Hey Nick. Sitting uneven is actually a pretty common thing with 4Runners. You can either lift up the front on the low side or you can add a spacer to the rear spring to lift it yotaxpedition.com/products/arb-ome-rear-trim-spacer-for-driver-side-lean
Depends on how much weight you have on the front, which is the only reason you will actually adjust it, but yes it will be stiffer depending on how much weight you’ll have to compensate for
@@yotaxpedition In the rear 1.5 add-a-leaf icon recommends to remove the overload spring but some people leave it to get 2" in the rear instead of 1.5".
Diff drops are very controversial. Would I say you NEED one? No. Our friend Tinkerer Adventures did a very good in depth video on this topic if you want to watch it.
New to overlands. Bought a 2018 4 runner SR5 with icon coilovers and the car is one inch taller on the right rear , is there an adjustment here?
Hey Nick. Sitting uneven is actually a pretty common thing with 4Runners. You can either lift up the front on the low side or you can add a spacer to the rear spring to lift it yotaxpedition.com/products/arb-ome-rear-trim-spacer-for-driver-side-lean
Damn she’s coming along nice 😍
Thank you!
Wat size spanner and is it the same for stage 1 and 2?? 🙏
Yes it is the same for stage 1 and 2.
did you not need a uca?
Uca's are not needed but are recommended when lifting your Toyota
Do I need to get the front end alined again after I do this?
Yes, after adjusting your coilovers your front alignment will be slightly off.
Do you have to do a alignment again after
Yes you should. After lifting your truck more, your alignment will slightly be off again.
Did this make it really stiff or not really noticeable?
Depends on how much weight you have on the front, which is the only reason you will actually adjust it, but yes it will be stiffer depending on how much weight you’ll have to compensate for
Does this drop right in with kdss or do i need that spacer thing?
When lifting a kdss 4Runner, it is recommended to get the spacers for the sway bar bracket
@yotaxpedition if you're only leveling out the front no more then 2.5 inches will it still need it?
Did you guys remove the overload on the rear?
Hey Jesse, can you specify on what you mean by overload
@@yotaxpedition In the rear 1.5 add-a-leaf icon recommends to remove the overload spring but some people leave it to get 2" in the rear instead of 1.5".
The 4Runner doesn't have leaf springs in the rear. We swapped out the coil spring for the new one from Icon.
Do you need a differential drop for this lift
Diff drops are very controversial. Would I say you NEED one? No. Our friend Tinkerer Adventures did a very good in depth video on this topic if you want to watch it.
Can you add a spacer lift to lift it higher for bigger tires
Technically yes, but I would not suggest doing that.
Can I adjust mine without a jack?
Its going to be very difficult to turn if not impossible with the weight of the truck on the spring.
Stage 1 or 2 icon ?
This is the stage 1 kit.
When you adjust coil over like this do you need alignment?
Yes, your alignment is going to be a bit off. No different than putting in a bigger lift kit.
You guys selling snorkel?
Yes, here is the link yotaxpedition.com/products/snorkel-intake