So many people comment on self running mechanisms negatively, but here we have a working model. I would be so happy if this were my attempt. Well Done. As far as I know this is the only one of it's kind, an achievement is an understatement. And it has been put on youtube for all to see.
This achievement deserves to be in a prominent museum in a glass box with your name on a brass plate for all to see. You have done what many have tried to do throughout history but failed. If I was you I would feel extremely proud and fulfilled as an inventor. Well Done Sir!! To me this serves as a benchmark for all, and a basis of solid evidence that further such inventions can move forward and improve and be inspired from this.
Thanks for your beautyfull words. this makes my day!.. A few moths agoo I installed solarpanels on my roof. This is free energie ! My magnetic motor is nice as kind of art but has no practicall use . But the\anks for your positifve reaction.
@@perpetuummobile5068 Its not about free enegry right now (but it will be later), its about slight bypass of first law of thermodynamics with magnets that your motor does.
@@Raptorski753 Yes agree, its about perseverence, history proves that facts do change, many people in the past have been mocked by so called scholars of science, but persevered only to prove them wrong.
@@perpetuummobile5068 It is achievements like these, no matter how humble, that slowly edge the world towards a better place. Thank you for your inspiration.
@@perpetuummobile5068 It is very practical, in that it shows that a mechanism can be made to achieve near 100% efficiency. Yes it does deserve to be shown for all to see, in a glass box in a museum with your name on. Well done!!
I think this is the only video ive ever seen with a LEGIT working machine - even tho it doesnt actually accelerate or turn against load, im very happy to see someone not using camera tricks and foolery. I've been skeptical on every video, but this time, I think I actually believe this one.
@@custombikedesigns343 well i don’t see any motor inside, also he did put this perpetual motion machine on it’s side and i saw no battery or any wires hangind outside, so therefore this machine should be legit!!!
@@custombikedesigns343 prove it that it has been debunked because in his thirt video he shows that theres absolutely NO battery inside, no hidden fan, Check this out ua-cam.com/video/bNPNEgb1EEI/v-deo.html
Nice piece of work. Looks like something from the late 18th or early 19 the century, AND IT WORKS! Being that it appears to gain momentum and speeds up a bit, try connecting something to it. If it drives the mechanism or even a simple pulley or fan or something of that nature, you have free energy. Even if it's minimal, it would still be operating. Give it a try. Best regards.👍
It makes sense to me to have the stator magnet weak because the wheel acts as a flywheel, passing it easily through inertia but at the same time, got just enough push to reach the next attraction zone to continue movement. So yeah, it needs a good tuning before able to work. As an alternative I suggest using more space instead of weakening a magnet by heat.
Belle machine, très bien réalisée j'imagine que le choix des aimants n'a pas été fait au hasard Vous avez du avoir beaucoup de mal à régler l'ensemble. Bravo !
If this actually works, and you are willing to submit it for proper evaluation, a nobel prize would likely be yours, which means a nice sum of money and massive notoriety. All you have to do is allow it to be tested and inspected fully by independent third parties.
@@Graeme_Lastname "It woiks" is a throw back to Curly from the Three Stooges, and that puer-like (Nu Joyzie accent) enthusiasm of his... even if the thing is a hoax, he'd be right behind it. Nyuknyuknyuk! I'm not sure, either way. If the perpetual mobile device is for real, the inventor would probably be 6 feet under by now. There are vested interests in this world who will do anything to protect the status quo. i.e. the fossil fuel status quo. Do the names Stanley Meyer and Richard Clem ring any bells. Two brilliant guys who suddenly died just as their individual research programs were about to go into production. What an amazing coincidence... or is it??? P.S. Love the beard!
@@artofnoly9754 Awww, thanks m8. I had to dig deep to recall the 3 stooges but now you've reminded me I can recall that. I actually get it now. Thanks again m8.
I think the little magnet varies a few degrees maybe 20 ° .... that makes it able to attract and repel I suppose ... but if instead of that little magnet you place a small rotor of synchronized magnets so you would have 360 ° in rotation ... maybe it works calibrated by a conveyor belt or belt attached to the major axis ....
Now take This exact design and compact it with strong yet smaller magnets. Relay some of the energy coming from the wheel to make the smaller magnet spin faster in sequence with all of the repelling magnets making a timed full rotation. Needed for higher velocity and power production. Could actually be made extremely small and put in everyday devices. Your brilliant as I found this when I came to an extremely similar idea with same effect. The rotation of the stationary magnet is crucial though. Thank you as I believe together we have truly answered this dilemma
He used his hands to start it up,and it’s not a magnet motor, it’s atleast a pseudo perpetual motion machine, pseudo, because he used his hand and i don’t think that it would even run for hours because i believe that rotational magnett on the lever will get eventually get out of synch with those 4 giant magnets.
@@anibaldk well it doesn’t look like a magnet motor either,by the way, somebody did make a replica of it but it just stops after the first round,so i really don’t know how he did this,but there might be a hidden battery inside this thing, but i might be wrong, now if this thing works ,then we might could wire it up to a dynamo to power up a phone or something else.
im a fan of self running motor, your device has a logic,you can not produse energy but its a start.......i saw you my,may be we can help any its other...
The reality of this experiment is far more than 'Can it produce Free Energy' but can it utilize the elements we have in an optimal way. Can we use gravity with permanent magnetism and have it sustain movement in a repetitive cycle. This experiment says YES. When man invented the wheel it was most simple but where has it come? Never underestimate the power of simplicity. In a nutshell it shows that their is a potential difference between gravity and magnetism and it is a door that has been opened for whoever wants to go in, and in the light of where we are today it needs to be entered. Maybe one day this little unit will be behind glass in a museum, it deserves it, and a note on it will say, from it's humble beginning here it all started!!
The question is not weather you can enough useful energy but weather you have hidden source of energy that you don't show. If you are not cheating and your device rally run days and months and you must stop it even after that, than your device is an example of a violation of the law of conservation of energy. If that is true then for sure it is possible to make much stronger free energy device.
So either we accept that this machine violates energy conservation, or it's fake. What do you think is more probable? There is something hidden in the machine or near it.
Let's say that it trully works, I don't think that it violates any laws because the magnets would/will lose strenght over time - it means that this is in no way free energy, only a way to extract the energy from magnets (IF the machine really works that is). What do you think?
@@johneymute The camming of the magnet in and out or flipping around is key. The polarity has to change just like in an electric motor. i'll get back at it when a few other project are completed..........Cheers, Jim
@@johneymute I believe in talking kangaroos, just having a tiny bit of a problem finding one. Perhaps a belief in honest politicians or priests or cops, would be easier to justify. But I really think talking kangaroos have a better chance of being real. :)
I'm guessing this is a 180-degree case. I have seen similar principles, less complete, from my Principled Asymmetry. If the wheel is balanced carefully, for example as shown, there will be a semi-effecr on ether side, and a kick every 180 degrees. Many of the problems are presumed unavoidable but the principle is interesting (and addictive).
Nice job. Would you share the plans of your machine and the precautions and rules to take care of? Especially the movement of the lateral magnet during the rotational movement of the big magnets. Thanks for sharing.
