@@fruitsquad_en Yes, my AmazonBasics HDMI to DVI cable works as well as my HDMI to DisplayPort cable from the same brand. I use them to connect my older monitor to my PC and Xbox. The brand should not matter, tho, since those three standard are digital and don't need converters or adapters to work together.
@@elmerestelon9374 Bluetooth speakers/soundbar. I couldn't find a working HDMI to DVI+Audio adapter anyway, so if you're gonna use the DVI port of your monitor, Bluetooth audio seems like the best solution. If your monitor has a VGA port, then use an HDMI to VGA+audio adapter. Tho that comes with the hassle of worse (analogic) video quality and using adapters.
Hi sir ask ko lang pano po ba gagaawin pag minsan po kc bigla bibitaw s wifi yung box. Ganon po kc akin. Ni rerestart ko lang para ma connect ulit. Bat po kaya ganon. Tnx hope u can help.
Hello , there is USB connection on android tv box , can we connect usb powered amplifier in it ? Will the ampere will be sufficient at higher volume , please advise, TIA
Your android box should have an available aspect ratio of 4:3 with a corresponding resolution options. In some cases, some cheap android boxes do not support this. I guess this has something to do with the low end gpu installed on these type of boxes.
Hi? I tried different cables po but same error no video showing naka sleep lang palagi. I have vga to hdmi connector hindi po sya na read. 2nd cord is display connector to hdmi pero ayaw parin po. Dell monitor po gamit ko trying to connect to cignal box from pldt. Sana po mapansin😢
Hello po. Ask ko lang po, paano kapag biglang nag-out of range yung monitor while connecting to smart box. Actually, napagana pa po namin sya nung tinesting namin pero nung ililipat na namin sya sa kwarto bigla po may napindot kami sa display resolution naging cause para mag-out of range sya. Badly need help po. Thank you po.
Tropa gamit ko yung kulay puti na converter.. Tas kapag yung swich sa tabi nilagay ko sa 1080p.. Lalabas sa monitor not supported mag digital na daw.. Yung converter na av2vga.. So pede ba na maglagay sa dulo ng vga na dp o dvi tas dun saksak sa mga yun..? Ok naman lahat may audio may video. Pero kapag nilagay ko na dun ayaw na. Vga dvi dp yung mga ports ko wala hdmi
Yung av2vga na adapter bro uses an analog conversion. Pwede siya from rca to vga kapag hindi ganun kalaki ang resolution. Pag sinakdakan mo siya ng vga2dp or vga2hdmi, may conversion ulit yun from analog to digital, na pwedeng magcause ng latency, or delay na tinatawag. Hindi advisable ang ganitong setup. May puti na convertor na av2hdmi na available din, nagamit ko na ito noon and it worked for me.
@@ThinkFrugal salamat tropa.. Kasi naisip ko yung dulo yung nakasaksak sa monitor na vga.. Ano kaya kung palitan ko ang cable.. Yung vga to dvi-d yung 24+1 Kasi nag papa switch daw sa digital kapag nilagay ko na sa 1080p yung puti na converter.. Wag ko na nga galawin.. Ok naman na gumagana naman na sa 1280x720p.. Salamat na lang tropa..! 👍😊
@@chrischanchannel1318 Sadly, ganun din ang mangyayari bro, DVI is also digital kaya magkakaroon din ng 2-process conversion. Mas mainam yung av2hdmi yung gamitin mo bro if you really want the 1080p, dahil isang conversion lang ang mangyayari. Tingin ko bro 720p is quite ok, 1080p will just be an upscaled version. Di ganun kalaki yung quality difference dahil galing sa composite video yung source, smudgy pa rin ang magiging outcome. Kung yung device source mo ay may component ports (Additional red, green and blue ports), may component2hdmi din na available. Mas higher ang quality nito.
