With this modification I see the whole u made its mot big enough to replace the crank sensor am I right? U not showing on the video how to fit the sensor
Great video I’m going to be doing this myself soon, I’ve ASZ stored in my garage for my Vw T5, this will be a great reference when Im doing mine, I’ve already done the 6 speed conversion, keep up the good work 👍🏻
Hey Tom, how did you get on with this? Just started my conversion. Trying to figure out if my oil filter housing is going to work with the asz, so much conflicting info.
@@keelanbarron2547 Hi Keelan I still haven’t got round to doing as I was weighing up the situation with clean air zones coming to Manchester, but I do have my engine, I would recommend getting the asz from a Skoda fabia which has the smaller oil filter housing, sure you can get other asz engines say a golf but that has a bigger oil filter housing which will hit the radiator pack and the oil filter housings are not interchangeable, hope that helps.
I have a Golf mk4 2.0 Petrol in brazil (here we dont have tdi from factory). and i got a MK5 1.9 TDI BKC Jetta engine and complete harness, ecu edc16, modules. how can i adapt in my car? it uses a bosch motronic 3.8.3. can i convert bkc edc16 to edc15 and follow the electrical schemes from golfs tdi atd/axr?? cause the schemes from mk5 are so differents, a lot of modules, can, etc..... which is the best way to adapt in my car without open the panel and change whole loom wiring? i think its just convert the pinout, but using a edc15... edc16 i dont know how. can i use BEW electrical scheme?
Hi pal, I'm doing a BXE to pd100 engine swap next week. The pd100 was already in my friends b6 Passat running 260 bhp with 2056 GTB turbo and paddle clutch
Hi, thanks for this Video. 5 just bought a BKC Engine to replace with on an AVQ that is bad. I tried starting and it is not working. Kindly assist me for I am lost. Thanks
do you ever do a PD - VE hybrid? PD bottom end and VE head? I just wanna see you're way of doing this thing. I know that VE is almost a dead platform but still is way cheaper(pump/nozzles) with same power levels.
I put on a passat b6 1.9 tdi arl, 1749vb turbine and 6speed fmh gearbox and I have traveled so far around 10k without problems the old engine consumes 15l oil in 15k so I decided to replace it with a rebuilt arl from 0
Boas Hélder, tenho um Audi a3 8p Pd 105, e tenho um motor pd130asz dum a3 8l para por o asz no bkc e só mudar o sensor como fizeste no vídeo? O resto é só ligar as fichas ?
@@HelderPutoPerformance ah ok, então tem que trocar a poli da cam bKC para o asz manter o sensor da cam bKC no asz e sensor da cambota do bKC no asz certo? E já agora tenho de manter os injetores BA pk a centralina não aprova outros, mudo só os bicos ?
I think the wiring will be ok, you will need to move over the cam sensor and the crank sensor. Also you would need to get it tuned quickly once it is all back together as it will run very rich because the ecu is tuned for 105 injectors, but you will have 130/150 injectors
Am sure thats a asz from a skoda vrs. Cz there are 2 asz engines. Thr only difference is the oil filtre housing, they are both different to the way they bolt to the engine
Hi I have changed my engine brs to asz but oil filter touching cooling fan. Any can advice which filter housing is best ?because housing from brs doesn’t fit asz. Need small housing any recommendations will appreciated thanks
Hi mate you can’t replace for small housing the fitting is not the same Or you have to change the size on the fan or change the block (ASZ seat Ibiza or Skoda Fabia ) by the way what car you fitting the engine on ?
I cannot thank you enough for this video, I didn’t think it could be done!!! Tomorrow is the day the drill comes out….. thank you my friend!!!!
Good luck 😉
With this modification I see the whole u made its mot big enough to replace the crank sensor am I right? U not showing on the video how to fit the sensor
Watching from Philadelphia, United States! Nice work.
Thank you
Great video I’m going to be doing this myself soon, I’ve ASZ stored in my garage for my Vw T5, this will be a great reference when Im doing mine, I’ve already done the 6 speed conversion, keep up the good work 👍🏻
Thank you 🙏
Hey Tom, how did you get on with this? Just started my conversion.
