75 HP Micro Jet Boat Build. Aluminum Welding
Вставка
- Опубліковано 25 вер 2024
- Micro Aluminum Jet Boat Build. in this video we start a mini jet boat build . we weld together the kit and lengthen it buy 6'' . in future episodes we will be installing a 700cc two stroke boasting 75HP
Check out our channel @amcustomfab
Videos You Might Enjoy
$30 weld table build • HOW TO BUILD $30 DIY w...
how to build a welding jig • HOW TO Build A Welding...
$65 belt grinder build • DIY $65 Belt Grinder B...
The Welder I Used
primeweld.com/...
Tools i Used in this video Affiliate links
welding rod * link* amzn.to/43brgzC
chain saw *link* amzn.to/3pSUqVH
welding gloves *link* amzn.to/45no71p
mini saw blades *link* amzn.to/41VZFBv
circular saw blade for aluminum link amzn.to/43a2Max
cordless grinder *link* amzn.to/3MGL0pj
long weld clamps *link* amzn.to/42UQRgu
welding helmet *link* amzn.to/3BNm5u5
For business inquiries please email us at: alex@amcustomfab.com
Shipping Address:
AM custom fab
P.O. Box 151
Scappoose ,OR 97056
DISCLAIMER:
Due to factors out of the control of Amcustomfab, we cannot guarantee against improper use or unauthorized modifications of this information. Amcustomfab assumes no liability or responsibility for property damages or injury incurred as a result of any information contained in this video. Use this information at your own risk. Amcustomfab recommends safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Amcustomfab. Be safe!
This video and description contains affiliate links, which means that if you click on one of the product links, I'll receive a small commission.
Hard work desgner ❤
Omg :) this is my dream 😢
Yessssss!!! I love these micro mini jet boats!!!
They really need to sell one thats just a foot longer because I know I could never fit in one unless I skipped the steering wheel.
Yeah that's why I stretched this one 6 in
Bagus sekali mas.dari bahan aluminium.salam kenal dari pandawa aluminium🇮🇩🇮🇩🇮🇩
I love the timing of the “real chain saw” 😂. You knew damn well what some of us were thinking that quick too hahahaha ❤
This is so cool. Structurally, the two critical points are 1) that the hull running surface (the bottom of the boat) is in a flat plane from the original hull across the extension. If the extension creates even the slightest downward “hook,” the boat will porpoise like a SOB. And 2), that the stringer extensions are done properly as they are the primary structural strength for the whole boat.
Looking forward to this!
Great advice thanks for watching 😎🙏👊
Looking nice!
You did the right thing because your shins would take a beating out on the water if they had to ride against the foredeck all day. Every little ripple would be another bruise.
My thoughts exactly 😎
Great job Alex! Been looking forward to this one. It definitely looks cool once you get it all together can’t wait to see it rip!
Thanks for the support 🙏👊😎 I can't wait till it is ripping also
heck yeah! a jib crane will be a valuable asset. I don't have space to move it around or I would build one.
This will be a stationary one up against the wall built in and it will pivot and swing 180°
@@amcustomfab Nice! That's a great way to save space!
Hola amigo felicidades, puedes compartir el link de compañía que envía el recorte del material o dibujos del mini Jet por favor... Muero por uno igual!!!!
我也想要一份图纸😂
You make the coolest stuff. That is going to be so much fun!
Interesting project but that's a lot of TIG welding!! The last jet boat build I looked at was a full size boat and he weled it with a spool gun. Keep up the interesting videos. Thank you.
Thank you for watching 😎 appreciate the support.
The usual good job Alex. I'd definitely b adding as much structural support as possible. You're a big guy. Hit some rough water and you'll be glad u did. Looking forward to t next vid. Take care. B safe. J.
Thanks for the support 😎🙏👊
That will be awesome!!
I've had a lot of interest in these mini jet boats for a few years now. I like small and over powered BUTT 6-foot seems soo short had to go to JS site to actually see how the engine & pump assy fit. The hull lines look so awkward being the depth is too much along with the windscreen being too large as the bow is really blunt. If the design could be stretched out to 8-foot and the windscreen redone, there might be a good combo. The 6-foot'r with a 15hp outboard was another idea came to mind. I was 10 y/o (Elvis died) when I built the Glen-L 8-foot Tiny Titan hydroplane during summer break. Had a deep fascination with boats ever since. I like JollyRoger sprint boat build channel. That's the look in the hull shape & design I see except smaller like a go-kart for the water. Looking forward to your next stage of the build.
Thanks for watching yeah agreed it's definitely small that's why I stretched it 6 in and I think I'm going to stretch the pump box out another 6 in under the swim deck .so I can push the motor back as far as possible.
Nice work!!
Dope thumbnail haha
請問你組裝迷你噴氣船的配件,如何購買?謝謝
Yessss!
How do you manage what tools you have at home vs work. I always find myself not having what I need bc I took something from home to work or something to work from home. Great video
That's a hard one some things I just have multiples of and other things I just tried to plan ahead
@AM Custom fab were the black you were wearing welding sleeves with cut resistance?
I don't know if they make the claim to be cut resistant but they do have Kevlar in them which is inherently cut resistant.
I totally agree, the 6 foot kit is too forking short. Why not make it 7 foot? Jetstream should do this! My got damn knees would be up in my face with this 6 foot. Bravo on pushing it out. Jetstream, get your shit together and stop the 6 foot junk model.
Anymore videos for the rest of this build coming?
In process I've just been busy. Sorry but there will be more to come 😎
Did you ever finish!!? I wanna start my build. I need your help
I need to get back on it. Been so busy
Great boat. Where do you got the plans to cut the pieces
It's a pre-cut and bent kit from a company called jet stream
Thanks btw awesome work!!!
Hello! Can you tell me where to buy a drawing of this boat? Cool boat turned out!
Jet stream . com
yo where did you get that mini man eater blade for the Milwaukee cut off? or what kind is it? that thing is sick! 1:12
Link is in the description 😎
Its so small, Looks way too scary to take a ride in😳, i have to watch some of your previous videos on alum welding as i have a crack in a cast aluminum transfer case i need to fix but have never did any alum. welding.
Now we’re just waiting for you to hop in it on the water.
You and me both
how thick is the aluminum?
1/8" or 3 mm
So cool Alex! Arccaptain wants to invite you to test our TIG200P welder machine. Would you be interested in giving it a try?
Thank you for your like. Does this mean that you are willing to evaluate Arccaptain TIG200P welder? Please let me know, as it is important to us🥰.
What happened to the jet boat project!?
I need to get back to it been busy
I need to get back to it. Been busy
Boat size
6 ft or 2 m
@@amcustomfab thank you
Boop
That's awesome