Це відео не доступне.
Перепрошуємо.
Pattern IMPRINTED CONCRETE Cleaning, Colouring, Sealing & Repairs 'EXPERTS GUIDE'
- Додати в
- Мій плейлист
- Переглянути пізніше
- Поділитися
Поділитися
Вставка
Розмір відео:
- Опубліковано 17 сер 2024
КОМЕНТАРІ • 59
Наступне
Автоматичне відтворення
Imprinted Concrete Driveway Cleaning & SealingJetOWash
Переглядів 42 тис.
Block Paving Cleaning & Application of Sealer - The EXPERTS GUIDE - Sealing Brick PaversSmartseal UK Ltd
Переглядів 532 тис.
How To Re-Colour & Repair a 20yr Old Pattern Imprinted Concrete Drive (Ep.7)Smartseal UK Ltd
Переглядів 67 тис.
skibidi toilet 77 (part 1)DaFuq!?Boom!
Переглядів 19 млн
«Ми так війну не закінчимо ніколи»: 22-річний морпіх про те, чому їм потрібні молоді #війна #зсуСлідство.Інфо | Розслідування, репортажі, викриття
Переглядів 664 тис.
SCHOOLBOY. Последняя часть🤓⚡️КАН АНДРЕЙ⚡️
Переглядів 11 млн
Don’t Make These Errors! Sealing Small Concrete Cracks CorrectlyEveryday Home Repairs
Переглядів 991 тис.
How to clean, repair, re-colour and apply sealer to Patterned Imprinted ConcreteSmartseal UK Ltd
Переглядів 118 тис.
Invisible Crack Repair? Fix-A-Crack™ Stamped Concrete Crack RepairFix-A-Crack™ Concrete Crack Repair
Переглядів 89 тис.
Re-Colouring Imprinted Concrete? or Should You Use Clear Sealer? (Ep1)Smartseal UK Ltd
Переглядів 15 тис.
Sealing Stamped Concrete - Don't Make These mistakesMaple Farmer
Переглядів 131 тис.
Neighbors Laughed at the Innovative Building of our Small-House, But then they were AmazedCREATIVE COUPLE
Переглядів 63 млн
How to seal a patterned concrete driveUltimate Handyman
Переглядів 52 тис.
Customer Said This Was RIDICULOUS! This Transformation Was INSANE!Pristine Pressure Cleaning
Переглядів 2,1 млн
Worst Sealer Mistakes And How To Avoid Them | Hardscape Training | Alliance Gator EducationAlliance Gator Education
Переглядів 110 тис.
бедный дед на ламборгини проверяет силу прохожих и платит за подъем гириABRACADABRA TV
Переглядів 8 млн
Втрачене дитинство | GOVOR TikTok #govor #shotsGOVOR
Переглядів 417 тис.
Ядерное озеро #ссср #россия #пермьПослезавтра
Переглядів 4,6 млн
Удар по російській колоні в Курській області #shorts #війна #курськ #арміярфBBC News Україна
Переглядів 811 тис.
Можно ли пропускать завтрак? #эндокринолог #питание #диеты #правильноепитаниеВлад Аганов
Переглядів 3,9 млн
Для кого жиза?Анджилиша
Переглядів 2,4 млн
Didn't know what make to buy as so much choice. Video just confirmed it will be smart seal. Thank you
Just had a phone call off Nigel, he really knows his stuff and must say great advice. I only had my patio done in march and it looks a mess, so il do what Nigel recommends and go from there. Thanks smart seal!
Thanks for your comment Tina. Much appreciated. Regards, Josh@Smartseal
Absolutely fantastic customer support. Excellent product doing exactly what it says it will.
Appreciate your feedback Bobby. Regards, Rick@Smartseal
Excellent informative video.
Much appreciated pal 👍
Really apply your feedback, Thanks, Rick@Smartseal
Great video thanks.
Glad you liked it!
Many thanks, Josh@Smartseal
is there any distributor in canada
let me know i would like to buy
Hi there, we currently don't have distribution to Canada. But we are looking to expand to North America in the near future. Kind regards, Josh@Smartseal
Great video!!
Are we able to turn a red driveway black/grey by just adding colouring with the sealant or is there more to it when changing colours? Thank you
Hi Josh, this can be achieved in some instances , but it is best to take advice specific to your driveway before proceeding- if you send some pictures here - www.smartseal.co.uk/help-advice/send-us-your-pictures.htm
we can advise further. Hope that helps, Josh@Smartseal
excellent video
Thanks Gareth, hope the video helps you maintain your own imprinted concrete. Regards, Rick@Smartseal
hi Nigel I was toldto put a thin layer of thinners on my drive first letit dry then seal it is this correct, as mine looks like your black/grey drive you showed us and I'm is the same colour best wishes Colin
Hello Colin, thanks for watching the video. Personally I would only apply a layer of 'thinners' prior to applying new sealer, if I was concerned about some kind of issue with the appearance of the surface or previously applied sealer. If you require specific advice, feel free to send us some pictures www.smartseal.co.uk/help-advice/send-us-your-pictures.htm Hope that helps, Regards, Nigel Blake Smartseal UK Ltd
Absolutly supherb video
We really appreciate your positive feedback Kim, thanks very much. Regards, Rick@Smartseal
Great vid one best iv seen for this
Glad you found the content useful Chris. Regards, Rick@Smartseal
Given me some confidence to try it.
