Hello can you help me? I have passat cc 2008. I know where to connect every whire of led strip with no problem. But when it gets signal it just blinks and turns off. Do you know what is the problem? Do I need CANBUS?
Hello, Please try to connect the led strip direct with battery and check if the turn signal led is working properly. If the problem still exists then there is some problem with the LED Strip.
Where else to connect the positive and negative wires? Didnt want to ran a wires all the way to the front and connect it to the battery terminal. Is there anyway i could do that?
Bro can u help me buying this product need 3 nos. Link which u have share says can’t be shipped to India. So where else can i get this strip to bangalore
hi boss is the positive (red) and the running light (pink) have same connection in the possitive wire of the park bulb? and the negative (black) is connected to the negative of the park bulb? is thst right? pls answer boss thank you
Yes both can be connected to parking bulb. but both cannot be connected at the same time you have to choose any one option. Either only blue running light or RGB dynamic lights.
austin samuel should consider the rgb to its own on off switch that way you can power it whenever and wherever even if the cars is parked locked and off seems more logicall that way to me
I don't want the blue led glowing while my running light on, and also intend the all system only works when my running light on (at night). If I connect the positive cable to the running light (not to battery) is it ok ?
Don't connect the pink wire and connect the positive wire(+) to the parking bulb of the tail light. By doing this the blue running lights will not glow but all other functions will work as it is.
For i10 car its difficult, you cannot fit like this. the main wire you have to take from battery or from the tank connection wire (it will work only during switch on). its not so easy as shown in this one.
My light blinks while braking and then does the turn signal. So could I add a diode to the brake light wire going to the module? So it wouldn’t blink red when braking at the same time I’m using my turn signal?
Tuga em Bristol, Red wire is of positive supply. It needs to be connected to any one of the rear parking bulb (bulb which constantly glows when lights are switched ON).
Connected mine to my tail lights that need to be on at night, not the brake lights. Also the black (-) wire to that tail light black wire. Hopefully this is right
Greetings as I can do to remove only the runnig ligth and leave the other functions is that no.I like how it looks the sky blue color all the time on. Thanks from now
I'd like to know the answer to this as well. I like the idea of it being more subtle and not having the running light on. I was thinking that maybe the acc wire not being wired up might work.
If you dont connect the wire thats for the running lights it'll work fine. In my country its a 480 dolor fine if you use RGB in the rear or front but the turn signals and the brake and reverce can be used no problem. Just dont wire in the running lights and done
Carlos Rodriguez, Yes, you can remove the running lights just by removing or not connecting the running lights wires. According to my video i have pink and green wire as running lights(pink wire for ice blue lights and green wire for RGB lights). So by simply not connecting those two wires will cancel the function of running lights and all other function will be working fine. Thank You
What is width lamp don’t under please explain
Hello can you help me? I have passat cc 2008. I know where to connect every whire of led strip with no problem. But when it gets signal it just blinks and turns off. Do you know what is the problem? Do I need CANBUS?
Hello,
Please try to connect the led strip direct with battery and check if the turn signal led is working properly. If the problem still exists then there is some problem with the LED Strip.
Sir adopter may kon kon si tare lage gi
Where else to connect the positive and negative wires? Didnt want to ran a wires all the way to the front and connect it to the battery terminal. Is there anyway i could do that?
There will be positive and negative wire coming in tail lights. You can connect it with it.
Bro can u help me buying this product need 3 nos.
Link which u have share says can’t be shipped to India. So where else can i get this strip to bangalore
Red amber and white would be far more useful, especially if you could set the amber to act like indicator lights.
hi boss is the positive (red) and the running light (pink) have same connection in the possitive wire of the park bulb?
and the negative (black) is connected to the negative of the park bulb? is thst right? pls answer boss thank you
Yes its correct
@@KaranBakrania if i do that reverse light not working.... i don't know where to connect the steady blue light
Hi Karan
I want to buy this multicolor led but unable to by can you pls available this In pune
How do I connect the hazard lights? Now connect the directional lights. Regards
If i dont want rgb ( dynamique running light ) what should i have to do
Simple don't connect the green wire. Leave it as it is.
