Do you run a .325 or 3/8 chain? How much do you charge to port the 4910? I may have to pick one up LOL. It would be neat to see a ported 026 and this go head to head in a whack off.
Over l the years of setting almost any carb ever, I start 1&1/4 turn out "off the set" of all the jets. They will almost always start an run well enough to tune them from there. Saved me a lot of burned pistons adding a shot of fuel right to the carb on every fresh 2 cycle I've ever put together. Get em right off the bat and you'll know where the carb needs to go pretty quick. She runs though and that's a great place to start! It's always better to start a little rich an lean it out to tune it in. Fat saws always seem to tune in easier from my experience from starting out lean. I'm not sure why that is. Good work man she's a ripper for sure! Another little note is you can usually put it right in the wood when it's rich and see how the first cut goes and how long it takes to clean up if it will. Then you really can feel how far in you can go to get that optimal performance. Nothing against your method at all because it clearly work! But I like to share me experiences if I think it could be valuable advice.
Also my 4910 is pretty weak it’s bone stock. Wanted something lighter than the Timberwolf but was not super impressed. Guess they come alive when ya port and tune em. Grabbed me a 550xp cheap last week tho and that things plain stupid
Thank you Darrell! I'm going right now to chat with someone from UA-cam about it. I have multiple people complaining about the same thing. They can't find the Join button.
Okay Darrell, here's what I got: The "Join" button is not yet launched on some platforms. Viewers can, however, become members on desktop. You can still get access to perks on all available platforms if you sign up on desktop. The "Join" button will only appear on eligible video watch pages of participating channels.
Saw really hauls. Lot of people like the 4910/501P. I guess any saw is garbage if you beat the shit out of it! Not saying the owner or builder beat on this saw. Just my response to another BS comment. Keep up the good work.
Dude...... You be you and those that tell you to " act" a way that doesn't come " natural" to you can go be fakes somewhere else . Living ones life being fake for others acceptance is a sure sign of weakness .
When you said (just shy of 7min) that’ll work, it reminds me of “Animal Farm” by George Orwell when one of the characters says “that’ll do pig, that’ll do”. 😂
Yes I feel the same way. Fortunately they still have many available for sale. Thinking about picking up a second one. It’s the perfect small saw. Versatile enough for limbing or cuttting a 20 inch tree.
Be goofy all you want. It's called personality.
Runs good. I would recommend you do you….Yes, you are goofy….makes it more entertaining. From one gmf to another. 😊
Do you run a .325 or 3/8 chain? How much do you charge to port the 4910? I may have to pick one up LOL. It would be neat to see a ported 026 and this go head to head in a whack off.
Ported 4910 stomps a ported 026. I have two ported 026s and a ported 4910. Theres no comparsion
That thing really does rip!! I need to revisit 50cc saws.. been playing with 65+ for toooo long now!
Love my 4910 it came with a 20 once port3d they ate a wicked saw I'm a boring meffet the world needs goofy people
Over l the years of setting almost any carb ever, I start 1&1/4 turn out "off the set" of all the jets. They will almost always start an run well enough to tune them from there. Saved me a lot of burned pistons adding a shot of fuel right to the carb on every fresh 2 cycle I've ever put together. Get em right off the bat and you'll know where the carb needs to go pretty quick. She runs though and that's a great place to start! It's always better to start a little rich an lean it out to tune it in. Fat saws always seem to tune in easier from my experience from starting out lean. I'm not sure why that is. Good work man she's a ripper for sure! Another little note is you can usually put it right in the wood when it's rich and see how the first cut goes and how long it takes to clean up if it will. Then you really can feel how far in you can go to get that optimal performance. Nothing against your method at all because it clearly work! But I like to share me experiences if I think it could be valuable advice.
I’m a little scared 😂 lol I know the feeling
No doubts!!! LoL. I felt the same way with the NT 843, 543xp clone. 😂
@@dubbssawshop Haha I seen that video, it sucks those washers let go. Those buggers pull some rpm.
@@mfsaws8240 yes they do. Luckily the new one seems to be good so far. Pop Up piston and a OEM carb seems to be a good add on with the port work.
Also my 4910 is pretty weak it’s bone stock. Wanted something lighter than the Timberwolf but was not super impressed. Guess they come alive when ya port and tune em. Grabbed me a 550xp cheap last week tho and that things plain stupid
What more do you want from 50cc. Excellent work.
Runs pretty dang strong!!! 👍🏻, glad she no go pop!!!
Sounds a lot better, for a lot longer. I knew you would figure it out.😎 👍👍
Comment from me today 😊
Sounds good, nice saw 👍
Thanks!
You get today's nice guy award! 👍
@@walkerscountrylife
I’m try’n to figure out how to become a paid monthly subscriber…. Still can’t figure it out
Thank you Darrell! I'm going right now to chat with someone from UA-cam about it. I have multiple people complaining about the same thing. They can't find the Join button.
Okay Darrell, here's what I got: The "Join" button is not yet launched on some platforms. Viewers can, however, become members on desktop. You can still get access to perks on all available platforms if you sign up on desktop. The "Join" button will only appear on eligible video watch pages of participating channels.
@@novicelumberjack
Hopefully they can get it launched soon as I don’t have a desktop, just iPhone/iPad.
thumbs up
Saw really hauls. Lot of people like the 4910/501P. I guess any saw is garbage if you beat the shit out of it! Not saying the owner or builder beat on this saw. Just my response to another BS comment. Keep up the good work.
Dude...... You be you and those that tell you to " act" a way that doesn't come " natural" to you can go be fakes somewhere else . Living ones life being fake for others acceptance is a sure sign of weakness .
When you said (just shy of 7min) that’ll work, it reminds me of “Animal Farm” by George Orwell when one of the characters says “that’ll do pig, that’ll do”. 😂
Well done!
👍🆙BigGuy
Nice! Definitely a win!
I dyed my 4910 black just like that. Good contrast with the orange rear handle.
Pt a dam thing wrong with bein goofy man. Makes life way more fun bein silly in my opinion😊
U hit what i bren wantn 4910 pulln a 24in bar with authority.
You and your bore cuts lol Runs good
Hey shit happens
Good work sir
Sounds great👍🏻 it's a shame echo stopped production of the 4910's. Atleast we still have the 501p🥲
Yes I feel the same way. Fortunately they still have many available for sale. Thinking about picking up a second one. It’s the perfect small saw. Versatile enough for limbing or cuttting a 20 inch tree.
Don't forget about the Shindaiwa 492, same saw different color plastic.