Perfect! I had to use a hair dryer because I didn't have a heat gun : it works if you're patient enough to get all the edges well hot. Thenb I did everything you did and now the tablet is fixed ! Thank you for your time !
Nice thing about a hair dryer, Same, is it's hard to overheat things. I have a 1,000 watt [Harbor Freight] heat gun and it will melt the case if you aren't careful. I'm not sure if the heat breaks down the glue or just loosens things up due to expansion. Works great, though! 😉😊
Very nice and the camera work is great! Thorough and detailed visual presentation without vocal explanation. 😎 The rubber bands are a great idea. I didn't have those cute little clamps, so I used several fat books to hold the screen in place. I used T-7000 glue and if you are Lilliputian or have a microscope, it says to allow to cure for 48 hours. Thanks!!
Ok, so I have a heat gun. What is the temperature you normally use? Also. The adhesive you use, It's just called T-800? And what are the two tools you used to scrap out the old adhesive and then the other one to shave off the new left over adhesive? I feel like I can definitely do this but I want to make sure I do it right tho obviously. Thanks in advance!
Im having issues of ghost touching and noticed the glue strip is coming loose and my screen is starting to seperate. Question, does the screen work when its not secured? Do you think my digitizer is causing ghost touching or just reglue it?
Have you clean your screen with alchohol? If yes, alchohol damages touch sensitivity. You will need to replace the digitizer if you know a shop who specializes in digitizer replacememt or replace the whole screen wish is more expensive
@@RM-en9gk it was the factory glue came loose the screen was beggining to pop out causing crazy ghost touching i just tore out the screen (carefull not to hurt any wires left them all connected) pulled out all the bad glue was like cheap rubber, put a tiny bead of silicone adhesive going around and stuck it back in. 5 months later daily use thrown around still good fixed it for good
Yes, but you will need more expensive machines to get the job done since this tablet lcd screen is glued with oca. You will need a vacuum heat screen remover - Screen laminator- and bubble free machine. A heat gun will not get the job done.
La mía esta rota del vidrio y aparece ahora una mancha negra en la parte de arriba y ya todo distorsionado, que habría que cambiar, el touch o también la lcd?
Hi, i bought this screen from a supplier long time ago and he dont have in stock any more. If i found any thing else, i will reply again for sure. Thanks.
Perfect!
I had to use a hair dryer because I didn't have a heat gun : it works if you're patient enough to get all the edges well hot.
Thenb I did everything you did and now the tablet is fixed ! Thank you for your time !
Nice thing about a hair dryer, Same, is it's hard to overheat things. I have a 1,000 watt [Harbor Freight] heat gun and it will melt the case if you aren't careful. I'm not sure if the heat breaks down the glue or just loosens things up due to expansion. Works great, though! 😉😊
Very nice and the camera work is great! Thorough and detailed visual presentation without vocal explanation. 😎 The rubber bands are a great idea. I didn't have those cute little clamps, so I used several fat books to hold the screen in place. I used T-7000 glue and if you are Lilliputian or have a microscope, it says to allow to cure for 48 hours. Thanks!!
thank you very much for the good tutorial sir..
Merci
Amazing content broo .. keep it up
What's the screen glue?
Ok, so I have a heat gun. What is the temperature you normally use? Also. The adhesive you use, It's just called T-800? And what are the two tools you used to scrap out the old adhesive and then the other one to shave off the new left over adhesive? I feel like I can definitely do this but I want to make sure I do it right tho obviously. Thanks in advance!
Thanks it is helpful
How much did it cost for the whole screen? I mean when you bought it from your supplier?
I am sorry to say but my supplier is already out of stock. Plz check www.mobilesentrix.com if they got in stock. Thanks.
@@cellfonetech4277 Thank You
When looking search lcd not screen or it will only show you front glass
CHECK AMAZON, I GOT MY SCREEN REPLACEMENT FOR 23$
@@TwiztedSmoke my screen also damaged how I change
how long did you wait for the T-7000 adhesive to dry?
Just let it rest 24 hrs
Im having issues of ghost touching and noticed the glue strip is coming loose and my screen is starting to seperate. Question, does the screen work when its not secured? Do you think my digitizer is causing ghost touching or just reglue it?
Have you clean your screen with alchohol? If yes, alchohol damages touch sensitivity. You will need to replace the digitizer if you know a shop who specializes in digitizer replacememt or replace the whole screen wish is more expensive
@@RM-en9gk it was the factory glue came loose the screen was beggining to pop out causing crazy ghost touching i just tore out the screen (carefull not to hurt any wires left them all connected) pulled out all the bad glue was like cheap rubber, put a tiny bead of silicone adhesive going around and stuck it back in. 5 months later daily use thrown around still good fixed it for good
Where can I get a good quality screen for it?
What is price ?
Can the glass alone be changed? instead of the whole thing
Yes but this requires heat pad and lots of patience lol also your need the adhesive to fix the glass to the lcd
i haven't tried, but it could take more time and patience if you will do just the digitizer.
Yes, but you will need more expensive machines to get the job done since this tablet lcd screen is glued with oca. You will need a vacuum heat screen remover - Screen laminator- and bubble free machine. A heat gun will not get the job done.
I'm getting some whitish line on side of my tab. It is still in warranty but can anyone tell what is the reason
Kitane rupe ki dalti h bhai
MERCI ! ! ! ! !
How many cost
This repair was dont in Edmonton, Canada. Prices always varies. You have to check with your local area repair store for pricing. Thanks.
Hi !
It’s possible change only the digitizer or not ?
I was jus bout to ask the same thing
i haven't tried, but it could take more time and patience if you will do just the digitizer.
It’s hard as fuck not to damage the lcd. I used E string of a guitar to separate screen from digitizer
The screen sits inside the outer bevel. Do not try to remove the bezel unless you have a replacement.
my tab has black screen, but have display, just no ba cklight. should i replace the whole lcd? tried unplugging the lcd, same result :(
La mía esta rota del vidrio y aparece ahora una mancha negra en la parte de arriba y ya todo distorsionado, que habría que cambiar, el touch o también la lcd?
Ambos vienen juntos, se cambia la pantalla y el digitalizador que es el touch
Nice
Please give me the link of screen ......I am searching from so many days but did not find...
Hi, i bought this screen from a supplier long time ago and he dont have in stock any more. If i found any thing else, i will reply again for sure. Thanks.
Please tell me what is the cost in india
How much rs
Where can I buy the screen??
My supplier is out of stock. If i found any other source, i will reply again for sure. Thanks.
Pregunta, hacerle esto ala table puede borrar sus datos ?
No solo se cambria la pantalla
I'm on it now
And tab work properly after fix these
Bro can you replace mine too
Slow down... stop putting music
I have a cracked ipad and it's the same Samsung I want it fixed😭😭😭😭
How do I get the screen I got the tech guy
You can order through amazon easily. Just input the exact model.
How much is it on Amazon? I found it for about $160, is this reasonable? I found it on Ali Express for $50
Fiyat ne kadara
Ogrene bildinizmi banada soylermisiniz fiyati
This seems like a very reputable video. No cuts etc - just "here's me fixing a tab."
Not me watching this on my perfectly fine tab a7 💀💀
My tab was broken
WTF DO I DO WITH NO HEAT GUN OR NO INSTRUCTION
Don't put music.