Great content Sir, question lang bka my Idea lng kayo base nadin sa expertise nyo and experience. I know di nyo prinopromote ung fake na mxq pero, since na test nyo nadin po, nabili ko ksi fake na mxq pro 4k 5g working xa pra sa basic needs ko, but now I wanted to play retro games using the fake mxq pro, yung emulator at games na gamit ko working naman problem ko ung controller. I tried using PS4 controller and usb universal controller pero di xa nag wowork sa mxq pro (both controllers are working using desktop) tingin nyo sir no kya issue? Bali ung mga usb port na pinagsaksakan ko ng controller nakakapg read naman xa flash drive so I'm sure why not working khit dongle ayaw. Looking forward po sa insight nyo Sir
Hello sir. I connected my mxq pro to my dell monitor hdmi naman sya. It works. But when i returned it to my cpu, the monitor wont read it anymore. I tried using different monitor and it worked on my pc. So is there any posible that may monitor was distroyed?
hello sir nag try ako nito sa monitor ko na hp, ginawa ko yung first tutorial mo na vga to hdmi all set naman po ng tama ang lumalabas naman po ay input signal out of range change settings daw sa screen ng monitor eh yung monitor ko is okay naman naka set naman sa ganung settings ano po kanyang problema pag ganitong error ang na incounter? salamat.
Hi there. Most of the time, resolution mismatch ang ganitong klase ng error. Nadedetect na ng monitor ang signal ng android box, pero di lang nito mai-output sa monitor. Try niyo pong iconnect sa ibang tv, then make the necessary adjustments sa resolution (720p at 60hz usually works). Ano po pala yung model ng monitor niyo?
Ibat ibang stores po ako bumili. At yung isang mxq pro 4k 5g na nabili ko ay fake, kaya medyo mahirap pong magsuggest ng shop. Kung bibili po kayo,.mairerecommend ko po ay yung strong leap s1 at may official store din siya sa lazada at shopee. Timingan niyo na lang po na nakasale pag bibili kayo, around 1999php siya kapag sale.
If you have tried this on two televisions (NOT Monitors), the following could be the possible reasons why you are getting the "no signal" error: 1. HDMI cable might be defective, try using a different cable 2. The device you are connecting to the television might have the wrong resolution settings. The device and the television resolution must match. 3. The device you are connecting to is already defective. Please ensure that you can successfully connect to a television first, so we could strike out all the possible reasons mentioned above.
I think you explained it best out of all the videos on UA-cam. Thanks!
I think so tooo
You deserve an award
so much helpful. i was looking to convert my 10 year old vga monitor into an android/smart tv. THANKS. God bless you
Hey a new Think Frugal video! Nice
Thanks! Been very busy lately... Hoping to upload more videos soon =)
Pro tip, there are DVI to HDMI cables. If your monitor has a DVI port, get one of those to avoid adapters that may need extra power.
Does it work? thanks
@@fruitsquad_en Yes, my AmazonBasics HDMI to DVI cable works as well as my HDMI to DisplayPort cable from the same brand. I use them to connect my older monitor to my PC and Xbox.
The brand should not matter, tho, since those three standard are digital and don't need converters or adapters to work together.
how about the audio?
@@elmerestelon9374 Bluetooth speakers/soundbar.
I couldn't find a working HDMI to DVI+Audio adapter anyway, so if you're gonna use the DVI port of your monitor, Bluetooth audio seems like the best solution.
If your monitor has a VGA port, then use an HDMI to VGA+audio adapter. Tho that comes with the hassle of worse (analogic) video quality and using adapters.
Exactly what I'm looking for. Thank you!
Thanks. Very detailed and clear explanation.
Thank you! Very helpful! You did great!
Thanks for this tut bro, you are my saviour 😊
Thanks man, helped me a lot.
Thank you!
Its so much helpful 🥰
Hi sir ask ko lang pano po ba gagaawin pag minsan po kc bigla bibitaw s wifi yung box. Ganon po kc akin. Ni rerestart ko lang para ma connect ulit. Bat po kaya ganon. Tnx hope u can help.
Very helpful, Thanks!
Paano po siya na connect sa internet
Nice explain bro💝💝💝
Love from Bangladesh ❣️❣️❣️
Excellent explanation
Tru sir you're Grate hearts 💕 of Electronic and love you 😍
Hello , there is USB connection on android tv box , can we connect usb powered amplifier in it ? Will the ampere will be sufficient at higher volume , please advise, TIA
Sir ask lang bakit ung akin lumalabas input signal out of range nakalagay. Ung vga to hdmi gamit ko with audio din.
i cam't have 4:3 resolutions on mime, its says unsupported resolution and turns off monitor. any help?
Your android box should have an available aspect ratio of 4:3 with a corresponding resolution options. In some cases, some cheap android boxes do not support this. I guess this has something to do with the low end gpu installed on these type of boxes.
Sir pano po kung gagawin ko syang monitor sa karakoke san ko isaksak yung aux in na galing sa speaker sir?