Where are those that are running their mouth saying no free move body. Even the earth it self run without taking energy. Good bro you are doing great in this
Hace tiempo que ando investigando este tipo de móviles, me has dado una ideas que se pueden mejorar a tu móvil y ocupar la energía mecánica para un generador o para aumentar revoluciones, Gracias por exponer el principio en anteriores vídeos te lo agradezco nuevo sabes cuanto tiempo llevo buscando una máquina así, espero explicarlo y mejorarlo. Saludos México tenochtitlan more tanks you
I saw your "Why it seems impossible" comments. These sort of things are easily overcome by large scale, high-precision engineering. Think about the complexity of a modern car engine compared with the wooden creation you made. By no means do I want to "lower" your invention or creation to any lower standard then the truly great thing it is, I am rather trying to put it in the right context, shine the right light, and ultimately lift your "I believe this can be done" mood to a much higher level then where it is currently. If you compare such a car engine, CAD (Computer) designed, high-precision, made with specialist robots, etc. then it should be easy to see how any creation can be built using a similar method (requiring time, investment, etc.) and end up with a much more optimized solution. Surely such an engineered device can better a wooden creation, even if in and by itself such a wooden creation is perhaps the greatest thing in free energy yet... ?! Again, not trying to minimize your fantastic invention, rather trying to place it into the right context of where you are at and where this could go. Even if you did not create over-unity (yet) - but perhaps you did (is the speed of the wheel increasing slightly over time? Measure rounds per minute between point x and point y where point y is days or weeks later) - if you just created "full stable in equals out" then you have a perpetual machine, and that in itself would be SUPER. Don't give up too easily, but you likely want to get other people onboard (if you're entrepreneurial) or just sell this creation to someone who knows what they are doing, like the guy from the channel " MotionMagnetics " on UA-cam. You could also launch a project on one of the go-fund-me sites or similar. Or you could simply donate it to him (the guy from MotionMagnetics, whom I am not affiliated with btw, I just like his work), or to someone else you trust to take it serious, research it, develop it etc. You could also create a patent etc. The choice is truly yours!
I just watched your other video (ua-cam.com/video/_sX_8WT1Ztw/v-deo.html) and it seems the wheel is going faster (swap from 1 minute to near the end of the video)... If so, then there would seem to be over unity. In any case, read my comments above, and WELL DONE
@@RoelVandePaar Hi Roel .You have a beautyfull very Dutch name . I am Dutch so I can know this. I never noticed this specific acceleration. The speed of the wheel is the result of the balance between the force of the magnets on one side and the friction of the bearing, the flipping mechanism of the small magnet on the other side. Both can vary whith the time ans that causes the variations of speed . Thanks for your reactions
I have to take my hat off to you Sir for working on this till you figured it out. Would love to make one of this machine. Maybe plans somehow ??? Thanks
Hermoso es la unica palabra que se me ocurre es un hermoso montaje parace victoriano pero es moderno definitivamente es una maquina bien balanceada Felicidades por el triunfo
Great job! But your conclusions within your limitations. Within optimized better efficiency and better appropriate ratios getting more speed and torques seem possible.
Am afraid he’s just a big giant liar and just used that camera off trick to spung that wheel, am mean why the fuck is he spunging at 00.40 with his bar hand? Then it’s not a self running magnet motor because he used his hand, a self running magnet motor should start on it’s own once those magnets are in place, sothat once you pull off 1 magnet out of place, it should slowly stop.
Good job. This shows that with perseverance , patients . and experience you can achieve anything . Well done . you should make drawings for others to replicate it.
Good afternoon, could you please tell me how thick the wire was that you used in the movement mechanism of the small magnet? and what material is it made of? I realized that he is very thin. but rigid.
It will move much better WITHOUT magnets. Magnets cause additional energy loss. The best construction for these type of "motors" - just a disc on the axis, without additional magnets or another mechanisms. This construction in video have an electric motor on the axis and a battery that is hidden somewhere. The second law of thermodynamics says that there are no perpetual motion machines. Magnets will only worsen the system.
Another idea would be to install another mechanism equal to the one it has ... but in the opposite direction ... so you would have more speed I suppose ... more stators the better ...
Maybe adding neodymium magnets because those magnets are supposed to last forever, and it’s off course recommanded to put it in a cold place, Now if we could create several of these machines ,wire them up together to an transformer (wich could convert that 12 volt to 120 volt) , this way we can get infinitive free energy 😊😊 But ,you better watch out those oil companies getting after you,haha.
Seems to be pretty unlikely. Mechanical things tend to have friction. Which is difficult to overcome, without some sort of energy input. Many point to the waterwheel that is run by gravity, if you stand back a bit. But if you stand back even further, one might become aware that the water that flows downhill, got to the point of being uphill through evaporation via the Sun. From the onscreen written comments, it is disclosed that one might make the smaller magnet 'weaker' or 'stronger,' which begs the question of how that might be done? Perhaps through a coil and a battery. With the little setup about half of the way up on the side of the wheel? Regardless, the apparent prop is beautify made.
You got the magnet repelling up against gravity , have it repelling down , and to cancel a magnetic field you must use a small piece of iron in-between the space where attraction is the greatest and you can eliminate that cam action clicking , there are no moving parts except for the wheel itself , And use ceramic bearings , they have less friction and steel
Thanks Jim Thomas that is a good idee. I tried to use the big magnet to flip the small magnet. unfortunately the timing was the problem. The flip must come in time, that is not a problem ,but thr littlr magnet must alsoo flip back in time !
Vind het fantastisch wat je gecreeerd hebt. Heb je ook inspiratie van anderen gehad hiervoor? Ik ge proberen mijn "eigen" versie hiervan te bouwen. Heb je nog tip's voor me? Groetjes M
Boa tarde, por favor você poderia me dizer qual é a grossura do arame que você usou no mecanismo da movimentação do pequeno imã? e de que material ele é fabricado? percebi que ele é bem fino. mas rígido.
Put for each magnet on the wheel as much a mobile magnet as the one in the video and, theoretically, the power generated should increase proportionally ... or put twelve magnets on the wheel each with the magnet or control mobile ...!
From that demo it's already over unity simply because I can hear it, air and bearing friction etc. And, it continues to rotate. Nicely built contraption but it's claiming over unity. So, how come you're not a multi billionaire? Where are the batteries hidden?
Overunity systems do exist. He's not multi billionaire because of skepticks like you. Try building same system at home & see it for yourself. Here's the concept ua-cam.com/video/TwTPwIcSDpg/v-deo.html Also feel free to checkout forums at overunity.com/
You may do like my command but i still don’t have an ansure about my question wich i do need to have, so can you confirm me that there is NO battery inside this unit????
@@durrer9038 yes i wonder ,but guess what it turns out am not the only who asked about a possible battery inside ,BUT did you know ? He released a now video in wich he removed that ticking component to confirm that there is no battery inside, m.ua-cam.com/video/bNPNEgb1EEI/v-deo.html But i still do wonder if he is not hiding any secret inside that wooden plate,mmmm
Siempre tiene que tener una base bastante gruesa de madera ! ( Se puede esconder en esa base cualquer cosa ) porque no le pone la base transparente ? para quitar cualquier sospecha !
I see what you did there, those 2 inspection holes? Are they for switches and miniature battery change/charge? I've never found a leverageable asymmetry in the magnetic field.
