Hi I am really struggling to get the roof console out. Tried on 0.25x speed but stiöl can not see what you did. Are there just clips? Did you pull from the back of the console? Would very appreciate your help
Hey mate, great video! Just wondering if they provide a template for where you drill through the gutter? If not, how do you work out where to drill? Cheers 🍻
I wish you did a tutorial just for dropping the roof liner lol. Going to install this roof rack soon but dropping the roof liner is by far the hardest part. Even at 0.25 speed I have no idea what's going on. Is there any manual online that I can use for this? I can't find any. Otherwise great video though.
Its pretty simple but fidly Remove all the grab handles and the plastic trims from pillar between the front and rear seats. Trim from the A pillars Remove the roof console etc and then slowly remove / drop the lining down You will have to bend it bit to fully remove it form the cab, I’d suggest removing the front seats to make your life much easier
Ooooohhh you could bend the liner. But you could leave a crease in the liner if you bend it too much. Unfortunately with these sorts of installs you gotta take the longer route and proper route. As I said might as well sound deaden and insulate the roof whilst it was down. Lets us know how you go if you do end up getting it done without dropping the entire liner
How do you remove the seat belt trim. I habe everything off but cant work out you you took the plastic trim from the front and rear seat belt assembly.
if it's the area I'm thinking about, it's just clipped in. if you have a trim removal tool you should be able to get behind it and pry it part. As they are held together by trim clips
no wind noise at all. I just did the deadening and insultation whilst I was there. I can tell you from experience the insulation does help on those hot summer days
Hi I am really struggling to get the roof console out. Tried on 0.25x speed but stiöl can not see what you did. Are there just clips? Did you pull from the back of the console?
Would very appreciate your help
Hey mate, great video! Just wondering if they provide a template for where you drill through the gutter?
If not, how do you work out where to drill?
Cheers 🍻
Hey mate, they don't provide you with a template. However they do provide you with the measurements for the holes to drill the gutter
Hey Mate, did you end up using both boxes of the sound deadening or just the one box ?
How is the noise, and if you did not do the sound insulation, can you comment on how noisy that platform would be?
I wish you did a tutorial just for dropping the roof liner lol. Going to install this roof rack soon but dropping the roof liner is by far the hardest part. Even at 0.25 speed I have no idea what's going on. Is there any manual online that I can use for this? I can't find any. Otherwise great video though.
Its pretty simple but fidly
Remove all the grab handles and the plastic trims from pillar between the front and rear seats.
Trim from the A pillars
Remove the roof console etc and then slowly remove / drop the lining down
You will have to bend it bit to fully remove it form the cab, I’d suggest removing the front seats to make your life much easier
@@AdventureN cheers mate.
Yeah, can you get away with taking the sides down only of the roof liner? Would it be enough to get to the nuts. I have the same rack to install.
Ooooohhh you could bend the liner. But you could leave a crease in the liner if you bend it too much. Unfortunately with these sorts of installs you gotta take the longer route and proper route. As I said might as well sound deaden and insulate the roof whilst it was down. Lets us know how you go if you do end up getting it done without dropping the entire liner
@AdventureN thanks I'll take the liner completely out..
How do you remove the seat belt trim. I habe everything off but cant work out you you took the plastic trim from the front and rear seat belt assembly.
if it's the area I'm thinking about, it's just clipped in.
if you have a trim removal tool you should be able to get behind it and pry it part. As they are held together by trim clips
Use auto motive sikaflex, some silicones can eat into paint work
Mate,
How did you remove the door handle sticking to the door pillar?
There is a little window that you pry open to get to the 10 or 12mm bolts
How is the noise, and if you did not do the sound insulation, can you comment on how noisy that platform would be?
How is the noise, and if you did not do the sound insulation, can you comment on how noisy that platform would be?
i am curious like you mate, i hope he answers :)
How is the noise, and if you did not do the sound insulation, can you comment on how noisy that platform would be?
no wind noise at all. I just did the deadening and insultation whilst I was there. I can tell you from experience the insulation does help on those hot summer days