Hello boss paano nman kung sa cellphone micro usb android to vga ano need na medyo hindi mahal
Hi? I tried different cables po but same error no video showing naka sleep lang palagi. I have vga to hdmi connector hindi po sya na read. 2nd cord is display connector to hdmi pero ayaw parin po. Dell monitor po gamit ko trying to connect to cignal box from pldt. Sana po mapansin😢
Sir pano nmn po paganahin kung walang hdmi at A/V ang tv like s tv ko n usb at antenna lng un saksakan sa likod
It has the av output in the tvbox itself can we put the speaker inside the tvbox av output?
why mine is input not supported i even connect it right.
Set it to the resolution fit to your monitor
How to set?@@shinotenshi5466
THANKS, this video is very helpful.
Hello paano if lumabas sa monitor is input signal out of range?
my moniter support only 1366X768 resolution so how to connect success fully mxq Android box
Sir what about square monitor...its not run😢..because of type of output screen
Thank you so much, Sir
Hello po. Ask ko lang po, paano kapag biglang nag-out of range yung monitor while connecting to smart box. Actually, napagana pa po namin sya nung tinesting namin pero nung ililipat na namin sya sa kwarto bigla po may napindot kami sa display resolution naging cause para mag-out of range sya. Badly need help po. Thank you po.
Sir gagana kaya pag iton ang optimum resolution nya 1366 x 768 @ 60hz
Thanks a lot for the video
Monitor HDMI is now unusable after plugging it into an Android Box. No signal Detected when plugging it back to PC.
SIR MAKE A NEW VIDEO ABOUT
MIRA-CAST ON HOW TO FIX THE PROBLEM ABOUT BLACK BARS
Or pwede ba sya icast sa cp sir? Pano?
Hello po , Have a nice day yun MXQ pro local channel " UNABLE TO PLAY " . How to solve or fix ? Pls HELP !
Thanks 👍
Hi, paano po tanggalin ang input not support?
Meron me nyan adapter.gumagana sa windows pero sa android not supported input lumalabas
bro are you philipines?
lol
Help only input not support are appear in my monitor
Skyworth leap s1 please review this product
boss anong app gmit mo pang retro gaming
That specker adopter not supported to my monitor
sir input not supported nakalagay sa acer monitor ko paano ba ito?
Thank you
Will this support 1080 with 60hz
Tropa gamit ko yung kulay puti na converter.. Tas kapag yung swich sa tabi nilagay ko sa 1080p.. Lalabas sa monitor not supported mag digital na daw.. Yung converter na av2vga.. So pede ba na maglagay sa dulo ng vga na dp o dvi tas dun saksak sa mga yun..? Ok naman lahat may audio may video. Pero kapag nilagay ko na dun ayaw na. Vga dvi dp yung mga ports ko wala hdmi
Yung av2vga na adapter bro uses an analog conversion. Pwede siya from rca to vga kapag hindi ganun kalaki ang resolution. Pag sinakdakan mo siya ng vga2dp or vga2hdmi, may conversion ulit yun from analog to digital, na pwedeng magcause ng latency, or delay na tinatawag. Hindi advisable ang ganitong setup. May puti na convertor na av2hdmi na available din, nagamit ko na ito noon and it worked for me.
@@ThinkFrugal salamat tropa.. Kasi naisip ko yung dulo yung nakasaksak sa monitor na vga.. Ano kaya kung palitan ko ang cable.. Yung vga to dvi-d yung 24+1 Kasi nag papa switch daw sa digital kapag nilagay ko na sa 1080p yung puti na converter.. Wag ko na nga galawin.. Ok naman na gumagana naman na sa 1280x720p.. Salamat na lang tropa..!
👍😊
@@chrischanchannel1318 Sadly, ganun din ang mangyayari bro, DVI is also digital kaya magkakaroon din ng 2-process conversion. Mas mainam yung av2hdmi yung gamitin mo bro if you really want the 1080p, dahil isang conversion lang ang mangyayari. Tingin ko bro 720p is quite ok, 1080p will just be an upscaled version. Di ganun kalaki yung quality difference dahil galing sa composite video yung source, smudgy pa rin ang magiging outcome. Kung yung device source mo ay may component ports (Additional red, green and blue ports), may component2hdmi din na available. Mas higher ang quality nito.
where to buy po the android box?
Hi thx for the video 😮😮
Hello, if monitor has HDMI port will the display work if I connect the HDMI port from smart box to Monitor?
Yes, it will work. Your monitor must have a built-in speakers for it to be able to output the sound from your smart box.