Very interesting reaction. Please can you point out where you see those inspectionholes. There are no inspection holes but I like to know what you see as inspectionholes Thanks for your your reply
@@perpetuummobile5068 I love your work and craftsmanship, btw. But wild perpetual motion claims are fun, as long as they are just for entertainment purposes. The construction shown at 1:22 shows two square holes on top of the proposed propulsion magnet assembly (stator?). As a maker myself, those square holes were not strictly needed as a drilled hole on the side with a brass tube alone is sufficient for a pivot on the "set" (or is it "reset") wire activated by the passing rotor magnet. What hidden mechanisms are accessible from those holes? I have a gas station toy solar model of flowers waving back and forth that uses a similar technique to trigger a hidden coil in the base. A finely balanced wheel with precision low friction bearing could conceivably run for months this way on a small button battery hidden amongst layers of plywood. As I said, I love your work, including this one, keep it up.
Hello Oldskool driver. I now understand what you mean and I am sorry that I made those holes . Nor were they necessary. They were created because the up and down rotating shaft in the brass tube had to be axially secured. The ash came out every time. I was able to secure the shaft through the hole. It only became 2 holes because the first attempt failed. When I built this construction I didn't know it would be so successful on youtube. I now regret not applying an invisible solution. Thank you for your attention. There is no point in recovering afterwards because the film is already on the internet.
s I explain in the video, I let the magnet turn 90 degrees when the large magnet passes. I started building with this idea and to my surprise it also worked (after many adjustments). No free energy but just enough to keep moving. I showed the device to some people who had studied physics. They say that it is not possible due to some natural laws and that the device will stop after some time. But the device was still running when they left. That was after 2 pm. After that I stopped the wheel myself because after some time I became crazy about the ticking and because I want to keep it whole for later demonstrations. Everything wears out and nothing lasts forever Feedback sturen Geschiedenis Opgeslagen Community
Sorry I did this with google translate and that is not good As I explain in the video, I let the magnet turn 90 degrees when the large magnet passes. I started building with this idea and to my surprise it also worked (after many adjustments). No free energy but just enough to keep moving. I showed the device to some people who had studied physics. They say that it is not possible due to some physic laws and that the device will stop after some time. But the device was still running when they left. That was after 2 hour. After that I stopped the wheel myself because after some time I became crazy about the ticking and because I want to keep it whole for later demonstrations. Everything wears out and nothing lasts forever
@@perpetuummobile5068 if there is no motor in the hub then that is pertpetual motion and there a 5 million dollar prize, also the wheel self starts with no push.
@@stevenbishop8625 yep,no hidden batterys or wired cable sticking out of it, so it’s completely perpetual, now to avoid the fricktion ccaused by heat, we should keep this machine on a cold place, So let’s say we will put a dynamo into this machine sothat it can generate 12 volt, now in case it could only generate 1 volt,well then we can make 12 of these machines and wire them up together to produce 12 volt,then that 12 volt can be feeded to an transformer to generate 120 volt, sothat you could power your water cooker, a stove, a microwave or a frigurator etc,,, Or how about charging peoples car for digital payment sothat you can get just rich while keep sleepinh, heeey heeey😊
@@perpetuummobile5068 acho que funciona e no e falso para mim por mias experiência com imá , eu acho que tenho todos os materiais para replicarlo se u senhor permitir , lá pergunta e que medidas tem os imá da roda e que diâmetro tem só a roda de madeira , eu no vi todos os seus vídeos mas por falta de tempo kkkkk acho muito interessante esse projeto obrigado
This is an overbalanced gravity wheel using magnets to create the overbalance effect. The wheel is divided into two halves. The half with the small magnet makes the large magnets on that side of the wheel "lighter" than the magnets on the opposite side. So the other half of the wheel is "heavier" and gravity pulls that side of the wheel down. A second mechanism placed exactly opposite the first one, but with the small magnet flipped, would make that side of the wheel even "heavier", thus increasing the effect. You are on the right track. If you made one of these machines as tall as a windmill, you would be able to generate useable electricity from it. I challenge you to make a bigger wheel that will turn a tiny generator that will light a single LED. This will prove that you can generate electricity from this system. And here is a tip to make it even more powerful: make the rim of the wheel as heavy as possible. This will turn it into a flywheel and give you more power to turn an electric generator.
Geweldig om te zien. Dit soort vindingen maken mij erg blij. Op de middelbare school heb ik ooit een idee laten zien van een magneet aangedreven motor die qua werking lijkt op deze. Echter mijn leraar wees mij op 'de wet van het behoud van energie'. Dit heeft mij gestopt om het wiel ooit te gaan bouwen. Het is mij dan ook een groot raadsel hoe dit wel werkt. Zit er dan toch meer achter de werking van permanente magneten? Zeg me alsjeblieft niet dat er een motortje in zit, anders zou ik zeggen: Zeer knap gedaan! Het inspireert mij in ieder geval om meer open-minded te kijken naar dit soort filmpjes en wellicht weer eens wat te experimenteren. (En met filmpjes bedoel ik niet de CD en hot-glue filmpjes, daar prik ik wel doorheen) p.s. ik zou graag een keer komen kijken, als dat mogelijk is
Hallo Wim. Leuk om een reactie in het nederlands te krijgen .(ik vraag me af hoe weet dat ik nederlands ben) Het is waar dat mijn machientje volgens Natuurkunde wetten niet kan maar het is toch nog gelukt het te laten bewegen. Ik woon in Drachten als dat niet te ver is kunt u langskomen . Zet uw e mail adres in een reactie dan kunnen we verder communiceren. groet Sam PS ik ga nu een week op vakantie.
@@perpetuummobile5068 Hallo Sam, een aantal reacties hiervoor zag ik uw reactie in het Nederlands. Ik woon in de buurt dus ik kan langskomen wanneer het u uitkomt. Mijn email adres is willempie86@ziggo.nl Groet, Wim
Hi Luis, Smart idee but.... If I mound more magnets on the wheel the small magnet has no time to fall back and the result is negative . I tried this allready I think that the reason is that the magnetfield are no longer seperated and that gives disturbence
I was just watching a video about magnets and had a very similar revelation, surely this could be used to generate energy. As far as I'm aware, the magnetic force will never become less efficient, and the metals will not fade either. Why has nobody done this on a much larger scale as a viable, free and theoretically unlimited energy supply?. I know resistance needed to generate the energy would be an issue, but on a massive scale it shouldn't be much of an issue. Even suspending the wheel using more magnets at the centre will mean no resistance or wearing of bearings. It's crazy but it must be a viable option.
Hi Micke The items you see on the spokes are weights that I can slide over the spoke and can fasten with a scew. the function of these spokeweights are to balance the wheel.
U want to have a wheel to move then do this manually is the idea? I know how to make engine using magnet and electricity only, this machine can create electricity to power the engine(my own creation), its never seen before and true do you believe?
It is very simple, magnets propulse wheel and their magnetic field is not weakened in the process as it is recharging from earths magnetic field. As long as earth is rotating this device will work. That is the secret of "free energy", it is not free, not against physics laws. The battery in this case is earth itselt.
