Відео

I have the same suspension fitted to My Hilux this week, and wheel alignment done all by a reputable dealer. impressed with the fox/ cal product, but it is driving rubbish not handling good on open road/ highway, brought it to my local mechanic, he won't touch it as it's modified now, should i replace UCA

Hi mate, i hope you painted the drilled holes. Otherwise, they will rust very quickly. Using house silicone will also help it rust faster, so is a big no no. You need automotive silkaflex

Does this unit require a aerpro antenna adaptir and camera adaptor?

What grit sand paper did you use ?

No footwear was definitely a decision 😅

how come all the things that "protect the paint" on your truckbed, just destroy or remove the paint?

Just love how he did this next to all the other cars in an open parking lot area of an apartment complex. What a joke.

I have a long bed c10 how many cans do you think 4 or 6 cans beds length is 8ft

Is this lifted? And why need of BMC? Does it rub to the body mount?

does it turn on without car key inserted? i have yellow wire connected to constant power, red wire connected to acc, but it does't turn on without car key inserted. i have kenwood dashcam, because when the car is turned off, it doesn't have power, thus it does not perform parking monitoring ( why would it even need the yellow wire )

Is this stuff just as hard as Linux or rho Gard?

This one of the best videos i've watched as I've gone down this rabbit hole of DIY bed liner jobs. Excellent video.

my 2005 car has ground (0v) and positive (0v) for the reverse light with the old head unit(when i put gear on reverse, the positive wire becomes +12v), after i replace it with the new kenwood head unit, the reverse light has ground(+12v) and positive (+12) all the time (when i put gear on reverse, the ground wire becomes 0v ). do you know what's happening?

How did this install impact on audible road noise, due to removing the back carpet? Has it made cabin noise noticeably louder since installing this? Fwiw its massive, I'd like something smaller in size for my hilux.

Any rubbing issues with the p12 offset ?

Hey Mate, did you end up using both boxes of the sound deadening or just the one box ?

Hi I am really struggling to get the roof console out. Tried on 0.25x speed but stiöl can not see what you did. Are there just clips? Did you pull from the back of the console? Would very appreciate your help

It cost me $159 with 4 bottle kit and gun. I had tape and drop cloths. Bought some etching spray from HF. It took 1.25 hours to prep including going to the store to get a wire wheel(they nylon ones took forever). Spraying was around 20 minutes each coat x2. The cheapest I found around Philadelphia was $650 and it would be 2 days in their shop. I love how it came out AND I saved almost $500 bucks. Now all my buddies want me to do theirs.

Did you have to do BMC?

Hey mate, what does SSM mean?

What offset are these?

Nice work. The only thing I would had done differently is I would have covered the bare aluminium of the mounting plates with something that would insulate the wires from ground. I realise that it is paranoid but I figure on the off chance that a positive wire loosens and moves if it touches the mounting plate, it won’t short the battery. I have the same battery myself in a Landcruiser with the same dcdc charger BTW and love it.

Well, those look horrendous, but - to each his own 👍

How many quarts

I want to do the roof of my camper but not sure how it will bound to the roof now.

What offset are you running?

How do you remove the seat belt trim. I habe everything off but cant work out you you took the plastic trim from the front and rear seat belt assembly.

Not worth all the time, effort and materials when you can get it professionally done with a warranty for around $300

Use auto motive sikaflex, some silicones can eat into paint work

Roll-on is where its at. Just ask project farm

Gonna do this in June on my 95 tacoma

What psi do you recommend for this. I see the instructions say 50-60. I just want to know what you use. Look great by the way.

Nice work! How many bottles did you use?

Wash the bed with Dawn let it dry. Wire wheel on a grinder (buy 2), staying away from edges. Sand as you would by your hard line. I apply Primer sealer first.

Hey how was the fox suspension planning to buy one on my n70

Dont waste your time on this shyt in 20 years its going to look like azz and to restore it its a fukn pain

Does your coil conversion have to be pre rego to fit? What’s the process and cost?

Doesn't it rub off with minimal use ?

How is the noise, and if you did not do the sound insulation, can you comment on how noisy that platform would be?

How is the noise, and if you did not do the sound insulation, can you comment on how noisy that platform would be?

How is the noise, and if you did not do the sound insulation, can you comment on how noisy that platform would be?

How is the noise, and if you did not do the sound insulation, can you comment on how noisy that platform would be?

You crushed that. Definitely not fun but so worth it.

The new AS/NZS3001 Regulations are not applicable to inside vehicles as they are not classed as habitable areas. Thankyou for your detailed video!

I'm about to paint a whole ass RV with it. I'm nervous

I wish you did a tutorial just for dropping the roof liner lol. Going to install this roof rack soon but dropping the roof liner is by far the hardest part. Even at 0.25 speed I have no idea what's going on. Is there any manual online that I can use for this? I can't find any. Otherwise great video though.

Nice install mate, does it conform to the new battery regs? I think it needs to be in a sealed box and vented to the outside as it's in a habitatable space.

Mate do you know what the actual fox part numbers are

Mate, How did you remove the door handle sticking to the door pillar?

Yeah, can you get away with taking the sides down only of the roof liner? Would it be enough to get to the nuts. I have the same rack to install.