Trying to figure out if my oil filter housing is going to work with the asz, so much conflicting info.
@@keelanbarron2547 Hi Keelan I still haven’t got round to doing as I was weighing up the situation with clean air zones coming to Manchester, but I do have my engine, I would recommend getting the asz from a Skoda fabia which has the smaller oil filter housing, sure you can get other asz engines say a golf but that has a bigger oil filter housing which will hit the radiator pack and the oil filter housings are not interchangeable, hope that helps.
Have already done this jod from a cbha to atd engine here in greece.the linde forklift i installed it still works perfectly.
Nice
Do you have to change top boost hose and are you using short or long oil filter housing asz engine ?? Im half way through this convertion
Parabéns pelos Videos Helder, material didáctico de categoria .
Obrigado
Great channel. I love the content. What is the difference between the axb and bxe block? Are they interchangeable?
Same just different code
I like your videos thanks for posting it👍
Hello, what is the biggest differences between ASZ/BLT PD130 engines? Is any of them stronger from inside the ingine? Thanks a lot :) !
Hi did you have to change the ecu or does it read it as a 60 -2 crank wheel ?? Good on ya mate
I have a Golf mk4 2.0 Petrol in brazil (here we dont have tdi from factory). and i got a MK5 1.9 TDI BKC Jetta engine and complete harness, ecu edc16, modules. how can i adapt in my car? it uses a bosch motronic 3.8.3. can i convert bkc edc16 to edc15 and follow the electrical schemes from golfs tdi atd/axr?? cause the schemes from mk5 are so differents, a lot of modules, can, etc..... which is the best way to adapt in my car without open the panel and change whole loom wiring? i think its just convert the pinout, but using a edc15... edc16 i dont know how. can i use BEW electrical scheme?
Oil filter hausing in pd105 and asz od the same ? I do this swap now and oil filter hausing ja difrent ..
All depends with engine you have if is a ASZ from a seat Ibiza or Skoda fabia will be small housing
Hi pal, I'm doing a BXE to pd100 engine swap next week. The pd100 was already in my friends b6 Passat running 260 bhp with 2056 GTB turbo and paddle clutch
🙏🙏
Bonjour j'ai une question ...ma question est est t'il possible de m'être un moteur bxe dans un Seat Ibiza tdi 100 CV ...et elle vas démarre ou pas...
Hi, thanks for this Video. 5 just bought a BKC Engine to replace with on an AVQ that is bad. I tried starting and it is not working. Kindly assist me for I am lost. Thanks
How about camshaft sprocket or pulley does it need to be changed ?
Yes
Dalhe zeeeeeee... Top job💪💪💪
Do you need to change the crankshaft sensor still if you are using 02Q gearbox with an asz engine and fabia ecu (swapped from a Bxe mk2 Leon)
Yes
Fucking Legend exactly what i wanted thank you.👊
Thank you 😊
oil cooler what is it from? originally the oil sensor is on the other side? 2.0 bmm converted to 1.9 ASZ DSG in touran;)
Oil cooler is from pd130asz the oil sensor is on the original side
@@HelderPutoPerformance do you provide the filter base number? I have a 2001 engine
do you ever do a PD - VE hybrid? PD bottom end and VE head? I just wanna see you're way of doing this thing. I know that VE is almost a dead platform but still is way cheaper(pump/nozzles) with same power levels.
You need to drill and tape pd block for be idler for timing
I have a VW Touran 1.4 , 2008 TSI, and I would like to replace the petrol engine with a Diesel engine of 1.9 or 2.0 L. Is that a possible project?
Yes it’s possible
Hi I’m trying to do the same conversion but I need the short oil filter housing witch one have you used 👍👍great videos👍👍
Thanks
I put on a passat b6 1.9 tdi arl, 1749vb turbine and 6speed fmh gearbox and I have traveled so far around 10k without problems the old engine consumes 15l oil in 15k so I decided to replace it with a rebuilt arl from 0
hallo fellow, do you know how much hp can stock 2.0 tdi engine hold and same about the 3.0 because i wonder whotch one is the best for project
2.0 tdi hold 300 bhp 3.0 I don’t know
Boas Hélder, tenho um Audi a3 8p Pd 105, e tenho um motor pd130asz dum a3 8l para por o asz no bkc e só mudar o sensor como fizeste no vídeo? O resto é só ligar as fichas ?