This is a very good explanation of why my machine works. I had never heard of this theory. My family and acquaintances tell me; This cannot work because of physics laws. I can hardly deny these laws, which is why your statement is very valuable
@@perpetuummobile5068 Well done! my added explanation is that the magnets have 'latent' energy, they took time and energy to make and as such are a very good storage, all that is needed is to coax out that latent energy with some good old fashioned ingenuity and clear and methodical thinking. I agree no so called laws are broken but just using existing forces. What you have done is monumental actually because it can show that this in fact CAN be done and once it is done and made then it can be improved over time. If it were me that had achieved this I would be elated and satisfied. So again well done especially for your open source honesty. I find your conclusion actually too modest. Imagine ten of these each weighing 1 ton, how much energy would that produce? Thank you for uploading
@@johnlannikk2701 That question is easily answered. Given the proposed dimensions, weights etc. there is an exact result that can reasonably easily be calculated. It's quite a simple, but often overlooked calculation and is trivially easy to calculate, when you know how. I'll avoid all the details, they are easy to look up, try google. But the result is, unusually for this sort of system, exact for any of the variables. The result is, exactly, precisely, unquestionably, zero.
How do you cut ceramic magnets straight without fracture? What was magnetic strength reading of final small magnet? The 90 degree flip of magnet does not change poles,- needs 180 degrees change. Coils mounted exterior to magnets do not impede RPM. Can make night lights with white leds. You can also shield pole with tin sheet then rotate out of position using same turning mechanism. Magnet-steel ball-sheet-magnet, then ball shifts.(The Ecklin Patent with horse shoe magnet + output take off power from reciprocating weight on double springs.)
Ceramic magnets are very difficult to saw or cut . Perhaps grinding is possible. But there was no need for that . The smaal magnet comes from a small brushles motor .90 degree turning is just enough as you see,
This magnetic motor is usually stationary. I start it up for a demonstration and stop it when the visit is gone. The longest running time was 2 hours. The reason for this is the annoying ticking sound and; I want to keep it whole for the next demonstration
@@perpetuummobile5068 so basically you stopped it because of getting annoyed by that stticking sound ,right, If friction will stop it ,i suggest put liquid cooling get into it and/or put it on a very very cold place.
Yep, while scientists says that such perpetual motion machine is impossible and so therefore don’t exist, with the reason that because of the thermodynamic rule of mother nature,that you cannot get energy out of nothing, you have to put energy in before getting energy out , However ,this amezing perpetual motion breaks this law , you don’t have to feed it with energy , it just will run out of itself indefinitly unless heat & friction will stop it, but even that can be eliminated but put it into a very cold place and/or put liquid cool gel into it😊👍.
The wheel doesn't run forever. The one I made in 2004 started, speed up, and maintained motion for a while but the magnets eventually ware out, so the energy used to make the magnets is less than the energy gleaned from these magnets by this device. The magnets are sort of a battery, but gauss is lost as the friction between the magnetic forces thats created when the opposite forces come into contact with eachother...
@@LegoStopMotionAnimationMovies I'm busy with other projects now, that was my first invention. It helped me to learn about the mrchanical abilities and limits of magnets. Building these is a waste of time. Solar power and gravity batteries, super capacitors, solid state electrolyte for electrolysis, etc are my new hobby now.
THANK YOU TO EXPLAIN AND SHARE VIDEO YOUR ENOVATION ,VERY APPRECIATE . YOUR GOOD PERSON . P.S. : MAYBE YOU CAN TRY AND MORE MAGNETS AROUND FOR SPEED ..??
So many people comment on self running mechanisms negatively, but here we have a working model. I would be so happy if this were my attempt. Well Done. As far as I know this is the only one of it's kind, an achievement is an understatement. And it has been put on youtube for all to see.
I'm loving the sound it's making, the more I listen to it. It's quite soothing. Nice job, man.
Listen to marble machine x ! That’s a nice sound. Or the original one. That one sounds like this. But better.
Truth makes you sleepy, I'm coming to this video because a Brazilian inventor managed to make a similar one 👍
This achievement deserves to be in a prominent museum in a glass box with your name on a brass plate for all to see. You have done what many have tried to do throughout history but failed. If I was you I would feel extremely proud and fulfilled as an inventor. Well Done Sir!! To me this serves as a benchmark for all, and a basis of solid evidence that further such inventions can move forward and improve and be inspired from this.
Thanks for your beautyfull words. this makes my day!.. A few moths agoo I installed solarpanels on my roof.
This is free energie ! My magnetic motor is nice as kind of art but has no practicall use . But the\anks for your positifve reaction.
@@perpetuummobile5068 Its not about free enegry right now (but it will be later), its about slight bypass of first law of thermodynamics with magnets that your motor does.
@@Raptorski753 Yes agree, its about perseverence, history proves that facts do change, many people in the past have been mocked by so called scholars of science, but persevered only to prove them wrong.
@@perpetuummobile5068 It is achievements like these, no matter how humble, that slowly edge the world towards a better place. Thank you for your inspiration.
@@perpetuummobile5068 It is very practical, in that it shows that a mechanism can be made to achieve near 100% efficiency. Yes it does deserve to be shown for all to see, in a glass box in a museum with your name on. Well done!!
Still running after one year ! Fantastic. Will check back in one year !
I think this is the only video ive ever seen with a LEGIT working machine - even tho it doesnt actually accelerate or turn against load, im very happy to see someone not using camera tricks and foolery. I've been skeptical on every video, but this time, I think I actually believe this one.
Not legit. It's already been debunked long ago. There is a low voltage motor inside the wheels hub
@@custombikedesigns343 well i don’t see any motor inside, also he did put this perpetual motion machine on it’s side and i saw no battery or any wires hangind outside, so therefore this machine should be legit!!!
@@custombikedesigns343 prove it that it has been debunked because in his thirt video he shows that theres absolutely NO battery inside, no hidden fan,
Check this out
ua-cam.com/video/bNPNEgb1EEI/v-deo.html
@@johneygd I can't see Paris so it doesn't exist?
Nice piece of work. Looks like something from the late 18th or early 19 the century, AND IT WORKS!
Being that it appears to gain momentum and speeds up a bit, try connecting something to it. If it drives the mechanism or even a simple pulley or fan or something of that nature, you have free energy. Even if it's minimal, it would still be operating. Give it a try.
Best regards.👍
Awesome achievement! Nobody can recognize where hidden battery is! Congratulations! 🎈🎉🍾
I reckon it's in the block of wood in the middle.
Thats because there is no battery.
It makes sense to me to have the stator magnet weak because the wheel acts as a flywheel, passing it easily through inertia but at the same time, got just enough push to reach the next attraction zone to continue movement. So yeah, it needs a good tuning before able to work. As an alternative I suggest using more space instead of weakening a magnet by heat.
Belle machine, très bien réalisée j'imagine que le choix des aimants n'a pas été fait au hasard Vous avez du avoir beaucoup de mal à régler l'ensemble.
Bravo !
If this actually works, and you are willing to submit it for proper evaluation, a nobel prize would likely be yours, which means a nice sum of money and massive notoriety. All you have to do is allow it to be tested and inspected fully by independent third parties.
Credo che da qualche parte troverebbero una batteria nascosta .
@@andreapastorelli5491 definitely
😀😀😁😁😁never happens, troy reed already done it but he died out of nowhere
@@abbaspourmoghadam3850 who is troy
Troy reed American investor
Congrats!! You've made the grade. It WOIKS!!
It appears to work. That's quite different to "It works".
