My shop build has dragged on a bit longer than planned and I will miss the 2021 Christmas boat. Here is to next year - I'll be getting those pla s for sure!
Absolutely perfect timing, and some great looking products, Andy - I just bought the bundle and hope to get started on them this coming week. I especially like the look of the cookie/milk tray, and the craft afternoon potential of the gnome. I think I'll make a few of the gnomes for my kids, and my nieces/nephews.
Bought my first CNC earlier this year, AVID CNC 5x10 Pro Series. No idea how to use it yet, just finished dialing it in tonight and got the spoilboard built / installed. Still need to get the dust collection right, but bought your Christmas bundle as my first start projects to start learning Vcarve. Liked the Santa Tray and Nut Cracker tray best, plan to make some for myself, friends, and family.
Just picked up your plans can’t wait to knock some of these out. I am new to the cnc so having the feed and speeds is super helpful. I am curious on how conservative they are compared to how you normally run your machine.
Hi Cody, that's great! The feeds and speeds are on the slower side. For my setup, I'd typically run them about 25% more aggressively. But every setup is different.
In regards to the Single line text fonts, do you mind sharing a good source for them? Ive found a couple but they have all been very square, mechanical, digital if you know what I mean.
@@AndyBirdBuilds thanks i have an onefinity but wasn't sure I was understanding the directions when I bought the design since I haven't done a tray before. But that is about the time it is saying
Is a CNC right for you? Watch this ua-cam.com/video/Ujt3h8TlMxE/v-deo.html
Good ideas. Thanks for sharing!
Glad you like them!
Very nice Christmas ideas 💡..
My shop build has dragged on a bit longer than planned and I will miss the 2021 Christmas boat. Here is to next year - I'll be getting those pla s for sure!
Thanks Any you're the best
Not sure about that. But you're welcome!
Absolutely perfect timing, and some great looking products, Andy - I just bought the bundle and hope to get started on them this coming week. I especially like the look of the cookie/milk tray, and the craft afternoon potential of the gnome. I think I'll make a few of the gnomes for my kids, and my nieces/nephews.
Perfect! Let me know if you have any questions on the files
Im hooked! Thanks for sharing!
No problem!
Great video Andy! Some very nice projects!
Thanks!
Great video. I never use single line text. Gonna have to experiment with it. Thank you!
Me either, but its a game changer for small text
Thanks for the inspiration man, keep it up!
No problem, will do!
Bought my first CNC earlier this year, AVID CNC 5x10 Pro Series. No idea how to use it yet, just finished dialing it in tonight and got the spoilboard built / installed. Still need to get the dust collection right, but bought your Christmas bundle as my first start projects to start learning Vcarve. Liked the Santa Tray and Nut Cracker tray best, plan to make some for myself, friends, and family.
Awesome! I'd love to see the final product
I really enjoy your videos. When I get a machine I will buy some plans and I think I am close.
Great to hear!
Just picked up your plans can’t wait to knock some of these out. I am new to the cnc so having the feed and speeds is super helpful. I am curious on how conservative they are compared to how you normally run your machine.
Hi Cody, that's great! The feeds and speeds are on the slower side. For my setup, I'd typically run them about 25% more aggressively. But every setup is different.
@@AndyBirdBuilds appreciate the feedback that’ll gives me a good grip on the range to use.
just bought your nut holder, cant wait
Cool!
In regards to the Single line text fonts, do you mind sharing a good source for them? Ive found a couple but they have all been very square, mechanical, digital if you know what I mean.
Check out singlelinefonts.com
Andy im looking for a larger cnc machine at least 4x4 what would you you recommend?
Whats your budget?
@@AndyBirdBuilds i was thinking about 4k to 7k
What food safe oil are you using. Looked good when dried.
I used Walrus Oil
Another great vid 👍 . How did you set up the bowl bit in your software , is it carbide create ?
Glad you liked it. I added it as a new tool in Carbide Create
Any vids on how to add bits to the database ? If not a future vid maybe . Thanks
New to Cnc. Do you use tabs to keep the parts from moving?
Sometimes - But I try to avoid them if I can
Thank you have a blessed day in the name of Jesus
Thank you. You too!
Where can you find single line fonts?
Try singlelinefonts.com
Thank you
Do you sell these 5 items? I don't see them all in your store on your website. Specifically the personalized ornament.
Currently, I don't sell the physical items just the digital files to make them yourself.
@@AndyBirdBuilds ahhh, OK thx!
How long did the nutcracker take to carve?
30 minutes or so
@@AndyBirdBuilds thanks i have an onefinity but wasn't sure I was understanding the directions when I bought the design since I haven't done a tray before. But that is about the time it is saying
The link to your files don't work. Maybe you can fix that?
Fixed!
Very nice Christmas ideas 💡..
Thanks! What did you think of the video?