Sim e tens que trocar a poly da cam tanbem
@@HelderPutoPerformance ah ok, então tem que trocar a poli da cam bKC para o asz manter o sensor da cam bKC no asz e sensor da cambota do bKC no asz certo? E já agora tenho de manter os injetores BA pk a centralina não aprova outros, mudo só os bicos ?
@@sharklinhac5940 certo Deicha os injetores do bkc e melhor se meter os dos 130 vai mancar e tens que reprogramar
@@HelderPutoPerformance muito obrigado Hélder! Abraço e continuação de bons vídeos
Hello I have Audi A3 Pd105 and I want to put pd130/150 engine in it can I use the pd130/150 Wearing and ecu ???
I think the wiring will be ok, you will need to move over the cam sensor and the crank sensor. Also you would need to get it tuned quickly once it is all back together as it will run very rich because the ecu is tuned for 105 injectors, but you will have 130/150 injectors
Yes you can but you need to modify the wiring loom on the car to fit your pd130 ecu
It’s easier to drill the block and fit a pd 105 crank sensor
does the crank sensor have to be changed to that? I have asz with an aluminium crank seal and I'd hate to change to that plastic one
Hi no you just need a sensor wiid the pickup ring
Thanks for sharing #helderPutoPerformance
Hi mate putting a arl engine in my t5 but oil cooler housing sticks out tried others but doesn't mount to the block same way
Hi 🖐️
Dealt with the problem ??
Loving the content man! Where are you guys based i need my engine work done if possible ?? 👍
Thank you I are in Peterborough
@@HelderPutoPerformance whats your contact number please 🙏?
Can this be done with the pd100 engine I have a good 100 engine and and my 105 head has gone
Yes
Thank you for the reply what timing kid did you order was it the 105 or the 130 thanks mate
Am sure thats a asz from a skoda vrs. Cz there are 2 asz engines. Thr only difference is the oil filtre housing, they are both different to the way they bolt to the engine
Hi I have changed my engine brs to asz but oil filter touching cooling fan. Any can advice which filter housing is best ?because housing from brs doesn’t fit asz. Need small housing any recommendations will appreciated thanks
Hi mate you can’t replace for small housing the fitting is not the same
Or you have to change the size on the fan or change the block (ASZ seat Ibiza or Skoda Fabia ) by the way what car you fitting the engine on ?
Do you know the part number for the tool
bom video parabens , continuaa!! qual a razão para meter edc16 e nao continuar com edc15?
eu também gostaria de saber isso voce ka soube
I have a bkc 105 cv can i change for one atd or axr
Yes
What tool did you use please?
Is on the video
Is there no way to adapt the bxe loom to use the asz sensor?
No
Its funny here in canada I have a pd100 engine version on a mk4 platform and running a edc16 from factory with the old style sensor like your pd130
Nice job, what is the reason to use edc16 ?
@@LUIS_SKILLA Yes right, you need edc16 for torque limitation
It would have been cheaper just to change the reluctor wheel on the crank and the sensor in the block then use that rear seal that cost a fortune
Has wiring to be change
You don't need special tool to fit seal!
Need to do this and or a 6 speed swap to my bkc engine
i have a bkc 205whp and i use 6speed manual from 2.0tdi bkd gearbox with 240mm clutch
@@atanasstamatov7333 this is what I need to do, just a pain having to pay others to do the work it all mounts up😂
@@atanasstamatov7333 what did you have to do to fit the 6 speed gearbox?
Boas amigo faz um video a trabalhar a cabeça do motor
muito top
Parece de origem porra 😂😂💪🏼
Lol swapped my ATD to ASZ 3 months ago
helder check your face book messenger
good video
dalhe ze nao e dalhe helder