@@Graeme_Lastname Fact is stranger than fiction.
P.S. "It WOIKS" does not mean "It works".
@@artofnoly9754 Sorry mate, wrong country here. You're gunna 'ave to explain that to me. :)
@@Graeme_Lastname "It woiks" is a throw back to Curly from the Three Stooges, and that puer-like (Nu Joyzie accent) enthusiasm of his... even if the thing is a hoax, he'd be right behind it. Nyuknyuknyuk!
I'm not sure, either way. If the perpetual mobile device is for real, the inventor would probably be 6 feet under by now. There are vested interests in this world who will do anything to protect the status quo. i.e. the fossil fuel status quo. Do the names Stanley Meyer and Richard Clem ring any bells. Two brilliant guys who suddenly died just as their individual research programs were about to go into production. What an amazing coincidence... or is it???
P.S. Love the beard!
@@artofnoly9754 Awww, thanks m8. I had to dig deep to recall the 3 stooges but now you've reminded me I can recall that. I actually get it now. Thanks again m8.
I think the little magnet varies a few degrees maybe 20 ° .... that makes it able to attract and repel I suppose ... but if instead of that little magnet you place a small rotor of synchronized magnets so you would have 360 ° in rotation ... maybe it works calibrated by a conveyor belt or belt attached to the major axis ....
Now take This exact design and compact it with strong yet smaller magnets. Relay some of the energy coming from the wheel to make the smaller magnet spin faster in sequence with all of the repelling magnets making a timed full rotation. Needed for higher velocity and power production. Could actually be made extremely small and put in everyday devices. Your brilliant as I found this when I came to an extremely similar idea with same effect. The rotation of the stationary magnet is crucial though. Thank you as I believe together we have truly answered this dilemma
Clever design and no clickbait title. Well done, Sir/Madam
He used his hands to start it up,and it’s not a magnet motor, it’s atleast a pseudo perpetual motion machine, pseudo, because he used his hand and i don’t think that it would even run for hours because i believe that rotational magnett on the lever will get eventually get out of synch with those 4 giant magnets.
@@johneygd It never said perpetual machine. He claims the wheel spins for a considerable amount of time and I do believe it to be a clever design.
@@anibaldk well it doesn’t look like a magnet motor either,by the way, somebody did make a replica of it but it just stops after the first round,so i really don’t know how he did this,but there might be a hidden battery inside this thing, but i might be wrong, now if this thing works ,then we might could wire it up to a dynamo to power up a phone or something else.
hello, could you make another video showing the propulsion magnet more closely. Is this engine really?
im a fan of self running motor, your device has a logic,you can not produse energy but its a start.......i saw you my,may be we can help any its other...
Yes, more big magnets and more little ones, will increase de speed and torque, nice job buddy, this is another cool idea.
I like this machine. You are right that it is not free energy, but somehow this combination of wood, brass, and rythmic noise was weirdly captivating.
Quite nice!! I think your conclusion is on the mark.
you can better buy a solarpanel for free energy
The reality of this experiment is far more than 'Can it produce Free Energy' but can it utilize the elements we have in an optimal way. Can we use gravity with permanent magnetism and have it sustain movement in a repetitive cycle. This experiment says YES. When man invented the wheel it was most simple but where has it come? Never underestimate the power of simplicity. In a nutshell it shows that their is a potential difference between gravity and magnetism and it is a door that has been opened for whoever wants to go in, and in the light of where we are today it needs to be entered. Maybe one day this little unit will be behind glass in a museum, it deserves it, and a note on it will say, from it's humble beginning here it all started!!
The question is not weather you can enough useful energy but weather you have hidden source of energy that you don't show. If you are not cheating and your device rally run days and months and you must stop it even after that, than your device is an example of a violation of the law of conservation of energy. If that is true then for sure it is possible to make much
stronger free energy device.
So either we accept that this machine violates energy conservation, or it's fake. What do you think is more probable? There is something hidden in the machine or near it.
@@sulphuric99 It's fake!
Let's say that it trully works, I don't think that it violates any laws because the magnets would/will lose strenght over time - it means that this is in no way free energy, only a way to extract the energy from magnets (IF the machine really works that is). What do you think?
rexresearch keelynet
super work.open mind. felecitacions
Very nice! Thanks for sharing!
That is so cool. I'm working on a different style and cannot get it to keep running yet.
I hope you will succeed to get it work and show it us on YT,,,i cannot wait.
And you never will but it's fun to play with. :)
Keep kn working and never give up, wheres a will, theres a way, i believe in perpetual motion machines.
@@johneymute The camming of the magnet in and out or flipping around is key. The polarity has to change just like in an electric motor. i'll get back at it when a few other project are completed..........Cheers, Jim
@@johneymute I believe in talking kangaroos, just having a tiny bit of a problem finding one. Perhaps a belief in honest politicians or priests or cops, would be easier to justify. But I really think talking kangaroos have a better chance of being real. :)
Avery smart idea.... And a very clever realization....
Congrats' !
:-)
From Brussels, with Love...
Muy bueno. Excelente. Saludos cordiales desde Venezuela.
I'm guessing this is a 180-degree case. I have seen similar principles, less complete, from my Principled Asymmetry. If the wheel is balanced carefully, for example as shown, there will be a semi-effecr on ether side, and a kick every 180 degrees. Many of the problems are presumed unavoidable but the principle is interesting (and addictive).
Nice job. Would you share the plans of your machine and the precautions and rules to take care of?
Especially the movement of the lateral magnet during the rotational movement of the big magnets.
Thanks for sharing.
Nice clean build
@ 2:10 you can see the rotor magnet interact with the electromagnet coil driver hidden under the top thin plywood sheeting of the base.
Yes
I can't see it, but, it has to be something. I don't believe in magic. ;)
Where are those that are running their mouth saying no free move body. Even the earth it self run without taking energy. Good bro you are doing great in this
Check out the laws of thermodynamics lol
@@VijitChandna LOL Like that's gunna happen. ;)
Congratulations on an extraordinary achievement.
Can you share with me the completed diagram to make this? I want to try by my own
Veramente interessante e grazie per averlo condiviso. Grazie
Ma secondo te è vero sto coso? Non dovrebbe girare all’infinito..
Well done!
Awesome what if you doubled the number of magnets ? Cam seems to kick back quick enough
This design reminds me of another motor that was made back in the 40's or 50's with the same concept and it worked, great job!
And it worked. Eternal free energy, and they forgot how to do it? Lost the design? Kept it secret to help the oil companies? Errrr ?????
Howard Johnson?
What are the pole of each big magent and the small magnet
If you don't get the patent, could you show us how to build this at home? I'd love having a Perpetuum mobile on my desk!
Well if they could sell kits like these whether online or in stores, i definitely would buy one.
Hace tiempo que ando investigando este tipo de móviles, me has dado una ideas que se pueden mejorar a tu móvil y ocupar la energía mecánica para un generador o para aumentar revoluciones, Gracias por exponer el principio en anteriores vídeos te lo agradezco nuevo sabes cuanto tiempo llevo buscando una máquina así, espero explicarlo y mejorarlo. Saludos México tenochtitlan more tanks you
Buen comentario, compatriota hispano
Woooow ! REVOLUTIONARY ! 👏👏👏👏 Great work !