@@ThinkFrugal Thank you.
nice tutorial
Great content Sir, question lang bka my Idea lng kayo base nadin sa expertise nyo and experience. I know di nyo prinopromote ung fake na mxq pero, since na test nyo nadin po, nabili ko ksi fake na mxq pro 4k 5g working xa pra sa basic needs ko, but now I wanted to play retro games using the fake mxq pro, yung emulator at games na gamit ko working naman problem ko ung controller. I tried using PS4 controller and usb universal controller pero di xa nag wowork sa mxq pro (both controllers are working using desktop) tingin nyo sir no kya issue? Bali ung mga usb port na pinagsaksakan ko ng controller nakakapg read naman xa flash drive so I'm sure why not working khit dongle ayaw. Looking forward po sa insight nyo Sir
Hi Dingdar. So far nagagamit ko naman ang usb controller using retroarch app. Anong emulator gamit mo bro?
@@ThinkFrugal thank you for quick response, Epxse emulator. I will try retroach Sir, update kita incase mag work or hindi, thank you sir
@@ThinkFrugal follow up question pla sir since working retroarch nyo, dun nyo po ba nasubukan sa fake na mxq pro un?
How to fix out of range problem
History class
Hi ask ko lang paano pla mag delete copy paste sa mbox using Yung mini keyboard salamat
May menu sa mismong file browser app to copy, cut and paste.
Pag CRT monitor hdmi to vga ayaw gumana
So how can i power all of this separately using a battery or something?
Hello sir. I connected my mxq pro to my dell monitor hdmi naman sya. It works. But when i returned it to my cpu, the monitor wont read it anymore. I tried using different monitor and it worked on my pc. So is there any posible that may monitor was distroyed?
ano update boss? na ayos mo?
hello sir nag try ako nito sa monitor ko na hp, ginawa ko yung first tutorial mo na vga to hdmi all set naman po ng tama ang lumalabas naman po ay input signal out of range change settings daw sa screen ng monitor eh yung monitor ko is okay naman naka set naman sa ganung settings ano po kanyang problema pag ganitong error ang na incounter? salamat.
Hi there. Most of the time, resolution mismatch ang ganitong klase ng error. Nadedetect na ng monitor ang signal ng android box, pero di lang nito mai-output sa monitor. Try niyo pong iconnect sa ibang tv, then make the necessary adjustments sa resolution (720p at 60hz usually works). Ano po pala yung model ng monitor niyo?
Sir model ng monitor ko ay aoc e1670swu
Ayaw din ya out put din kahit set ko na ibang reso
bakit input signal naka llagay Hindi yata gumagana sinonod ku Naman lahat nga sinabi
Saan shop po kayo bumili ng android box?
Ibat ibang stores po ako bumili. At yung isang mxq pro 4k 5g na nabili ko ay fake, kaya medyo mahirap pong magsuggest ng shop. Kung bibili po kayo,.mairerecommend ko po ay yung strong leap s1 at may official store din siya sa lazada at shopee. Timingan niyo na lang po na nakasale pag bibili kayo, around 1999php siya kapag sale.
Upload the video about imstall linux on x96 please
how about dell monitor to convert into smart tv pls help
Have you figured out anything?
Pano pag not supported ang lumalabas sa monitor?
ganun din sa akin not supported
Tried it on my TV but it says no signal infact I tried it on 2 TV and it's saying no signal. I need help please
If you have tried this on two televisions (NOT Monitors), the following could be the possible reasons why you are getting the "no signal" error:
1. HDMI cable might be defective, try using a different cable
2. The device you are connecting to the television might have the wrong resolution settings. The device and the television resolution must match.
3. The device you are connecting to is already defective.
Please ensure that you can successfully connect to a television first, so we could strike out all the possible reasons mentioned above.
Well I bought the hdmi to vga yesterday and the vga cable yesterday so they are both new
And I tried it on 2 tv so am not sure whats wrong but am wondering if the power from the android box isn't strong enough
Using a xtc363 hdmi to vga and a xtc308 vga cable
Android box is a mxq pro 4k
V good
Not supported
🐼
Thomas Cynthia Martinez Dorothy Moore Shirley
Smith Betty Brown Larry Garcia Frank
10$ aint that cheap
*As a broke little sh!t*
The worse ever android box ,I prefer xaiomi
Hello sir how can I contact you?
Sure
My Monitor keeps flickering and says auto configuration.. help plz