Це відео не доступне.
Перепрошуємо.
How to Replace Headlight Wiring Harness 2007-2013 Chevrolet Silverado
Вставка
- Опубліковано 16 сер 2024
- Buy Now!
New Headlight Wiring Harness from 1AAuto.com 1aau.to/ia/DMZW...
This video shows you how to install a headlight wiring harness on your 2007-2013 Chevrolet Silverado.
This process should be similar on the following vehicles:
2007 Chevrolet Silverado 1500
2008 Chevrolet Silverado 1500
2009 Chevrolet Silverado 1500
2010 Chevrolet Silverado 1500
2011 Chevrolet Silverado 1500
2012 Chevrolet Silverado 1500
2013 Chevrolet Silverado 1500
Tools you will need:
• 10mm Wrench 1aau.to/oKv/1AX...
• 10mm Socket 1aau.to/oaJK/1A...
• 7mm Socket 1aau.to/oaJK/1A...
• Trim Tool Set 1aau.to/oTD/1AX...
• 1/4 Inch Ratchet 1aau.to/oaJK/1A...
• 3/8 Inch Drive Ratchet 1aau.to/oaZR/1A...
• Gloves 1aau.to/owW/1AX...
• Safety Glasses 1aau.to/ory/1AX...
• Utility Knife 1aau.to/ofC/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
I started this because one single low beam light on the driver's side wasn't working, and I determined it was the harness and not the light. I followed these instructions exactly for the driver side. And now nothing but the ambers work in the entire truck. Wth did I do wrong?
Best video I’ve seen for this fix. Thank you!!🎉
Thanks, that is exactly what I needed to know .
Hey thank u for those video. I followed along and it worked. Only problem I got is after testing it out it worked 3 times in a row. On the 4rth try headlight failed, til I nudged the bulb then its on. We will see what happens next.
Thanks brother for the Demo 😊
Thank you so much for this video
My 2011 silverado low beam on both driver and passenger side keeps going off and on by its self. I replaced bulbs and single wire harness, but have the same problem. Any suggestions?
I changed the harness for the driver side the other day and I noticed the signal lights don't come on when low beams are on. They do signal though. But it seems they should be on when the low beam is on as well as that is what the passenger side shows.... 🤔
Great video. Thank u.
How about installing new bulbs when you install a new harness
What's the name of that cordless tool that was used in this video please ?
Can that harness fit the driver side as well ? Is it the same harness ?
Yea, it is
Does 2000-2005 have a harness like this?
U know I bought my wire harness from Amazon and it's made un China. Wires were very thin to fragile. Where are your wire harness made from ?
Good luck removing those grill clips!!!
This video is ridiculous. 😖