Parabéns ótimo trabalho 👏👍👈 sucesso aí família 🤝
Mooi werk!
Will the magnets wear out? It would be interesting to see how long it would run before entropy kicks in
Yes after 200 years
Have you tried to put on other magnetic escapement on the other side so you can generate more moment
it looked like a single cylinder engine. speed can increase with the pushing force at different times.
I saw your "Why it seems impossible" comments. These sort of things are easily overcome by large scale, high-precision engineering. Think about the complexity of a modern car engine compared with the wooden creation you made. By no means do I want to "lower" your invention or creation to any lower standard then the truly great thing it is, I am rather trying to put it in the right context, shine the right light, and ultimately lift your "I believe this can be done" mood to a much higher level then where it is currently.
If you compare such a car engine, CAD (Computer) designed, high-precision, made with specialist robots, etc. then it should be easy to see how any creation can be built using a similar method (requiring time, investment, etc.) and end up with a much more optimized solution. Surely such an engineered device can better a wooden creation, even if in and by itself such a wooden creation is perhaps the greatest thing in free energy yet... ?! Again, not trying to minimize your fantastic invention, rather trying to place it into the right context of where you are at and where this could go.
Even if you did not create over-unity (yet) - but perhaps you did (is the speed of the wheel increasing slightly over time? Measure rounds per minute between point x and point y where point y is days or weeks later) - if you just created "full stable in equals out" then you have a perpetual machine, and that in itself would be SUPER. Don't give up too easily, but you likely want to get other people onboard (if you're entrepreneurial) or just sell this creation to someone who knows what they are doing, like the guy from the channel " MotionMagnetics " on UA-cam. You could also launch a project on one of the go-fund-me sites or similar. Or you could simply donate it to him (the guy from MotionMagnetics, whom I am not affiliated with btw, I just like his work), or to someone else you trust to take it serious, research it, develop it etc. You could also create a patent etc. The choice is truly yours!
I just watched your other video (ua-cam.com/video/_sX_8WT1Ztw/v-deo.html) and it seems the wheel is going faster (swap from 1 minute to near the end of the video)... If so, then there would seem to be over unity. In any case, read my comments above, and WELL DONE
@@RoelVandePaar Hi Roel .You have a beautyfull very Dutch name . I am Dutch so I can know this.
I never noticed this specific acceleration. The speed of the wheel is the result of the balance between the force of the magnets on one side and the friction of the bearing, the flipping mechanism of the small magnet on the other side. Both can vary whith the time ans that causes the variations of speed . Thanks for your reactions
@@perpetuummobile5068 Thank you for the reply! The acceleration makes me think it may be over-unity.
Bearing friction, air friction and quite a few others. Even the noise. It's already claimed as over-unity.
I have to take my hat off to you Sir for working on this till you figured it out. Would love to make one of this machine. Maybe plans somehow ??? Thanks
Oh please, think.
Look forward to see more great thing from you Sir. Thanks
Great! Much like the motor built by Friedrich Lüling in 1962. Old film stock still exists.
Yes, very much alike. Don't work!
prachtig... thank you.
Hermoso es la unica palabra que se me ocurre es un hermoso montaje parace victoriano pero es moderno definitivamente es una maquina bien balanceada Felicidades por el triunfo
Great job! But your conclusions within your limitations. Within optimized better efficiency and better appropriate ratios getting more speed and torques seem possible.
Congrats!!!
Am afraid he’s just a big giant liar and just used that camera off trick to spung that wheel, am mean why the fuck is he spunging at 00.40 with his bar hand? Then it’s not a self running magnet motor because he used his hand, a self running magnet motor should start on it’s own once those magnets are in place, sothat once you pull off 1 magnet out of place, it should slowly stop.
Can a perpetual clock be made using a similar mechanism?
Good job. This shows that with perseverance , patients . and experience you can achieve anything . Well done . you should make drawings for others to replicate it.
felicitacion por el motor.
It may depends on the size / lenght / way , when it doesnt work with other magnets.
I know energy cannot be created but if you could harvest energy from the sound it makes... what do you call that? Alternative energy?
Caraca..c conseguiu ein 👏👏👏👏👏👏
Good afternoon, could you please tell me how thick the wire was that you used in the movement mechanism of the small magnet? and what material is it made of? I realized that he is very thin. but rigid.
hi antonio it is .5 mm steel wire ,I needed a stif and light materal. Btass or copper was no option
But is it normal steel? ferrous? or stainless steel that is not magnetic?
@@antonioijano8060 It is ferro steel but it is thin and the magnetic force is aparently acceptable
@@perpetuummobile5068 ok, thanks for the sincerity, i'm working on my replica and as soon as it's working i'll show you. Gratitude of heart!
It will move much better WITHOUT magnets. Magnets cause additional energy loss. The best construction for these type of "motors" - just a disc on the axis, without additional magnets or another mechanisms. This construction in video have an electric motor on the axis and a battery that is hidden somewhere. The second law of thermodynamics says that there are no perpetual motion machines. Magnets will only worsen the system.
Without the flipping small magnet the motor will not turn see ua-cam.com/video/bNPNEgb1EEI/v-deo.html
Another idea would be to install another mechanism equal to the one it has ... but in the opposite direction ... so you would have more speed I suppose ... more stators the better ...
Two will work exactly twice as well as one. 1 X 2 = 2, 2 X 0 = 0. Twice as well. ;)
Maybe adding neodymium magnets because those magnets are supposed to last forever, and it’s off course recommanded to put it in a cold place,
Now if we could create several of these machines ,wire them up together to an transformer (wich could convert that 12 volt to 120 volt) , this way we can get infinitive free energy 😊😊
But ,you better watch out those oil companies getting after you,haha.
Батарейка спрятана. В подложке вытачен паз или в держателе самого толкателя.)
Seems to be pretty unlikely. Mechanical things tend to have friction. Which is difficult to overcome, without some sort of energy input. Many point to the waterwheel that is run by gravity, if you stand back a bit. But if you stand back even further, one might become aware that the water that flows downhill, got to the point of being uphill through evaporation via the Sun. From the onscreen written comments, it is disclosed that one might make the smaller magnet 'weaker' or 'stronger,' which begs the question of how that might be done? Perhaps through a coil and a battery. With the little setup about half of the way up on the side of the wheel? Regardless, the apparent prop is beautify made.
It works, get over it.
You got the magnet repelling up against gravity , have it repelling down , and to cancel a magnetic field you must use a small piece of iron in-between the space where attraction is the greatest and you can eliminate that cam action clicking , there are no moving parts except for the wheel itself ,
And use ceramic bearings , they have less friction and steel
Thanks Jim Thomas that is a good idee. I tried to use the big magnet to flip the small magnet. unfortunately the timing was
the problem. The flip must come in time, that is not a problem ,but thr littlr magnet must alsoo flip back in time !
Muchas graciassss
Vind het fantastisch wat je gecreeerd hebt. Heb je ook inspiratie van anderen gehad hiervoor? Ik ge proberen mijn "eigen" versie hiervan te bouwen. Heb je nog tip's voor me? Groetjes M
I like it. 👍
Boa tarde, por favor você poderia me dizer qual é a grossura do arame que você usou no mecanismo da movimentação do pequeno imã? e de que material ele é fabricado? percebi que ele é bem fino. mas rígido.