How long does it take to dry? If it rains what happens?
You should apply when there is no rain forecast for at least 4 hours Arthur. Regards, Josh@Smartseal
great stuff met the man him self well recomended well worth paying for the extra AND NOT going for acheaper alternative and he sorted me out with a good kit....10 out off 10
Thanks for your comment. Regards, Josh@Smartseal
thanks very informative video cheers
Much appreciated Barrie, thanks for your comments.
I find the sealer tint harder to use in warmer conditions as it sometimes stops the sealer gassing out with being slightly thicker and sometimes leaves little bubbles in the deeper part of the imprint where the sealer settles, what’s your feedback on this please if any ?
TIA
Hello Martin, thanks for your comment. Certainly I agree, the colour should always be used sparingly and can thicken the sealer, particuarly in warmer temperatures. The bubbles are a result of excess sealer, sitting in the joints in higher temperatures.
Always try and remove the excess with a broom and avoid working in direct sunlight if the weather is quite warm. Hope that helps, Nigel@Smartseal
Can the final coat be mat. Or does it need to be Satin?
The final coat can be Matt Dawn. The Silk would give a greater lifespan (because it contains a higher % of resin) and would dull down over time. Hope that helps. Joshua@Smartseal
Hi, is it normal for rainwater to bead after the sealer is applied?
It will bead for a while Shaf, but this will reduce relatively quickly, and will not be an issue over time. Regards, George@Smartseal
Hi can the colour ever be changed? I bought a property in 2018 that had recently had a brown imprinted concrete garden it’s been down around 8 years now had no sealer treatment since I moved in. I’m Looking at a dark grey colour to match the exterior paintwork on the house any advice would be greatly appreciated.
It can be in some circumstances Colin, its best to send some pictures to us, via contactus@smartseal.co.uk
and I will advise. Regards, Nigel@Smartseal
can you not use a roller instead ?
it,s been 2 years but want to reseal again to hide the areas that have gone light such as around the bin areas and around the side door area . The dark grey alot lighter in these areas
Would it also be possible to use imprinted concrete sealer on Indian sandstone if not why not please ?
It is possible, but not advisable Mike. This is due to the porosity of indian sandstone which can make it sensitive to solvent based acrylic sealers. We do have a range of products specifically formulated for natural stone on our website. Hope that helps. George@Smartseal
Ive just watched your short videos, very helpful thank you. My concrete imprint is about 4 years old. Its a grey slate colour with black edging. I want to reseal it this week. Please could you post a link to the sealer ill need. Its about 60 square meters... Id like a nice shiny affect sealer.
Thanks in advance
Also, how often should the rubber be replaced
Hello Martin, this would be the product I would recommend. www.smartseal.co.uk/sealers/imprinted-concrete-sealer/imprinted-concrete-sealer-gloss-finish.htm 1 x 25 litres SILK sealer- this should be enough for two coats to 60m2. After four years, with average wear and tear, I would suggest two coats is about right, if you have a little bit left over, give the hardest wearing areas a third coat. Hope that helps, Nigel@Smartseal
@Matt Westby Hi Matt, thanks for getting in touch. Personally, I would always recommend the SILK/Wet look for resealing, unless colour is a necessity. The gloss sealer is quite thick and should only be applied sparingly as a 'one coat ' product. Bubbles on the surface would have been caused by a little bit of over application. Hope that helps, Nigel@Smartseal
My chaps laid and imprinted the drive last week. They are due to attend to seal, is it a full day job and how many coats should they do? Its similar size to that slate drive.
Is there not anti slip in the sealant as standard?
Hello E, Gold, thanks for your question. No, the anti slip additive should only be added to the final coat, it would not have any benefit in initial applications of sealer. Hope that helps, Josh@Smartseal
I have bought a colour enhancer for my brick driveway. I have done the edge of grey bricks but am not happy with the result. I wish I'd seen your product first! Would you advise using your product on top of it or will I need to jet wash it first?
Hello Margaret, to give an opinion and provide advice, we would require more information about the product applied and ideally some pictures. Please make an enquiry via this link- www.smartseal.co.uk/help-advice/send-us-your-pictures.htm Regards, Nigel@Smartseal
Hi There
How to repair deep part where water reserve
Please send a picture, we will try to advise, email - contactus@smartseal.co.uk Regards, Jake@Smartseal
Thanks for the video! I have some concrete stairs which have been patched thus having parts with totaly different color in the concrete. Non of the concrete has been colored previously. Would it work using a sealer with some pigment in it to get a uniform color?
Hi JN, if you could send a picture to contactus@smartseal.co.uk we can then correctly advise. Regards, Nigel@Smartseal
Thanks!
Can this be used on paving flags
It can Joyce, but we do have a dedicated 'patio sealer' for concrete paving flags on our website. Regards, Rick@Smartseal
cant it be spray applied
Hi, thanks for your question. It can be, broom is recommended as it enables excess to be swept out of joints and not wasted. Also if anti slip or any colour is used, this will clog up the sprayer. Hope that helps.