How this video only has a couple hundred likes is beyond me... I found it to be suuuuper helpful! Definitely makes the process seem less intimidating. I'm puting together materials for my first retrofit now! Thank you for sharing your knowledge! 🙏🏽
Wow, this is the best retrofit video that I’ve ever seen, I’m going to do my first retrofit headlights and definitely I’ll be doing it based on your video! Thanks!!!
Awesome job! I replaced old projectors with new ones in my BP Outback, however that was an easy job - it had projectors already. But I am looking at upgrading my SG Forester, which has only reflectors and you'll be my guide :-) Thank you!
Tip: when splitting the light if there is loads of glue strings, get an old drill bit on eletric drill and just spin it and drag it thru it all, will collect it all on the drill bit, can put something else in there like a stick or something if you don't want to ruin a drill bit Also search clip removal pliers or Trim Removal Pliers they are exactly the same, and like $4 rather than paying the $17 or whatever they are
I enjoyed your total retro-fit projection very nice and clearly demonstrated. I currently own a 2018 Toyota Camry SE. Now it has an LED low beam/high beam single projection system. However, I would like to convert the DRL reflector section to a laser beam or another LED, projector install. So, if you were to look up the 2018 Camry headlights you can see what I am describing to you. I think what I would like to do is get an extra set of headlights for this vehicle and try it on there first in case there may be some issues I'm not left without any headlights. Also, I was anticipating some night shots of your end results that would have been cool to see the outcome in night conditions. Otherwise, great content
Amazing video! Curious - it looks like you only used the nylon spacers on some of the bolts on the inside of the bowl, but not others - was there a reason for this, and how did you decide which ones? I'm guessing this had something to do with adjusting the position of the lights, but I didn't pick up exactly how you did that . Thanks for making this video - it's really great, and your work was super clean.
Hi Nolan! Nice Video. I love your XXR 530 Rims, I'm thinking to buy ones for my Forester XT 2017 but I'd like to know the wheel and tire size you have on your car. Thank you
Thank you Nolan for the video! Great work! Just wondering if the 4 bolts will hold the weight of the projector over time, considering the Forester is driven not only on asphalt but on trails (light off-road/vibrations). I would appreciate your comments about this.
Great job! I'm using this video for my retrofit! I've got a couple questions, I've ordered the iris shroud as well and am wondering if you had to do any trimming of the shroud? Also did you use the inner clips of the shroud to snap onto the projector, or did you cut those off and recess it even further? Much appreciated! :)
Nombre!!! I wouldn’t take the time to bake and cut up the stock light fixtures. I’d really f__ that up!!! I feel more comfortable upgrading the stock halogen fixtures with the better OEM DRL projector light fixtures, rewriting, hacking, and re-programming electronic modules & sh_, just to be able to power those high end luxury light fixtures. I would’ve been researching which body control modules are high end, and if they can be re-written with my car’s vin, then getting the necessary wires, harnesses, housings, tools, relays, wire picks, etc.
You can use a heat gun which can be bought for cheap.I've done a bunch of retrofits in the past and the baking method rarely works like the heat gun method
That’s a projector retrofit done right: -looks better but still OEM like -properly fitted -wider brighter and more focused beam pattern -improves visibility and aesthetic while reducing glare
@@nolantsuchiya6602 Believe it or not im actually doing it. Just started on opening the headlights. Hows your d2s 5.0? did you get the CBI 5500k as bulb? hows the output as of now? your video is really helpful.
As a professional retrofitter, you did a fantastic job. You did exactly what I would do for any customer and did a great job explaining it all.
@koolkevin1107 hey how much you charge for this setup plus the C lights
Is it ok to bake the headlight with clear plastic cover instead of glass? If yes, what might be the temp? Im planning to diy retrofit my hl. Thanks
@@royaprilsobre video said 250F for 8min, but others have experimented with different settings. No need to worry about the plastic lenses
@@nolantsuchiya6602 ty so mch for the info sir.
@koolkevin1107 Hi can you give an advice because I have an old Ford everest 2018 trend variand suv. What is best type of lamp can you suggest?
Diagonal cut spacers were a genius idea!
How this video only has a couple hundred likes is beyond me...
I found it to be suuuuper helpful! Definitely makes the process seem less intimidating. I'm puting together materials for my first retrofit now!
Thank you for sharing your knowledge! 🙏🏽
Ha, thx. Glad it was helpful. Not expecting a ton of traffic on this channel as I don't regularly upload. If it helps a few people, I'm happy.
Best diy retrofit videos i seen so far and even show and explain the nuts and bolts methods which i was struggling to find a videos of
Same here, that’s why I tried to show the nut bolt method in detail. Hard to explain without good video
Looks very OEM. Fantastic retrofit. Also you did a great job showing the process of retrofitting.
Just in time! Glad I've found this video before my retrofit kit arrives :D Subbed!
Wow, this is the best retrofit video that I’ve ever seen, I’m going to do my first retrofit headlights and definitely I’ll be doing it based on your video! Thanks!!!
Maybe one day I’ll actually attempt doing this to my car.
As a mathematician I congratulate you on the geometry tricks! 👌
Best retrofit I have seen
This video gives me so much more confidence in doing my own retrofit.
Awesome job! I replaced old projectors with new ones in my BP Outback, however that was an easy job - it had projectors already. But I am looking at upgrading my SG Forester, which has only reflectors and you'll be my guide :-) Thank you!