Can you pick just one Dynamic Flowing option or does it rotate? Also, can this be trimmed to fit smaller spaces?
No, cannot pick one option in dynamic. It will keep rotating.
Isn't running light(blue light) and dynamic rgb light have same connection which is parking bulb of tail light ?
Yes both can be connected to parking bulb. but both cannot be connected at the same time you have to choose any one option. Either only blue running light or RGB dynamic lights.
@@KaranBakrania thanks for your prompt reply subscribed your channel👍
austin samuel should consider the rgb to its own on off switch that way you can power it whenever and wherever even if the cars is parked locked and off seems more logicall that way to me
I don't want the blue led glowing while my running light on, and also intend the all system only works when my running light on (at night). If I connect the positive cable to the running light (not to battery) is it ok ?
Don't connect the pink wire and connect the positive wire(+) to the parking bulb of the tail light.
By doing this the blue running lights will not glow but all other functions will work as it is.
@@KaranBakrania thanks for prompt & clear instructions, best regards from me
Can u help me how to install my car Honda Accord 2012
For i10 car its difficult, you cannot fit like this. the main wire you have to take from battery or from the tank connection wire (it will work only during switch on). its not so easy as shown in this one.
What kind of multi tester is that?
My light blinks while braking and then does the turn signal. So could I add a diode to the brake light wire going to the module? So it wouldn’t blink red when braking at the same time I’m using my turn signal?
Danyo,
The break light will blink for 3-4 times and then it will glow constantly.
Sir boot light kitna fit lamba he please batae
Length is 47.6 inch or 121cm
Bhai meri led strip me multicolor nhi h iceblue h
Hi
Thanks for your video.
Witch watch model you wear in this video?
I like it.
That's Kingwear KW88 😀✌🏻
Its smart watch?
@@moranatal22 Yes
to which light of the rear lights should i connect the red wire? thats my only problem... i dont know where i should connect the red wire :(((
Tuga em Bristol it can be connected to positive battery terminal
Tuga em Bristol,
Red wire is of positive supply. It needs to be connected to any one of the rear parking bulb (bulb which constantly glows when lights are switched ON).
Connected mine to my tail lights that need to be on at night, not the brake lights. Also the black (-) wire to that tail light black wire. Hopefully this is right
@@danyo5509
Yes correct
@@KaranBakrania plz can you help how can I install this light in crv 2017..
Where i can take 12v for the red wire
From tail light positive wire
Hey Karan, I buy a lights and I do not understand, please help me, I have a fiat 500x
What you don't understand?
Greetings as I can do to remove only the runnig ligth and leave the other functions is that no.I like how it looks the sky blue color all the time on. Thanks from now
I'd like to know the answer to this as well. I like the idea of it being more subtle and not having the running light on. I was thinking that maybe the acc wire not being wired up might work.
If you dont connect the wire thats for the running lights it'll work fine. In my country its a 480 dolor fine if you use RGB in the rear or front but the turn signals and the brake and reverce can be used no problem. Just dont wire in the running lights and done
Carlos Rodriguez,
Yes, you can remove the running lights just by removing or not connecting the running lights wires. According to my video i have pink and green wire as running lights(pink wire for ice blue lights and green wire for RGB lights). So by simply not connecting those two wires will cancel the function of running lights and all other function will be working fine.
Thank You
I dont no where connect green wire
Connect Green wire with(tail light) the bulb which glows when you turn on the parking lights.
@@KaranBakrania thanks
Спасибо за видео
What is the positive wire ???
Red wire is Positive wire. It needs Direct supply for the LEDs to work
Plzz make a video i want to install it on my car...
Make a nice video of a car
where can i buy this stuff?
Links in the description
I need detail connection for my i10 magna car
Slm arkadaşım bu ledin kodu varmı neden aldın bankada atabilirmisin
Harga nya berapa mdn beli nya dimana
Ahhh I see it's just a 12V power supply I just got it on Amazon
It's a same led
price? and purchase link please
chetan kurle,
Please see the description box, you will find the link there.
Thank You.
Ok
I need help.
Victor J Castillo,
What help you need?
If I want the daytime running late to work where do I hook up the wire to