Antonio Benigno Ijano Loppes copper wire normal 1mm
Put for each magnet on the wheel as much a mobile magnet as the one in the video and, theoretically, the power generated should increase proportionally ... or put twelve magnets on the wheel each with the magnet or control mobile ...!
No... This is another fake video.
From that demo it's already over unity simply because I can hear it, air and bearing friction etc. And, it continues to rotate. Nicely built contraption but it's claiming over unity. So, how come you're not a multi billionaire? Where are the batteries hidden?
see this!!! ua-cam.com/video/MA0JilG2zCo/v-deo.html
@@perpetuummobile5068 Video unavailable
This video has been removed by the uploader
Overunity systems do exist. He's not multi billionaire because of skepticks like you. Try building same system at home & see it for yourself. Here's the concept ua-cam.com/video/TwTPwIcSDpg/v-deo.html
Also feel free to checkout forums at overunity.com/
We need THE RECTIFIER!
Hi, can you please confirm me that there is absokutely no battery in this magnet motor machine???
If so i may consider building one,
Thanks alot.
You may do like my command but i still don’t have an ansure about my question wich i do need to have, so can you confirm me that there is NO battery inside this unit????
Why still no confirmation..?
@@durrer9038 yes i wonder ,but guess what it turns out am not the only who asked about a possible battery inside ,BUT did you know ? He released a now video in wich he removed that ticking component to confirm that there is no battery inside,
m.ua-cam.com/video/bNPNEgb1EEI/v-deo.html
But i still do wonder if he is not hiding any secret inside that wooden plate,mmmm
Whether there is a battery or not, it will eventually stop, later in the former case, sooner in the latter.
Very good
Siempre tiene que tener una base bastante gruesa de madera ! ( Se puede esconder en esa base cualquer cosa ) porque no le pone la base transparente ? para quitar cualquier sospecha !
how long does it lasts?
+++++++++++ very nice .
I see what you did there, those 2 inspection holes? Are they for switches and miniature battery change/charge? I've never found a leverageable asymmetry in the magnetic field.
Very interesting reaction. Please can you point out where you see those inspectionholes. There are no inspection holes but I like to know what you see as inspectionholes Thanks for your your reply
@@perpetuummobile5068 I love your work and craftsmanship, btw. But wild perpetual motion claims are fun, as long as they are just for entertainment purposes. The construction shown at 1:22 shows two square holes on top of the proposed propulsion magnet assembly (stator?). As a maker myself, those square holes were not strictly needed as a drilled hole on the side with a brass tube alone is sufficient for a pivot on the "set" (or is it "reset") wire activated by the passing rotor magnet. What hidden mechanisms are accessible from those holes? I have a gas station toy solar model of flowers waving back and forth that uses a similar technique to trigger a hidden coil in the base. A finely balanced wheel with precision low friction bearing could conceivably run for months this way on a small button battery hidden amongst layers of plywood. As I said, I love your work, including this one, keep it up.
Hello Oldskool driver. I now understand what you mean and I am sorry that I made those holes . Nor were they necessary. They were created because the up and down rotating shaft in the brass tube had to be axially secured. The ash came out every time. I was able to secure the shaft through the hole. It only became 2 holes because the first attempt failed. When I built this construction I didn't know it would be so successful on youtube. I now regret not applying an invisible solution. Thank you for your attention. There is no point in recovering afterwards because the film is already on the internet.
s I explain in the video, I let the magnet turn 90 degrees when the large magnet passes.
I started building with this idea and to my surprise it also worked (after many adjustments). No free energy but just enough to keep moving.
I showed the device to some people who had studied physics. They say that it is not possible due to some natural laws and that the device will stop after some time. But the device was still running when they left. That was after 2 pm.
After that I stopped the wheel myself because after some time I became crazy about the ticking and because I want to keep it whole for later demonstrations. Everything wears out and nothing lasts forever
Feedback sturen
Geschiedenis
Opgeslagen
Community
Sorry I did this with google translate and that is not good
As I explain in the video, I let the magnet turn 90 degrees when the large magnet passes.
I started building with this idea and to my surprise it also worked (after many adjustments). No free energy but just enough to keep moving.
I showed the device to some people who had studied physics. They say that it is not possible due to some physic laws and that the device will stop after some time. But the device was still running when they left. That was after 2 hour.
After that I stopped the wheel myself because after some time I became crazy about the ticking and because I want to keep it whole for later demonstrations. Everything wears out and nothing lasts forever
How long did it run?
What if you combined this with a overbalanced wheel?
Can a voltage multiplier help the out put
are the magnets fixed to the wheel with iron screws or aluminimum rivets? I cant see clearly
Steven the screws are from stainles steel
@@perpetuummobile5068 if there is no motor in the hub then that is pertpetual motion and there a 5 million dollar prize, also the wheel self starts with no push.
@@stevenbishop8625 yep,no hidden batterys or wired cable sticking out of it, so it’s completely perpetual, now to avoid the fricktion ccaused by heat, we should keep this machine on a cold place,
So let’s say we will put a dynamo into this machine sothat it can generate 12 volt, now in case it could only generate 1 volt,well then we can make 12 of these machines and wire them up together to produce 12 volt,then that 12 volt can be feeded to an transformer to generate 120 volt, sothat you could power your water cooker, a stove, a microwave or a frigurator etc,,,
Or how about charging peoples car for digital payment sothat you can get just rich while keep sleepinh, heeey heeey😊
@@stevenbishop8625 Doesn't matter if it needs a push to start, only that it's still running a year later.
Good evening ! I know he's stationary, and you stop him so he doesn't wear out, but if you let him run straight, won't he stop?
The longest run was 2 hour(my visiters left my house. I donot see a reasen why it will stop except mechanical failure and wear.
@@perpetuummobile5068 Ok, Thanks
@@perpetuummobile5068 acho que funciona e no e falso para mim por mias experiência com imá , eu acho que tenho todos os materiais para replicarlo se u senhor permitir , lá pergunta e que medidas tem os imá da roda e que diâmetro tem só a roda de madeira , eu no vi todos os seus vídeos mas por falta de tempo kkkkk acho muito interessante esse projeto obrigado
This is an overbalanced gravity wheel using magnets to create the overbalance effect. The wheel is divided into two halves. The half with the small magnet makes the large magnets on that side of the wheel "lighter" than the magnets on the opposite side. So the other half of the wheel is "heavier" and gravity pulls that side of the wheel down. A second mechanism placed exactly opposite the first one, but with the small magnet flipped, would make that side of the wheel even "heavier", thus increasing the effect.
You are on the right track. If you made one of these machines as tall as a windmill, you would be able to generate useable electricity from it. I challenge you to make a bigger wheel that will turn a tiny generator that will light a single LED. This will prove that you can generate electricity from this system.
And here is a tip to make it even more powerful: make the rim of the wheel as heavy as possible. This will turn it into a flywheel and give you more power to turn an electric generator.
Geweldig om te zien. Dit soort vindingen maken mij erg blij. Op de middelbare school heb ik ooit een idee laten zien van een magneet aangedreven motor die qua werking lijkt op deze. Echter mijn leraar wees mij op 'de wet van het behoud van energie'. Dit heeft mij gestopt om het wiel ooit te gaan bouwen. Het is mij dan ook een groot raadsel hoe dit wel werkt. Zit er dan toch meer achter de werking van permanente magneten? Zeg me alsjeblieft niet dat er een motortje in zit, anders zou ik zeggen: Zeer knap gedaan!
