. I have the 2.0 portable washer.

    • @MagicChefUSA
      @MagicChefUSA  Рік тому +1

      based off that, sounds like something may be wrong with the clutch assembly. I highly advise getting a tech to look at the unit to confirm.

  • @ChanelAlexus
    @ChanelAlexus Рік тому

    For the inside wash basin, mines stuck after unscrewing it. Is there an easy way to pull it out? We’ve tried everything to get it to lift out

    • @MagicChefUSA
      @MagicChefUSA  Рік тому

      After removing the nut, if the wash plate will not move try to gently flex it up and down from the outer edge. You can also gently tap on the center shaft with a small hammer and wooden dowel, careful to not damage the threads on the shaft.

  • @franciscorojo7846
    @franciscorojo7846 Рік тому

    My machine doesn’t drain. What can I do to fix this problem?

  • @AmandeepSingh-sp2dg
    @AmandeepSingh-sp2dg Рік тому

    Hi my machine doesn’t drain I clean the all filters but not able no open the inside tub spiner after open the one screw

    • @MagicChefUSA
      @MagicChefUSA  Рік тому

      Thank you. Can you hear the drain pump running?

  • @beckynhabayeh
    @beckynhabayeh Рік тому

    How can we buy a new lint filter? I couldn't find it on Amazon

    • @MagicChefUSA
      @MagicChefUSA  Рік тому

      Head over to our website mcappliance.com and select parts order. You can put in your model # and the list of parts will appear for your specific model

  • @brendamarie558
    @brendamarie558 5 місяців тому

    I broke my washer HLXN-008A07 Filter Plug, and need to replace it.

  • @Jasper-n1g
    @Jasper-n1g 2 місяці тому

    Washer won't spin when on.i can hear it engage but no spin

    • @MagicChefUSA
      @MagicChefUSA  2 місяці тому

      Does the washer still agitate? If so, possibly an issue with the clutch assembly.
      Thank you

  • @johnnykagladden7970
    @johnnykagladden7970 8 місяців тому

    Hello, would you happen to know how I can remove a bra wire from the magic chef?

  • @missdbae
    @missdbae 7 місяців тому

    Mine won’t agitate when clothes are in it

    • @MagicChefUSA
      @MagicChefUSA  7 місяців тому

      Please contact our office at 888-775-0202. Thank you

  • @0807ariana
    @0807ariana 2 роки тому

    What f8 error code means

  • @user-oi9en3er7g
    @user-oi9en3er7g Рік тому

    Can’t hear you

  • @martintrj5620
    @martintrj5620 Рік тому

    My faucet leaks when I use my washer. I’m no plumber but I know a thing or two about connecting washers. The male quick connect has teflon tape and a gasket, is it possible there is something wrong with the faucet?
    Please help.