Tip: when splitting the light if there is loads of glue strings, get an old drill bit on eletric drill and just spin it and drag it thru it all, will collect it all on the drill bit, can put something else in there like a stick or something if you don't want to ruin a drill bit
Also search clip removal pliers or Trim Removal Pliers they are exactly the same, and like $4 rather than paying the $17 or whatever they are
This is so technical.
I love it
I enjoyed your total retro-fit projection very nice and clearly demonstrated. I currently own a 2018 Toyota Camry SE. Now it has an LED low beam/high beam single projection system. However, I would like to convert the DRL reflector section to a laser beam or another LED, projector install. So, if you were to look up the 2018 Camry headlights you can see what I am describing to you. I think what I would like to do is get an extra set of headlights for this vehicle and try it on there first in case there may be some issues I'm not left without any headlights. Also, I was anticipating some night shots of your end results that would have been cool to see the outcome in night conditions. Otherwise, great content
Amazing video! Curious - it looks like you only used the nylon spacers on some of the bolts on the inside of the bowl, but not others - was there a reason for this, and how did you decide which ones? I'm guessing this had something to do with adjusting the position of the lights, but I didn't pick up exactly how you did that . Thanks for making this video - it's really great, and your work was super clean.
This is gold 👌
Happy retrofitting
Direct to the NASA.
Great video explaining the nut and bolt method, not a common video, greatings from mexico
Thanks! It does seems tough to find info on it.
Good video, explained everything 😊
Man we need a tutorial on wiring, That is the part that is tricky in my opinion.
You are awesome. Thank you for sharing your retrofit in detail. It is very helpful. God bless you.
Bro that was a super clean work 😻❤️
Hi nolan why you didn’t t put the headlights in the ovenn after applying new butyl sealant?
great work! you can even do a quad setup to make it insane!!
Very interesting clip for whom that want to DIY.
Great 👍 job! I've done some retrofitted for my friends and mine car's too
Where do u put solenoid cable,if i use only for low beams,its not necessery to put it,right?
I’m looking for a kool upgrade for a 2001 dodge van,, yall got any ideas
You can use Plastic wrap the outside plastic to protect it when working with it :)
Dumb question can we instead just buy the 2018 forester headlight assembly will it not fit a 2014 sj forester?
Excellent Job!
great tutorial
Hi Nolan! Nice Video. I love your XXR 530 Rims, I'm thinking to buy ones for my Forester XT 2017 but I'd like to know the wheel and tire size you have on your car. Thank you
Very nice Professor
Wow great work !
Great video
thats nice man
Thank you Nolan for the video! Great work! Just wondering if the 4 bolts will hold the weight of the projector over time, considering the Forester is driven not only on asphalt but on trails (light off-road/vibrations). I would appreciate your comments about this.
It’s a year later now, and I’ve had no issues. I hope to never need to open these again. No condensation or anything so far
Great job! I'm using this video for my retrofit! I've got a couple questions, I've ordered the iris shroud as well and am wondering if you had to do any trimming of the shroud? Also did you use the inner clips of the shroud to snap onto the projector, or did you cut those off and recess it even further? Much appreciated! :)
You forgot to mention that while the headlights are baking the wife better not be home 😅
Hey... it's the bike guy....what don't you do :)
Nombre!!! I wouldn’t take the time to bake and cut up the stock light fixtures. I’d really f__ that up!!!
I feel more comfortable upgrading the stock halogen fixtures with the better OEM DRL projector light fixtures, rewriting, hacking, and re-programming electronic modules & sh_, just to be able to power those high end luxury light fixtures. I would’ve been researching which body control modules are high end, and if they can be re-written with my car’s vin, then getting the necessary wires, harnesses, housings, tools, relays, wire picks, etc.
You can use a heat gun which can be bought for cheap.I've done a bunch of retrofits in the past and the baking method rarely works like the heat gun method
hi good day really nice your video, can u please tell me the name of the glue you use for sealing the headlight,
Look on theretrofitsource.com or lightwerkz.net
Its a butyl rubber sealant
looks neat nice job
That’s a projector retrofit done right:
-looks better but still OEM like
-properly fitted
-wider brighter and more focused beam pattern
-improves visibility and aesthetic while reducing glare
Right on
So, Geometry has practical uses after all.
I have questions! This is an awesome job! Mind if we get in Contact!? I plan on doing this with my 14 FXT touring model!
Sure. You can connect through nolantsuchiya.com
From where did you get the nylon spacers, and what sizes did you use?
Just hardware store.
Try going back to oem ballast
I learn something good
GO SHARKS
Check out: Subaru OFFROAD Australian Sand
The bmw e46 was easy to open it don't have a seal like this and never gets water in it not sure why other car companies make it like this?
It would have been perfect had you shown the projector in action.
Uh he did at the beginning. Look again.
You u don't need to drill nothing if u was using the retrofit minih1
Nicely explained! If I can only hire you to do it on my '17 premium! Hit me up! Lol
Wish I had the time.. Ha!
@@nolantsuchiya6602 Believe it or not im actually doing it. Just started on opening the headlights. Hows your d2s 5.0? did you get the CBI 5500k as bulb? hows the output as of now? your video is really helpful.
Taking shots at Subaru for those mediocre projectors
The lights are getting ridiculous. Just blinding everyone on the road.
When this is done right (and he did this right) this creates no more glare to incoming traffic than a stock vehicle