Het inspireert mij in ieder geval om meer open-minded te kijken naar dit soort filmpjes en wellicht weer eens wat te experimenteren. (En met filmpjes bedoel ik niet de CD en hot-glue filmpjes, daar prik ik wel doorheen)
p.s. ik zou graag een keer komen kijken, als dat mogelijk is
Hallo Wim. Leuk om een reactie in het nederlands te krijgen .(ik vraag me af hoe weet dat ik nederlands ben) Het is waar dat mijn machientje volgens Natuurkunde wetten niet kan maar het is toch nog gelukt het te laten bewegen. Ik woon in Drachten als dat niet te ver is kunt u langskomen . Zet uw e mail adres in een reactie dan kunnen we verder communiceren. groet Sam PS ik ga nu een week op vakantie.
@@perpetuummobile5068 Hallo Sam, een aantal reacties hiervoor zag ik uw reactie in het Nederlands. Ik woon in de buurt dus ik kan langskomen wanneer het u uitkomt. Mijn email adres is willempie86@ziggo.nl
Groet, Wim
It would be great to increase the number of magnets in the rotor ... that way a permanent system with constant speed would be generated
Hi Luis, Smart idee but.... If I mound more magnets on the wheel the small magnet has no time to fall back and the result is negative . I tried this allready I think that the reason is that the magnetfield are no longer seperated and that gives disturbence
I was just watching a video about magnets and had a very similar revelation, surely this could be used to generate energy. As far as I'm aware, the magnetic force will never become less efficient, and the metals will not fade either. Why has nobody done this on a much larger scale as a viable, free and theoretically unlimited energy supply?. I know resistance needed to generate the energy would be an issue, but on a massive scale it shouldn't be much of an issue. Even suspending the wheel using more magnets at the centre will mean no resistance or wearing of bearings. It's crazy but it must be a viable option.
I have finally found somebody who can reproduce what the sages of old have told us about for millenia
What are the items on the spokes on different distances from the hub?
Hi Micke The items you see on the spokes are weights that I can slide over the spoke and can fasten with a scew. the function of these spokeweights are to balance the wheel.
@@perpetuummobile5068 And for some strange reason you need one on every spoke. Funny how cars, bikes, etc. don't need that.
U want to have a wheel to move then do this manually is the idea? I know how to make engine using magnet and electricity only, this machine can create electricity to power the engine(my own creation), its never seen before and true do you believe?
great,I wan't made one,do you sell the plan?
It is very simple, magnets propulse wheel and their magnetic field is not weakened in the process as it is recharging from earths magnetic field. As long as earth is rotating this device will work. That is the secret of "free energy", it is not free, not against physics laws. The battery in this case is earth itselt.
This is a very good explanation of why my machine works. I had never heard of this theory. My family and acquaintances tell me; This cannot work because of physics laws.
I can hardly deny these laws, which is why your statement is very valuable
@@perpetuummobile5068 Well done! my added explanation is that the magnets have 'latent' energy, they took time and energy to make and as such are a very good storage, all that is needed is to coax out that latent energy with some good old fashioned ingenuity and clear and methodical thinking. I agree no so called laws are broken but just using existing forces. What you have done is monumental actually because it can show that this in fact CAN be done and once it is done and made then it can be improved over time. If it were me that had achieved this I would be elated and satisfied. So again well done especially for your open source honesty. I find your conclusion actually too modest. Imagine ten of these each weighing 1 ton, how much energy would that produce? Thank you for uploading
@@johnlannikk2701 That question is easily answered. Given the proposed dimensions, weights etc. there is an exact result that can reasonably easily be calculated. It's quite a simple, but often overlooked calculation and is trivially easy to calculate, when you know how. I'll avoid all the details, they are easy to look up, try google.
But the result is, unusually for this sort of system, exact for any of the variables. The result is, exactly, precisely, unquestionably, zero.
Very goood
How do you cut ceramic magnets straight without fracture? What was magnetic strength reading of final small magnet? The 90 degree flip of magnet does not change poles,- needs 180 degrees change. Coils mounted exterior to magnets do not impede RPM. Can make night lights with white leds. You can also shield pole with tin sheet then rotate out of position using same turning mechanism. Magnet-steel ball-sheet-magnet, then ball shifts.(The Ecklin Patent with horse shoe magnet + output take off power from reciprocating weight on double springs.)
Ceramic magnets are very difficult to saw or cut . Perhaps grinding is possible. But there was no need for that . The smaal magnet comes from a small brushles motor .90 degree turning is just enough as you see,
it has been a couple of months now... when did it stop?
This magnetic motor is usually stationary. I start it up for a demonstration and stop it when the visit is gone. The longest running time was 2 hours. The reason for this is the annoying ticking sound and; I want to keep it whole for the next demonstration
@@perpetuummobile5068 so basically you stopped it because of getting annoyed by that stticking sound ,right,
If friction will stop it ,i suggest put liquid cooling get into it and/or put it on a very very cold place.
If it does not run on a battery, then how did you stop it????
Perfect sound for sleeping
Your sleep can be perpetual with this sound
It sounds almost like a exhausted horse walking slowly.
Mag ik deze machine in het echt komen bekijken?
Maybe adding more big magnets can help
It can't.
You did it man you did it !!
Yep, while scientists says that such perpetual motion machine is impossible and so therefore don’t exist, with the reason that because of the thermodynamic rule of mother nature,that you cannot get energy out of nothing, you have to put energy in before getting energy out ,
However ,this amezing perpetual motion breaks this law , you don’t have to feed it with energy , it just will run out of itself indefinitly unless heat & friction will stop it, but even that can be eliminated but put it into a very cold place and/or put liquid cool gel into it😊👍.
this screw in the center of the magnets are necessary to have?
Yes this stailess scews are necessary ,otherwise the magnets fell of the wheel.
@@perpetuummobile5068
but are they attracting the small magnets?
their function is just to hold the magnet on the wheel?
@@glaysonmestre Yes these are nonmagnetic stailess srews.
The wheel doesn't run forever. The one I made in 2004 started, speed up, and maintained motion for a while but the magnets eventually ware out, so the energy used to make the magnets is less than the energy gleaned from these magnets by this device. The magnets are sort of a battery, but gauss is lost as the friction between the magnetic forces thats created when the opposite forces come into contact with eachother...
That is interesting. Can you show us a video of your wheel?
@@LegoStopMotionAnimationMovies I'm busy with other projects now, that was my first invention. It helped me to learn about the mrchanical abilities and limits of magnets. Building these is a waste of time. Solar power and gravity batteries, super capacitors, solid state electrolyte for electrolysis, etc are my new hobby now.
@@LegoStopMotionAnimationMovies magnets ware out :)
THANK YOU TO EXPLAIN AND SHARE VIDEO YOUR ENOVATION ,VERY APPRECIATE . YOUR GOOD PERSON .
P.S. : MAYBE YOU CAN TRY AND MORE MAGNETS AROUND FOR SPEED ..??
I'm still trying to work out how he benefits from this. If he's not, somehow, making money from it then I can but guess it's an ego trip.